This utility manages the backlight of the ITE 8291r3 keyboard. It allows you to adjust the backlight brightness, set the keyboard backlight controller to one of the built-in modes and retrieve its status. It also provides the ability to customize mode speed, color(s), direction, brightness, whether the mode should respond to user input or be static, etc.

Furthermore, it can be configured using combined system (/etc/xdg/itectl.yml) and user (~/.config/itectl.yml) yaml configuration files and environment variables. The utility also allows you to name rgb colors and use those names as values for corresponding command options and configuration properties.

itectl makes several attempts to discover an ITE 8291 device (with a configurable timeout/interval) when the device cannot be found immediately. This feature is useful when executing the command directly after modprobing ITE 8291 module.

In addition, the project includes

• default configuration file;
• udev rules to make the ITE 8291 device accessible from user-space;
• initcpio hooks to configure keyboard backlight at boot time (useful, for example, when entering a passphrase to decrypt hard drive(s))
• bash, zsh and fish shells completions.

The following ITE 8291r3 devices are supported

• Vendor-ID: 0x048d, Product-ID: 0x6004;
• Vendor-ID: 0x048d, Product-ID: 0x6006;
• Vendor-ID: 0x048d, Product-ID: 0xce00.

itectl recognizes the following keyboard backlight modes: aurora, breath, fireworks, marquee, rainbow, raindrop, random, ripple, single-color, wave.

This project does not contain the ITE 8291r3 driver and requires it to be installed (e.g., from tuxedo-drivers) to work properly.

This project is highly inspired by ite8291r3-ctl. Under words "highly inspired", I mean that itectl supports practically the same functionality as ite8291r3-ctl. Of course, some ite8291r3-ctl commands are absent in itectl, but some new features have been added.

So why another project? ite8291r3-ctl is a great tool, but I lacks the following features that I needed.

• Ability to configure keyboard backlight mode properties (e.g., brightness, speed, color(s), etc.) using combined system and user configuration files and/or environment variables.

• Ability to retry discovery of ITE 8291 device if it cannot be detected immediately. This feature is useful when executing the utility directly after modprobing the ITE 8291r3 module (for example, during boot).

• Ability to execute the utility and configure the keyboard backlight during boot. This feature helps to enter information (such as a password to decrypt hard drive(s)) during boot. A Python script is not the best choice in this case. Small executable included in initramfs image will work better.

• It would also be nice to have shell completions, as well as udev rules and initcpio hooks.

These missing features led to the creation of this project. I wrote it for myself. If you need or like these new additional features, you can give this project a chance.

If you don’t, ite8291r3-ctl would be a better choice.

• The family of ite8291r3-ctl effect commands are implemented as corresponding "-mode" commands. For example ite8291r3-ctl effect wave is itectl wave-mode.

• The following commands were renamed:

  • ite8291r3-ctl monocolor -> itectl single-color-mode
  • ite8291r3-ctl off -> itectl off-mode
  • ite8291r3-ctl brightness -> itectl set-brightness
  • ite8291r3-ctl query --fw-version -> itectl firmware-version
  • ite8291r3-ctl query --brightness -> itectl brightness
  • ite8291r3-ctl query --state -> itectl state
  • ite8291r3-ctl palette --set-color -> itectl set-color

• ite8291r3-ctl palette --restore command is implemented as --reset flag of every "-mode" command.

• The values of the s|--speed option are reversed: a value of 0 indicates the slowest mode, 10 indicates the fastest.

All these changes are purely cosmetic. The functionality has not changed significantly.

The following commands were not implemented: ite8291r3-ctl test-pattern, ite8291r3-ctl freeze, ite8291r3-ctl palette --random, ite8291r3-ctl query --devices, ite8291r3-ctl mode --screen and ite8291r3-ctl anim.

• Configuration

  The system configuration file can be used to configure the itectl common and mode options, default mode, predefined and named colors, etc. The system configuration can be expanded or overridden using the user configuration file and/or environment variables.

• Named colors

  Any rgb color can be given a name that can be used as a value of the corresponding options and/or configuration properties.

• Device polling

  In cases where ITE 8291 device cannot be detected immediately, itectl will retry at the specified time intervals and stop after the specified timeout. This feature can be disabled.

• Additional system configuration files

  Furthermore, the project includes files that will help you configure the utility.

  • default documented itectl system configuration file.
  • udev rules to access ITE 8291 device from user-space.
  • initcpio hooks to configure keyboard backlight during boot time.
  • shells completions.

You can install itectl from AUR repository using your favorite aur helper. For example

yay -S itectl

Note: This project does not contain the ITE 8291r3 driver and requires it to be installed (e.g., from tuxedo-drivers) to work properly.

You can test the project using the go tool

go test ./...

You can build itectl by executing

go build

and copy it to a location in PATH. For example

sudo install -Dm 0755 -o root -g root ./itectl /usr/local/bin/

Default documented configuration file provided by the project can be used as the system configuration file

sudo install -Dm 0644 -o root -g root ./config/etc/xdg/itectl.yml /etc/xdg/

and/or the user configuration file

cp ./config/etc/xdg/itectl.yml ~/.config/

The udev rules provided by the project allow access to a discovered ITE 8291r3 device for users of the systemd input group. For the rules to take effect, they must be copied to one of the locations recognized by udev on your system. For example

sudo install -Dm 0644 -o root -g root ./config/usr/lib/udev/rules.d/10-ite8291r3.rules /etc/udev/rules.d/

The initcpio hook provided by the project is based on the ite_8291 module from tuxedo-drivers. If another ITE 8291 module is installed, ite_8291 must be replaced with this module name in config/usr/lib/initcpio/hooks/itectl.

This hook calls itectl without any options and uses the system configuration to set the default mode, device polling, named colors, etc. If you prefer a different solution, you can edit the hook config/usr/lib/initcpio/hooks/itectl and add additional options and/or environment variables.

The hook files must be copied to locations recognized by your system. For example, for arch systems

sudo install -Dm 0644 -o root -g root ./config/usr/lib/initcpio/hooks/itectl /usr/lib/initcpio/hooks
sudo install -Dm 0644 -o root -g root ./config/usr/lib/initcpio/install/itectl /usr/lib/initcpio/install

To work properly, the itectl hook must be included in the /etc/mkinitcpio.conf file after the udev hook. For example

HOOKS=(base udev autodetect itectl microcode modconf kms keyboard keymap consolefont block filesystems fsck)

Shells completions can be created using the itectl completion command. For example

# bash shell completions
itectl completion bash >>~/.bash_completion

# zsh shell completions
sudo zsh -c 'itectl completion zsh >/usr/share/zsh/site-functions/_itectl'
sudo zsh -c "chmod 'u+rw-x,go+r-wx' /usr/share/zsh/site-functions/_itectl"
sudo zsh -c 'chown root:root /usr/share/zsh/site-functions/_itectl'

# fish shell completions
mkdir -p ~/.local/share/fish/vendor_completions.d
itectl completion fish > ~/.local/share/fish/vendor_completions.d/itectl.fish

It's possible to configure itectl via

1. system configuration file: /etc/xdg/itectl.yml;
2. user configuration file: ~/.config/itectl.yml;
3. environment variables (starting with ITECTL_ prefix).

Both configuration files are merged. It's possible to add or override properties in system configuration file using the user configuration file and/or environment variables.

For instance

system configuration file /etc/xdg/itectl.yml

mode: rainbow
brightness: 25
reset: true
save: true
singleModeColor: "#FFFFFF"
predefinedColors:
  color1: "#FFFFFF"
  color2: "#FF0000"
  color3: "#FFFF00"
  color4: "#00FF00"
  color5: "#0000FF"
  color6: "#00FFFF"
  color7: "#FF00FF"
poll:
  interval: "100ms"
  timeout: "1s"
namedColors:
  barn_red: "#7C0A02"
  alloy_orange: "#C46210"
  carmine: "#960018"
  goldenrod: "#DAA520"
  melon: "#FEBAAD"

and user configuration file ~/.config/itectl.yml

mode: fireworks
brightness: 40
save: false
reactive: true
singleModeColor: melon
predefinedColors:
  color2: "#D1E231"
  color7: carmine
poll:
  timeout: 0
namedColors:
  purple: "#6A0DAD"
  steel_blue: "#4682B4"
  carmine: "0xC60010"

and environment variables

ITECTL_MODE=ripple
ITECTL_COLORNUM=3
ITECTL_PREDEFINEDCOLORS_COLOR3=#xDECC9C
ITECTL_PREDEFINEDCOLORS_COLOR2=purple

will result in the following default values

• default mode set to ripple

• default brightness - 40

• default reset - true

• default reactive - true

• default save - false

• default color number - 3

• default single-mode color - melon (#FEBAAD)

• device polling - disabled (timeout = 0)

• predefined colors set to

  1. #FFFFFF
  2. purple (#6A0DAD)
  3. #DECC9C
  4. #00FF00
  5. #0000FF
  6. #00FFFF
  7. carmine (0xC60010)

• named colors set to

  • barn_red = #7C0A02
  • alloy_orange = #C46210
  • goldenrod = #DAA520
  • melon = #FEBAAD
  • purple = #6A0DAD
  • steel_blue = #4682B4
  • carmine = 0xC60010

• mode - default mode to which the keyboard backlight controller is set if itectl is called with no command specified.
  Environment variable: ITECTL_MODE.

• brightness - brightness of the keyboard backlight.
  Minimum value: 0. Maximum value: 50. Default value: 25.
  Environment variable: ITECTL_BRIGHTNESS.
  Command line option(s): -b, --brightness.

• speed - speed of the keyboard backlight effect.
  Slowest effect: 0. Fastest effect: 10. Default value: 5.
  Environment variable: ITECTL_SPEED.
  command line option(s): -s, --speed.

• direction - direction of the keyboard backlight effect.
  Allowed values: none, left, right, up, down. Default value: right.
  Environment variable: ITECTL_DIRECTION.
  Command line option(s): -d, --direction.

• colorNum - number of the predefined color used in the keyboard backlight mode.
  No color: 0. Random color: 8. Customizable colors: 1-7. Default value: 8 (random color).
  Environment variable: ITECTL_COLORNUM.
  Command line option(s): -c, --color-num.

• reactive - determines whether the keyboard backlight effect should react to key-presses.
  Default value: false.
  Environment variable: ITECTL_REACTIVE.
  Command line option: --reactive.

• reset - specifies whether the customizable predefined colors should be reset to their corresponding configured/default values before setting the keyboard backlight controller to a mode. Used by all "-mode" commands.
  Default value: false.
  Environment variable: ITECTL_RESET.
  Command line option: --reset.

• save - indicates whether ITE 8291 controller should save its state.
  Default value: false.
  Environment variable: ITECTL_SAVE.
  Command line option: --save.

• singleModeColor - color the keyboard backlight controller uses in single color mode. The option value can be a name of one of the configured named colors or an rgb value in one of the following formats: 0xHHHHHH, #xHHHHHH, #HHHHHH, HHHHHH, #HHH, HHH.
  Default value: #FFFFFF.
  Environment variable: ITECTL_SINGLEMODECOLOR.
  Command line option(s): --color-name or --rgb or (--red and/or --green and/or --blue)

• poll - device probing related properties.

  • interval - time interval to wait between device detection attempts. The value is ignored if timeout is set to 0.
    Default value: 200ms.
    Environment variable: ITECTL_POLL_INTERVAL.
    Command line option: --poll-interval.

  • timeout - maximum duration of time to wait for an ITE 8291 device to be available. If set to 0, only one attempt to discover ITE 8291 device is made and if it is not detected, itectl returns immediately with non zero exit code.
    Default value: 0.
    Environment variable: ITECTL_POLL_TIMEOUT.
    Command line option: --poll-timeout.

  For instance

  
  poll:
    interval: "200ms"
    timeout: "500ms"
  
  

• device - device address related properties.

  • bus - bus number of the ITE 8291 device to use. If it's set to 0, the option is ignored.
    Default value: 0.
    Environment variable: ITECTL_DEVICE_BUS.
    Command line option: --device-bus.

  • address - number of the ITE 8291 device to use. If it's set to 0, the option is ignored.
    Default value: 0.
    Environment variable: ITECTL_DEVICE_ADDRESS.
    Command line option: --device-address.

  Both values must be either positive or non-positive (i.e., ignored). For instance

  
  device:
    bus: 1
    address: 2
  
  

• predefinedColors - values of the predefined customizable colors of the ITE 8291 keyboard backlight controller specified as a dictionary. Key has the format color<N>**, where <N> is one of the color numbers (1-7). The color value can be either a name of one of the configured named colors, or an RGB value in one of the following formats: 0xHHHHHH, #xHHHHHH, #HHHHHH, HHHHHH, #HHH, HHH.
  Default values:

  1. #FFFFFF
  2. #FF0000
  3. #FFFF00
  4. #00FF00
  5. #0000FF
  6. #00FFFF
  7. #FF00FF

  Example

  
  predefinedColors:
    color1: lemon
    color2: "#FFBF00"
    color3: coral
    color4: "#008000"
    color5: opal
    color6: "#B53389"
    color7: cyan
  
  

• namedColors - color name -> RGB color mapping. The color name can be an arbitrary string. The color value can be an RGB value in one of the following formats: 0xHHHHHH, #xHHHHHH, #HHHHHH, HHHHHH, #HHH, HHH. For instance

  
  namedColors:
    aero: "#7CB9E8"
    alloy_orange: "#xC46210"
    azure: "0x007FFF"
  
  

  The default configuration file provided by the project contains settings for all colors from the Wikipedia Lists of colors. Unfortunately, the color representation of the ITE 8291 keyboard backlight is not entirely accurate. Some colors look too greenish, some too bluish. This configuration property allows you to reconfigure any of these colors to your liking.

The following options are supported by every itectl command

• --config - path to the configuration file. If specified, system and user configuration files and environment variables are ignored.
• --poll-interval - timeout interval between attempts to detect an ITE 8291 device. The value is ignored if --poll-timeout is set to 0. It defaults to the configured value or 200ms if no value is configured.
• --poll-timeout - maximum duration of time to wait for an ITE 8291 device to become available. If set to 0, only one attempt is made to discover an ITE 8291 device, and if it is not found, itectl immediately returns with a non-zero exit code. It defaults to the configured value or 0 if no value is configured.
• --device-bus - bus number of the ITE 8291 device. If set to 0, the option is ignored. The default is the configured value or 0 if the value is not configured.
• --device-address - number of the ITE 8291 device. If it is set to 0, the option is ignored. The default is the configured value or 0 if the value is not configured.
• --help - prints help.

The following options are supported by -mode commands

• -b, --brightness - brightness of the keyboard backlight; minimum value: 0; maximum value: 50. The default is the configured value or 25 if the value is not configured.

• -s, --speed - speed of the keyboard backlight effect; slowest effect: 0; fastest effect: 10. The default is the configured value or 5 if the value is not configured.

• -d, --direction - direction of the keyboard backlight effect. The allowed values are none, left, right, up, down. The default is the configured value or right if the value is not configured.

• --color-num - number of the predefined color used in the keyboard backlight mode; no color: 0; random color: 8; customizable colors: 1-7. The default is the configured value or 8(random color) if the value is not configured.

• --reactive - if specified, the keyboard backlight effect will respond to key-presses. Defaults to the configured value, or false if no value is configured.

• --reset - if specified, the customizable predefined colors will be reset to their corresponding configured/default values before setting the keyboard backlight controller to a mode. Defaults to the configured value, or false if no value is configured. The customizable predefined color values default to the configured colors or the following

  1. #FFFFFF
  2. #FF0000
  3. #FFFF00
  4. #00FF00
  5. #0000FF
  6. #00FFFF
  7. #FF00FF

  colors if they are not configured.

• --save - if specified, the keyboard backlight controller will retain its state. Defaults to the configured value, or false if no value is configured.

• --color-name - name of the configured color.

• --rgb - rgb color in one of the following formats: 0xHHHHHH, #xHHHHHH, #HHHHHH, HHHHHH, #HHH, HHH.

• --red, --green, --blue - the corresponding red, green and blue parts of the color.

• aurora-mode - sets the keyboard backlight to aurora mode.
• breath-mode - sets the keyboard backlight to breathing mode.
• fireworks-mode - sets the keyboard backlight to fireworks mode.
• brightness - prints out brightness of the keyboard backlight.
• firmware-version - prints out firmware version of the keyboard backlight controller.
• marquee-mode - sets the keyboard backlight to marquee mode.
• off-mode - turns off the keyboard backlight.
• rainbow-mode - sets the keyboard backlight to rainbow mode.
• raindrop-mode - sets the keyboard backlight to raindrop mode.
• random-mode - sets the keyboard backlight to random mode.
• ripple-mode - sets the keyboard backlight to ripple mode.
• set-brightness - sets the keyboard backlight brightness to the specified value.
• set-color - sets the keyboard backlight custom predefined color specified via -c|--color-num option to the color specified by either --color-name or --rgb or (--red and/or --green and/or --blue) options.
• single-color-mode - sets the keyboard backlight to single-color mode. In this mode, all keys are assigned a single color, specified by either --color-name or --rgb or (--red and/or --green and/or --blue) options.
• state - prints out Off if the keyboard backlight is turned off by off-mode command. Otherwise it prints On (even if the brightness is set to 0).
• wave-mode - sets the keyboard backlight to wave mode.

• Implement -v|--verbose option.
• Implement mode's specific configuration (i.e. different configuration properties for different modes).

• ite8291r3-ctl is a great tool. If I didn't need a small executable instead of a Python script, I wouldn't create this project.
• ite-backlight
• tuxedo-drivers

• ite8291r3-ctl
• ite-backlight
• ite8291r2ctl

Keep coding and have fun. 🤘