Updates for release 6.3.0

Updates for release 6.3.0

v6.2.1

Version 6.2.1 20180905
 * Fix possible ambiguity on command parameters if StateText contains numbers only (arendst#3656)
 * Fix Wemo emulation to select the first relay when more than one relay is present (arendst#3657)
 * Fix possible exception due to buffer overflow (arendst#3659)
 * Fix lost energy today and total energy value after power cycle (arendst#3689)

v6.1.1

Fix some wifi connection problems

v5.14.0

Release v5.14.0

v5.13.1

Release version 5.13.1

v5.12.0

5.12.0 20180209
* Change library PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to
1000 for Home Assistant  support
* Change relation of define MESSZ being dependent on PubSubClient.h
define MQTT_MAX_PACKET_SIZE
* Change command color parameter input checks to less strict for Home
Assistant support
* Change command Ina219Mode into command Sensor13
* Change commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal
and CurrentCal to be used for both Pow and S31 calibration
* Change commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet
and CurrentSet to be used for both Pow and S31 calibration
* Change uptime from hour to second resulting in a display of
123T13:45:21 where 123 is days
* Change module name Wemos D1 mini into Generic (arendst#1220)
* Change HTML from width=100% to style=width:100% supporting HTML5
(arendst#1358)
* Change OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to
allow slow networks (arendst#1556)
* Change WIFI_MANAGER_SEC into WIFI_CONFIG_SEC (arendst#1616)
* Change function pointers code to save code space and memory (arendst#1683)
* Change webserver argument processing gaining 5k code space (arendst#1705)
* Change weblog memory usage (arendst#1730, arendst#1793, arendst#1819)
* Update TasmotaSerial library to 1.1.0
* Update language files Italian (arendst#1594), Dutch (arendst#1723) and Spanish
(arendst#1722)
* Fix Non-English JSON temperature unit attachement
* Fix Arilux RF induced exception by moving interrupt handler to iram on
non ESP8266/Arduino lib v2.3.0
* Fix truncated command names and wrong response for DomoticzSwitchIdx
(arendst#1571)
* Fix %-sign issue as printf escape character in Humidity and Sonoff SC
(arendst#1579)
* Fix DS18B20 temperature JSON decimal dot (arendst#1561)
* Fix Energy JSON message (arendst#1621)
* Fix IRSend parameter translation (arendst#1636)
* Fix TSL2561 device detection (arendst#1644, arendst#1825)
* Fix BME680 teleperiod resistance measuring (arendst#1647)
* Fix Energy Monitoring Energy Today and Energy Total reading after
restart (arendst#1648)
* Fix IRReceive Data value (arendst#1663)
* Fix Energy Monitoring Energy Period roll-over (arendst#1688)
* Fix compiler warnings (arendst#1774)
* Fix command PWM response if no PWM channel is configured (arendst#1783)
* Add locale Decimal Separator to Web sensor page
* Add ColorTemperature to light status message
* Add command PowerOnState option 5 which inverts PulseTime and allows
for delayed always on after power on
* Add OtaMagic two step Web server OTA upgrade using filename-minimal
image if OTA free space is too small
* Add support for PMS5003 and PMS7003 particle concentration sensor
* Add command SetOption21 1 to allow Energy Monitoring when power is off
on Sonoff Pow and Sonoff S31 (arendst#1420)
* Add Chinese language file (arendst#1551)
* Add French language file (arendst#1561)
* Add Spanish language file (arendst#1589)
* Add HTTP Allow Cross Origin removed from ESP8266/Arduino lib v2.4.0
(arendst#1572)
* Add Home Assistant MQTT Discovery for switch and light to be enabled
by command SetOption19 1 (arendst#1534) or define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (arendst#1685)
* Add command State to retrieve device state information (same data as
teleperiod state and status 11 in slightly different JSON format)
* Add optional login to Webserver AP mode (arendst#1587, arendst#1635)
* Add command Sensor15 2 to start MHZ19(B) Zero Point Calibration
(arendst#1643)
* Add support for Sonoff S31 Smart Socket with Power Consumption
Detection (arendst#1626)
* Add command SetOption20 to allow update of Dimmer/Color/Ct without
turning power on (arendst#1719, arendst#1741)
* Add NTP sync time slot based on chip id (arendst#1773)
* Add cursor pointer to web button (arendst#1836)

v5.11.1

5.11.1 20180107
 * Fix Sonoff Pow command handling (arendst#1542)

v5.11.0

5.11.0 20180107
 * Minor webpage HTML optimizations (arendst#1358)
 * Updated
German translation (arendst#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (arendst#1289)
 * Change text to Active for 3
minutes (arendst#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (arendst#1357)
 * Change output of HTTP command to valid JSON
and Array only (arendst#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (arendst#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (arendst#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (arendst#1095, arendst#1294)
 * Fix PWM initialization in
Dimmer/Color mode (arendst#1321)
 * Fix Wemo Emulation (arendst#1357)
 * Fix display
of build date and time in non-english locale (arendst#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (arendst#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (arendst#735)

* Add support for BME680 using adafruit libraries (arendst#1212)
 * Add support
for MH-Z19(B) CO2 sensor (arendst#561, arendst#1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (arendst#1291)
 * Add support for
TSL2561 using adafruit library (arendst#661, arendst#1311)
 * Add support for SHT3x
(arendst#1314)
 * Add support for Arilux LC06 (arendst#1414)
 * Add Italian language
file (arendst#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(arendst#1357, arendst#1450)
 * Add define for additional number of WS2812 schemes
(arendst#1463)

v5.10.0

5.10.0 20171201
 * Upgrade library ArduinoJson to 5.11.2
 * Upgrade
library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols
(code size reduction)
 * Upgrade library NeoPixelBus to 2.2.9
 * Upgrade
library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table
(#define ONEWIRE_CRC8_TABLE 0) (code size reduction)
 * Update library
PubSubClient to 2.6 + 9 commits and additional delay (arendst#790)
 * Update
core_esp8266_wiring_digital.c to latest (staged) level
 * Patch library
I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility
 * Remove
command EnergyReset 1..3 now replaced by ENergyReset1 to EnergyReset3
 *
Remove spaces in JSON messages (code size reduction)
 * Renamed
xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library
OneWire and providing dynamic sensor scan
 * Fix possible iram1_0_seg
compile error by shrinking ICACHE_RAM_ATTR code usage
 * Fix PWM
watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (arendst#1146)
 *
Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code
(arendst#1181)
 * Fix blank console log window by using XML character encoding
(arendst#1187)
 * Fix wrong response name for command HlwISet (arendst#1214)
 * Fix
DHT type sensor timeout recognition by distinguish "signal already
there" from "timeout" (arendst#1233)
 * Add fixed color options 1..12 to
command Color
 * Add + (plus) and - (minus) to commands Dimmer
(+10/-10), Speed and Scheme
 * Add + (plus) and - (minus) to command
Color to select 1 out of 12 preset colors
 * Add + (plus) and - (minus)
to command Ct to control ColdWarm led ColorTemperature (+34/-34)
 * Add
commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3
0..42500000
 *  to (Re)set Energy Today, Yesterday or Total respectively
in Wh (arendst#406, arendst#685, arendst#1202)
 * Add optional ADS1115 driver as alternative
for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
 * Add support for
INA219 Voltage and Current sensor to be enabled in user_config.h with
define USE_INA219
 * Add support for Arilux LC11 (Clearing RF home code
when selecting no Arilux module)
 * Add support for WS2812 RGBW
ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE
(arendst#1156)
 * Add SettingsSaveAll routine to command SaveData to be used
before controlled power down (arendst#1202)
 * Add option PUSHBUTTON_TOGGLE
(SwitchMode 7) to allow toggling on any switch change (arendst#1221)
 * Add new
xdrv_05_ds18x20.ino free from library OneWire and add the following
features:
 *  Add support for DS1822
 *  Add forced setting of 12-bit
resolution for selected device types (arendst#1222)
 *  Add read temperature
retry counter (arendst#1215)
 *  Fix lost sensors by performing sensor probe at
restart only thereby removing dynamic sensor probe (arendst#1215)
 *  Fix
sensor address sorting using ascending sort on sensor type followed by
sensor address
 *  Rewrite JSON resulting in shorter message allowing
more sensors in default firmware image:
 *
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}

* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
 * Add clock support for more different
pixel counts (arendst#1226)
 * Add support for Sonoff Dual R2 (arendst#1249)
 * Add
FriendlyName to web page tab and add program information to web page
footer (arendst#1275)

v5.9.1

5.9.1 20171107
 * Add external sensor function pointer interface to
enable easy sensor addition
 * Add support for ADS1115 to be enabled in
user_config.h and needs libraries i2cdevlib-Core and i2cdevlib-ADS1115
(arendst#338, arendst#660)
 * Fix Backup Configuration file download failure by
defining proper file size (arendst#1115)
 * Fix Exception 26 and empty console
screen after usage of command WakeupDuration (arendst#1133)
 * Fix some changed
iTead web links in README.md (arendst#1137)