SAB High-Pressure Screws SB-4106 GB120dpi

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SAB SABheat SABcontrol

SABROE screw compressors SABROE heat pumps SABROE control systems

SAB SABhe SABcontr l


SABROE SAB high-pressure screw compressor units
SABROE chiller units
® SABROE heat exchangers

Variable-speed high-pressure screw compressor


SABc ntrol SABco units
tr l with swept volumes of 100–4200 m3/hour,
for use with ammoniaSABROE
or CO as refrigerant
control2systems
C ntrols
SABROE controls equipment

These unique high-pressure compressor units are ideal for large site-built ammonia
heat pump installations that condense at either 90 °C or 72 °C. They are also the ideal
choice for larger CO2 systems or low-temperature two-stage freezer installations,
such as carbon dioxide–ammonia (R744–R717) cascade refrigeration systems.

Using CO2 as refrigerant makes it possible to make big savings on installation,


piping and compressor costs because a single compressor unit can replace multiple
compressors using traditional refrigerants.

SABROE® SAB high-pressure screw compressors


are specially designed for variable-speed
operation and maximum flexibility, doing away
with the traditional capacity limitations of slide-
valve technology. The capacity range of all SAB
models extends from 1000 rpm to maximum rpm.

The SAB 193, 233, 283 and 355 high-pressure


configurations, all ductile iron-cased versions
of the large SABROE compressor units,
provide substantial base load capacities
along with providing exceptional flexibility in
frequency converter operation. This ensures
the robustness and reliability derived from the
thousands of compressors in long-term service
in refrigeration plants worldwide.

SAB 193 high-pressure


screw compressor unit with
UniSAB systems controller

Advantages Benefits Options

High-pressure units designed Makes it possible to undertake  ariable-speed drive


V
specifically for applications that use freezing and defrosting in one single Thermosyphon and water-
CO2 or ammonia as refrigerant stage, or to utilise waste heat cooled oil coolers, with 3-way
oil temperature control valve
Stepless, skip-free capacity control Lowest possible operating costs and Liquid injection oil cooling
ensures that output always matches rapid return on investment (EZ Cool)
requirements Dual external oil filters
(SuperFilter II type)
Consistently high performance at both Maximum part-load efficiency and Complete economiser
full and part load low life cycle costs systems
Demand oil pump –
Space-saving small footprint, with Exceptional reliability and low controlled by UniSAB systems
fewer moving parts and very low maintenance costs controller
vibration Sensors and transmitters
for control by
Supports Condition Based Service Optimised service/maintenance external PLC
(CBS) schedules intervals, with a minimum of systems.
unscheduled downtime
For R717, 40 bar

Model Max. Swept Capacities in kW including economiser Capacities in kW including economiser Unit dimensions Weight excluding Sound pressure
rpm volume at +4/72 °C R717 at max. rpm +32/72 °C, R717 in mm motor/oil level at max. rpm
max. rpm COPline COPline
m³/h Cooling Heating Heating/cooling Cooling Heating Heating/cooling LxWxH kg dB(A)
SAB 193 HP 4200 1188 1270 1797 3.41/2.41 2822 3399 5.90/4.90 3150 x 1500 x 1800 2700 90
SAB 233 HP 3800 1890 2040 2866 3.47/2.47 4576 5466 6.15/5.51 3700 x 1700 x 2100 4600 90
SAB 283 HP 3000 2676 2853 4025 3.35/2.37 6475 7735 6.01/5.03 3700 x 1800 x 2250 5500 92
SAB 355 HP 3000 4192 4442 6265 3.35/2.37 10140 12126 5.97/4.99 4600 x 2400 x 3500 10000 93

For R717, 60 bar

Model Max. rpm Swept volume Capacities in kW R717 Unit dimensions Weight excluding Sound
at max. rpm Heating in mm motor/oil pressure level
m³/h +40/90  ° C +30/90  ° C +20/90  ° C LxWxH kg dB(A)
SAB 157 6000 596 2030 1740 1494 3300 x 1500 x 2100 2600 On request
SAB 273 3600 1680 5180 4780 3780 6000 x 1500 x 2100 ~5000 On request

For R744

Model Max rpm Swept volume Capacities in kW Unit dimensions Weight excluding Sound pressure
at max. rpm R744 in mm motor/oil level at max. rpm
m³/h -40/-5° C -50/-5° C LxWxH kg dB(A)
SAB 157 HR 6000 596 853 574 3300 x 1500 x 2100 2600 on request
SAB 193 HP 4200 1188 1711 1159 3150 x 1500 x 1800 2700 88
SAB 233 HP 3800 1890 2773 1875 3700 x 1700 x 2100 4600 88

All SABROE® high-pressure screw compressors


are available on request. Min./max. speed R717 and R744

SAB 157 1000-6000 rpm


40 bar design pressure: SAB 273 1000-3600 rpm
SAB 193 HP, SAB 233 HP, SAB 283 HP and SAB 355 SAB 193 1000-4200 rpm
HP. SAB 233 1000-3800 rpm
SAB 283 1000-3000 rpm
60 bar design pressure:
SAB 355 1000-3000 rpm
SAB 157 HR and SAB 273

Sound pressure levels measured in free field,


over reflecting plane and one metre from the
compressor block.
01.2019
PUBL-8592

All information is
subject to change
without previous Johnson Controls Denmark ApS
notice SABROE Factory
Christian X’s Vej 201 . 8270 Højbjerg . Denmark
Phone +45 87 36 70 00 . www.sabroe.com

You might also like