New Keyboard: E8.5 TKL (#9447)

Co-authored-by: Ryan <[email protected]>

keyboards/exclusive/e85/config.h

@@ -0,0 +1,209 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4558 // EX
+#define PRODUCT_ID 0xE851 // E8.5 Version 1
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Exclusive
+#define PRODUCT E8.5 Hotswap PCB
+#define DESCRIPTION A custom TKL keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+// 0 1 2 3 4 5 6 7 8 9 A
+#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B6
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 6
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 18
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/exclusive/e85/e85.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+#include "e85.h"

keyboards/exclusive/e85/e85.h

@@ -0,0 +1,87 @@
+/* Copyright 2020 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+// This is the layout for the soldered PCB
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K74, K73, K76, K72, K71, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K94, K86, K82, K81, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K83, \
+ K40, K41, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, KA3, K92, \
+ K50, K51, K52, K56, K58, K57, K54, K53, KA6, KA2, KA1 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
+ { K50, K51, K52, K53, K54, KC_NO, K56, K57, K58 }, \
+ { KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \
+ { K70, K71, K72, K73, K74, K75, K76, K77, K78 }, \
+ { KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \
+ { KC_NO, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97, K98 }, \
+ { KC_NO, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8 }, \
+}
+
+// This is the layout for one hotswap PCB and can also be used on the soldered edition 
+#define LAYOUT_ansi_standard( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73, K76, K72, K71, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83, K86, K82, K81, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93, \
+ K40, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, K92, \
+ K50, K51, K52, K56, K58, K57, K54, K53, KA6, KA2, KA1 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
+ { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48 }, \
+ { K50, K51, K52, K53, K54, KC_NO, K56, K57, K58 }, \
+ { KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \
+ { K70, K71, K72, K73, KC_NO, K75, K76, K77, K78 }, \
+ { KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \
+ { KC_NO, KC_NO, K92, K93, KC_NO, K95, KC_NO, K97, K98 }, \
+ { KC_NO, KA1, KA2, KC_NO, KA4, KA5, KA6, KA7, KA8 }, \
+}
+
+// This is the layout for one hotswap PCB and can also be used on the soldered edition 
+#define LAYOUT_ansi_tsangan( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73, K76, K72, K71, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83, K86, K82, K81, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93, \
+ K40, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, K92, \
+ K50, K51, K52, K56, K57, K54, K53, KA6, KA2, KA1 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
+ { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48 }, \
+ { K50, K51, K52, K53, K54, KC_NO, K56, K57, KC_NO }, \
+ { KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \
+ { K70, K71, K72, K73, KC_NO, K75, K76, K77, K78 }, \
+ { KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \
+ { KC_NO, KC_NO, K92, K93, KC_NO, K95, KC_NO, K97, K98 }, \
+ { KC_NO, KA1, KA2, KC_NO, KA4, KA5, KA6, KA7, KA8 }, \
+}