Farm Tools and Their Uses

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Farm Tools and their Uses

When it is viewed, the hand fork, looks like the kitchen fork
we eat with, just that it is a little bit bigger, it has a short
wooden or metal handle with four prongs. It is used in mixing
manure into the soil, for breaking the surface of the soil, so
that air and water, can pass easily and it is also used for the
removal of weeds on the seed bed.

It is boat shaped or it is either curved sloop metal blade that


is attached to a short wooden or metal handle. When using it,
you hold it with one hand. It helps in the transplanting of
seedlings, for the application of fertilizer and also for the
application of manure to the soil, it helps in loosening
vegetable beds, it can also be used for light weeding,
sampling or mixing up of soil and digging holes for the
planting of seeds

It is seen as a pair of an enlarged pair of scissors with two long blades,


connected at a appoint by a bolt and a nut of which the blades are sharpened at
one edge not the two sides in other not to injure some one.
The handle of the shears may be made of wood, metal, plastic or rubber. It is
usually handled with both hands. Shears are used to prune down trees or branches
of shrubs, trimming of hedges and trimming of Ornamental plants used in house
decoration.

It is made up of galvanized iron which prevents it from


rusting. Some are also made of very synthetic rubber.
The water watering can is made up of a tank, a handle
and a spout. This spout is long with a perforated metal
sheet over its mouth which is referred to as the ROSE,
but in case of the rubber made watering can the mouth
is covered by a rubber. It is used to apply water to
crops like seedlings in a nursery and vegetables. Some
times it is used in applying liquid fertilizers to crops as
well as the watering of cement blocks used for the
constructions of
structures and
buildings

The sickle has a curved metal blade that is fitted into a


short wooden handle. The inner part of the curved metal
blade is very sharp while the other part, has a blunt edge.
To recognise a sickle when been viewed, it has a structure
like that of a question mark (?). It used in the plucking of
fruits. This can only be possible, when it is tied to a long
handle, it can also be used to harvest cereals like rice,
wheat barley because they possess thin stems. It can also
be used in the harvest of grasses.

The pick axe is made up of a long wooden handle with a


double headed thick metal blade that is attached to the
handle through a loop. The head of the pick axe is made
up of two edges, one part of the end of the blade is
pointed, while the other end is flat and sharp edged.
They are mainly used for breaking up of hard soil, and
digging up of roots and tree stumps.

Farm Equipments and their Uses


There are several different types of seeders used to spread seeds into the ground.
The types of seeders used will depend on
the type of soil, type of plant and land area.
Disc seeders are used on clay and clay
loam soils. These are known as once-over
seeders; they place the seed in the ground
very fast, and only one pass on the field is
needed. Double-disc seeders are used
when the seed needs to be placed very
accurately into the soil. It is not suitable for
hard soils, as tillage is needed before using
the double-disc seeder. A double-disc press
drill is like a double-disc drill with the
addition of press wheels. The press wheel
will pack the soil over the seed once it has
been placed in the ground. Cultivator seeders are also known as air seeders and use
a stream of air to place the seed onto the field.
There are several different types of threshers as these machines are classified
based on how the crop is fed through the machine. A feeding type in which only a
part of the crop is fed into the machine allows for the straw to remain intact but has
a low throughput. A crop flow thresher moves the crop through the thresher, where

it is separated from the straw by being


crushed between a drum and outer casing.
Threshing elements, or the drum in the
center of the thresher, can have rasp bars,
peg teeth or wire loops attached.

Tractors are used for towing,


drawing and pulling heavy objects
and other pieces of farm machinery,
such as tillers. There are many
different types of tractors, as
specific tractors were designed for
specific jobs. The compact utility
tractor is used for land management and landscaping. The backhoe loader has
many uses, though it has a loader assembly on the front and a backhoe on the
back. This tractor can be used for loading trucks, construction, digging and tasks
that require very precise control. Garden tractors are small types of agricultural
tractors that are used to cut grass or for tilling, fertilizing and other tasks.

There are several different machines that


can be used for irrigation on the farm.
Sprayers, pumps and tubing are used.
Irrigation water will require pumps to
transfer the water through the system to
the desired field. There are several types
of sprinkler systems to provide water for
irrigation. These sprinklers can be fixed
in place or portable, normally towers on
wheels that carry the sprinkler system to
different fields. Watering cans can even
be used for smaller farm land where
manual irrigation is used

You might also like