Scribd Logo
Upload

Welcome to Scribd!

  • 107 views

    TCMO TSMC SB-3982 GB120dpi PDF

    Uploaded by

    Jerson De arco
    SABROE TCMO/TSMC two-stage reciprocating compressors are an economical alternative to single-stage compressors for smaller low-temperature refrigeration installations and medium-size industrial refrigeration installations involving a wide temperature range. The two-stage setup splits the temperature lift into two stages, reducing energy consumption and providing a relatively small footprint and high coefficient of performance. A range of eight models are available with swept volumes from 146 to 1018 m3/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TCMO TSMC SB-3982 GB120dpi PDF

    Uploaded by

    Jerson De arco
    107 views2 pages
    SABROE TCMO/TSMC two-stage reciprocating compressors are an economical alternative to single-stage compressors for smaller low-temperature refrigeration installations and medium-size industrial refrigeration installations involving a wide temperature range. The two-stage setup splits the temperature lift into two stages, reducing energy consumption and providing a relatively small footprint and high coefficient of performance. A range of eight models are available with swept volumes from 146 to 1018 m3/h.

    Original Title

    TCMO_TSMC_SB-3982_GB120dpi (1).pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    SABROE TCMO/TSMC two-stage reciprocating compressors are an economical alternative to single-stage compressors for smaller low-temperature refrigeration installations and medium-size industrial refrigeration installations involving a wide temperature range. The two-stage setup splits the temperature lift into two stages, reducing energy consumption and providing a relatively small footprint and high coefficient of performance. A range of eight models are available with swept volumes from 146 to 1018 m3/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    107 views2 pages

    TCMO TSMC SB-3982 GB120dpi PDF

    Uploaded by

    Jerson De arco
    SABROE TCMO/TSMC two-stage reciprocating compressors are an economical alternative to single-stage compressors for smaller low-temperature refrigeration installations and medium-size industrial refrigeration installations involving a wide temperature range. The two-stage setup splits the temperature lift into two stages, reducing energy consumption and providing a relatively small footprint and high coefficient of performance. A range of eight models are available with swept volumes from 146 to 1018 m3/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SABROE TCMO/TSMC two-stage reciprocating ­

    compressor units
    Two-stage versions of CMO and SMC reciprocating compressors,
    with swept volumes of 150–1000 m3/h

    SABROE TCMO/TSMC two-stage reciprocating compressors are an economical


    operating alternative to single-stage compressors in smaller low-temperature
    refrigeration installations.

    TCMO/TSMC compressor units are also ideal for medium-


    size industrial refrigeration installations that involve a big
    temperature range, such as freezer installations.
    Furthermore, these units are easy to customise with
    intermediate cooling systems.

    Using a two-stage set-up built together as a single unit


    helps avoid equipment duplication – and thus reduce
    costs and save space.

    Range

    Eight different models are available


    to provide swept volumes of
    between 146 and 1018 m3/h.

    TSMC 108 two-stage reciprocating compresor


    unit shown with closed flash inter-stage cooling
    system and Unisab lll systems controller

    Advantages Benefits Options

    Splitting the temperature lift into Two-stage installations are relatively  nisab III systems controller
    U
    two separate stages reduces overall cost-effective, which helps reduce Gauges, thermometers
    energy consumption energy costs and temperature/pressure
    control switches
    Relatively small footprint Can be installed in relatively small Oil level regulator (for use
    locations, or where space is limited in parallel systems)
    ATEX-compliant
    High coefficient of performance Low power consumption, which configuration
    (COP), with excellent performance greatly reduces operating costs Special vibration
    under part-load conditions dampening.

    Variable-speed drive (optional) Power consumption and operating


    provides stepless capacity control costs kept to a minimum
    over the entire operating range
    Intermediate cooling system options

    In plants with multiple two-stage compressors, TCMO/TSMC units


    can be connected to a shared intermediate cooler, in a separate
    installation.

    Alternatively, a range of built-on intermediate cooling systems are


    available, as optional equipment.
    Injection inter-stage gas cooling without liquid subcooling
    Injection inter-stage gas cooling with liquid subcooling in a shell-
    and-tube heat exchanger
    Closed flash inter-stage cooling in a shell-and-coil intermediate
    cooler, with liquid subcooling in the coil.

    Model Number of Swept Swept Nominal capacities in kW Unit dimensions in mm Weight Sound pressure Sound pressure
    cylinders volume at volume at R717 * excluding level at level at
    low/high- 1500 rpm 1800 rpm motor 1500 rpm 1800 rpm
    pressure side -40/+35 °C
    m3/h m3/h 1500 rpm 1800 rpm L W H kg dB(A) dB(A)
    TCMO 28 6/2 146 175 20 24 1400–1750 700 1000 500 68 70
    TCMO 38 6/2 170 205 23 28 1400–1750 700 1000 500 69 71
    TSMC 108 S 6/2 339 407 50 60 2311-2915 1052 1247 1746 80 82
    TSMC 108 L 6/2 424 509 66 79 2311-2915 1052 1247 1781 81 83
    TSMC 108 E 6/2 509 N/A 81 N/A 2311-2915 1052 1247 1796 81 83
    TSMC 116 S 12 / 4 679 814 100 121 3329–3737 1327 1445 2791 81 83
    TSMC 116 L 12 / 4 848 1018 133 159 3329–3737 1327 1445 2841 82 84
    TSMC 116 E 12 / 4 1018 N/A 163 N/A 3329–3737 1327 1445 2891 83 84

    * Other refrigerants are available on request. For TSMC


    Design pressure, HP side: 28 bar
    Nominal capacities are based on: Design pressure, LP side: 18 bar
    1500 rpm at 50 Hz. Differential pressure: 25 bar.
    1800 rpm at 60 Hz or VSD.
    Sound pressure levels in free field, over reflecting plane
    For R717 and one metre distance from the compressor block.
    2 K liquid subcooling, 0.5 K non-usable suction super-
    heat and liquid subcooling in intermediate cooler to 10 K
    above intermediate temperature.
    01.2018

    Min./max. speed R717

    For TCMO TCMO 20 700-1800 rpm


    PUBL-5640

    Design pressure, HP side: 28 bar TCMO 30 700-1800 rpm


    Design pressure, LP side: 18 bar
    TSMC S 500-1800 rpm
    Differential pressure: 25 bar.
    TSMC L 500-1800 rpm
    TSMC E 500-1500 rpm

    All information is
    subject to change
    without notice.
    Johnson Controls Denmark ApS . Sabroe Factory
    Christian X’s Vej 201 . 8270 Højbjerg . Denmark
    Phone +45 87 36 70 00 . Fax +45 87 36 70 05
    www.sabroe.com

    You might also like