Skip to content

Lego Edition. Quick start

Linar Yusupov edited this page Oct 22, 2022 · 1 revision
  1. Download firmware binaries into your Lego Edition. Follow these instructions ;

  2. Install LK8000 application onto your Android tablet from Google Play ;

  3. Execute the application, then select "FLY" mode ;

  4. Plug the Lego into the tablet's USB slot. Confirm connection of the app to the USB device in pop-up window, if necessary ;

  5. Touch "Menu" screen area:


  1. Select Config -> Config 2/3 -> LK8000 Setup -> Device Setup ,
    then choose connection settings as follows:


  1. Touch Terminal button. You should see a flow of NMEA messages, similar to shown on this picture:

  1. Return back to LK8000 main screen ;

  2. Move your tablet (with the Lego) into an area of good GPS/GLONASS reception and wait until it will pick satellites up. The app will show your current location on the map:



  1. Tap few times right to reach Radar View. When any other traffic (OGN Tracker or another SoftRF unit) is around - you should see it on this screen:



Hardware

SoftRF

SkyView

Flight Recorder

Adapters

Software

Firmware

Tools

Protocols

Clone this wiki locally