Merge pull request ph1p#2 from ph1p/main

update from ph1p

README.md

@@ -95,16 +95,16 @@ also set username and password inside `upload.py`, if you want to use OTA Update
 
 Connect them like this and remember to set them in `include/constants.h` according to your board.
 
-| LCD | ESP32 | TTGO LoRa32 | NodeMCUv2 |
-| :--------------- | :----: | :---------: | :-------: |
-| GND | GND | GND | GND |
-| VCC | 5V | 5V | VIN |
-| EN (PIN_ENABLE) | GPIO26 | IO22 | GPIO16 D0 |
-| IN (PIN_DATA) | GPIO27 | IO23 | GPIO13 D7 |
-| CLK (PIN_CLOCK) | GPIO14 | IO02 | GPIO14 D5 |
-| CLA (PIN_LATCH) | GPIO12 | IO15 | GPIO0 D3 |
-| BUTTON one end | GPIO16 | IO21 | GPIO2 D4 |
-| BUTTON other end | GND | GND | GND |
+| LCD | ESP32 | TTGO LoRa32 | NodeMCUv2 |Lolin D32 (Pro) |
+| :--------------: | :----: | :---------: | :-------: | :------------: |
+| GND | GND | GND | GND | GND |
+| VCC | 5V | 5V | VIN | USB |
+| EN (PIN_ENABLE) | GPIO26 | IO22 | GPIO16 D0 | GPIO26 |
+| IN (PIN_DATA) | GPIO27 | IO23 | GPIO13 D7 | GPIO27 |
+| CLK (PIN_CLOCK) | GPIO14 | IO02 | GPIO14 D5 | GPIO14 |
+| CLA (PIN_LATCH) | GPIO12 | IO15 | GPIO0 D3 | GPIO12 |
+| BUTTON one end | GPIO16 | IO21 | GPIO2 D4 | GPIO25 |
+| BUTTON other end | GND | GND | GND | GND |
 
 <img src="https://user-images.githubusercontent.com/86414213/205999001-6213fc4f-be2f-4305-a17a-44fdc9349069.jpg" width="60%" />
 
@@ -190,9 +190,9 @@ pluginManager.addPlugin(new MyPlugin());
 
 # Ideas
 
-[] gifs
-[] animation upload
-[] use `<canvas />`
+- [ ] gifs
+- [ ] animation upload
+- [ ] use `<canvas />`
 
 ## Credits