[Keyboard] Wolfmark Club WM1 (#9121)

* do the basic port for the WM1

* with much help from tzarc, get the addresses correct

* make the keymap more closely mirror what the board has

* Add QMK Configurator support

* update the readme

* get indicator leds working

* enable RGB underglow

* fix up rgb underglow

* add notes regarding existence of backlight

* Update keyboards/wolfmarkclub/wm1/readme.md

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/config.h

* Update keyboards/wolfmarkclub/wm1/ld/wm1_f103.ld

* Update keyboards/wolfmarkclub/wm1/bootloader_defs.h

* Update keyboards/wolfmarkclub/wm1/config.h

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/wm1.c

* Update keyboards/wolfmarkclub/wm1/wm1.c

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/readme.md

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* Update keyboards/wolfmarkclub/wm1/rules.mk

* update readme

keyboards/wolfmarkclub/wm1/bootloader_defs.h

@@ -0,0 +1,11 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http:https://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103 does not have a USB bootloader in ROM -- the WM1
+// has a usermode USB mass storage device bootloader at the normal
+// boot address -- `0x08000000`.
+#define STM32_BOOTLOADER_ADDRESS 0x80000000