This Terraform example configurations uses the VMware vSphere provider to provision virtual machines on VMware and TerraForm Module ICP Deploy to prepare VMs and deploy IBM Cloud Private on them. This Terraform template automates best practices learned from installing ICP on VMware at numerous client sites in production.
This template provisions an HA cluster with ICP 3.1 enterprise edition. There is a smaller and simpler non-HA cluster with ICP 3.1 community edition terraform template available in this repository in the ce-template folder.
- Working copy of Terraform
- The example assumes the VMs are provisioned from a template that has ssh public keys loaded in
${HOME}/.ssh/authorized_keys
. After VM creation, terraform will SSH into the VM to prepare and start installation of ICP using the SSH private key provided. If your VM template uses a different user from root, update thessh_user
section in variables.tf - The template is tested on VM templates based on Ubuntu 16.04
-
Create a VM image (RHEL or Ubuntu 16.04).
-
The automation will create an additional block device at unit number 1 (i.e.
/dev/sdb
) for local docker container images and attempt to configure Docker in direct-lvm or overlay2 mode, depending on your operating system. RHEL 7.4 and older will default to devicemapper, RHEL 7.5 and newer will default to Overlay2. All supported Ubuntu versions will default to Overlay2. You may pre-install docker, but it must be configured in direct-lvm or overlay2 mode. For direct-lvm the block device must be set as the second disk. The simplest way of getting this to work is to create a template with a single OS disk without installing docker and let the automation configure direct-lvm or overlay2 mode as appropriate. -
Additional block devices are also mounted at various directories that hold ICP data depending on the node role. For instance, an additional block device at unit number 4 (i.e.
/dev/sdd
) with the possibility to use a different datastore than the other disks is mounted at/var/lib/etcd
. The reason for this is to allow the allocation of a different tier datastore with potentially better performance for I/O disk intensive ICP components such as ETCD.
-
-
Ensure that the
ssh_user
can callsudo
without password. -
Install any other needed packages:
- Shared storage clients, e.g. if the shared storage is NFS for the registry and audit directories, install NFS clients.
- In environments with restricted outbound internet, the terraform automation requires and attempts to install
PyYAML
. You can pre-install it into the template:yum install PyYAML
on RHELapt install python-yaml
on Ubuntu
- Install VMware Tools or
open-vm-tools
- For docker installation, install any additional pre-requisites:
yum install device-mapper libseccomp libtool-ltdl libcgroup iptables
on RHELapt install libtdl7 thin-provisioning-tools lvm2
on Ubuntu
- For RHEL templates, VMware guest customization requires
perl
. - For RHEL templates, either disable the firewall (
systemctl disable firewalld
), or addfirewall_enabled: true
toicp-config.yaml
. - For RHEL templates, VMware guest you most also install
yum install open-vm-tools
-
(optional) If you are not providing
image_location
, and have pre-installed docker, you can also pre-load the docker images from the ICP package you wish to install.tar xf ibm-cloud-private-x86_64-3.1.tar.gz -O | sudo docker load
-
Shutdown the VM Convert to a template, make note the name of the template.
The automation requires an HTTP or NFS server to hold the ICP binaries and docker packages. NFS storage is recommended as it can host these binaries and also the shared storage location for registry_mount_src
, audit_mount_src
, docker_package_location
and image_location
.
-
git clone or download the templates
-
Export your vSphere username and password into environment variables on the system you will run Terraform from. This can be done via the following commands:
export VSPHERE_USER={myusername}
replacing{myusername}
with your vSphere usernameexport VSPHERE_PASSWORD={mypassword}
replacing{mypassword}
with your vSphere password
-
Create a
terraform.tfvars
file to reflect your environment. Please see variables.tf and below tables for variable names and descriptions. Here is an exampleterraform.tfvars
file:####################################### ##### vSphere Access Credentials ###### ####################################### vsphere_server = "10.25.0.20" # Set username/password as environment variables VSPHERE_USER and VSPHERE_PASSWORD ############################################## ##### vSphere deployment specifications ###### ############################################## # Following resources must exist in vSphere vsphere_datacenter = "DC1" vsphere_cluster = "Cluster1" vsphere_resource_pool = "ICP31_pool/terraform_icp_31" network_label = "LabPrivate" datastore = "LabDatastore" datastore_etcd = "Tier0_LabDatastore" template = "ubuntu_1604_base_template" # Folder to provision the new VMs in, does not need to exist in vSphere folder = "terraform_icp_31" ################################## ##### ICP deployment details ##### ################################## ##### ICP instance name ##### # MUST consist of only lower case alphanumeric characters and '-' instance_name = "user1-icp-31" ##### Network ##### staticipblock = "10.30.0.0/24" staticipblock_offset = 2 gateway = "10.0.0.1" netmask = "16" dns_servers = [ "10.0.0.11", "10.0.0.12" ] # Cluster access cluster_vip = "10.30.0.1" cluster_vip_iface = "ens160" proxy_vip = "10.0.0.2" proxy_vip_iface = "ens160" ##### Local Terraform connectivity details ##### ssh_user = "virtuser" ssh_password = "SuperPa88w0rd" ##### ICP installation method ##### icp_inception_image = "ibmcom/icp-inception:3.1.0-ee" private_registry = "registry.example.com" registry_username = "myUsername" registry_password = "myPassword" ##### ICP admin user password ##### # Non default admin user password 'admin' recommended icppassword = "SuperPa88w0rd" ##### ICP Cluster Components ##### master = { nodes = "3" vcpu = "8" memory = "16384" docker_disk_size = "250" thin_provisioned = "true" thin_provisioned_etcd = "false" } proxy = { nodes = "3" vcpu = "4" memory = "8192" thin_provisioned = "true" } worker = { nodes = "3" vcpu = "8" memory = "16384" thin_provisioned = "true" } management = { nodes = "3" vcpu = "8" memory = "16384" thin_provisioned = "true" } va = { nodes = "2" vcpu = "8" memory = "16384" thin_provisioned = "true" } ##### NFS Server ##### registry_mount_src = "10.0.0.5:/storage/user1-icp-31/registry" audit_mount_src = "10.0.0.5:/storage/user1-icp-31/audit"
-
Run
terraform init
to download dependencies (modules and plugins) -
Run
terraform plan
to investigate deployment plan -
Run
terraform apply
to start deployment
Below you can find the different paths to install ICP on VMware.
-
Install from ICP binary package. In order to install ICP from it's binary package, we need to specify the
image_location
of the binary in theterraform.tfvars
file:##### ICP installation method ##### icp_inception_image = "ibmcom/icp-inception:3.1.0-ee" image_location = "nfs:<nfs_server_ip_address>:<path_within_your_nfs_server>/ibm-cloud-private-x86_64-3.1.0.tar.gz"
-
Install from a private Docker registry which does not require authentication. In order to install ICP from a previously configured (with ICP images loaded into) private Docker registry which does not require authentication, we need to specify the
private_registry
in theterraform.tfvars
file:##### ICP installation method ##### icp_inception_image = "ibmcom/icp-inception:3.1.0-ee" private_registry = "registry.example.com"
-
Install from a private Docker registry which requires authentication. In order to install ICP from a previously configured (with ICP images loaded into) private Docker registry which requires authentication, we need to specify the
private_registry
and its credentials,registry_username
andregistry_password
, in theterraform.tfvars
file:##### ICP installation method ##### icp_inception_image = "ibmcom/icp-inception:3.1.0-ee" private_registry = "registry.example.com" registry_username = "myUsername" registry_password = "myPassword"
name | required | value |
---|---|---|
vsphere_server |
yes | IP or hostname of vSphere server |
vsphere_user |
no, moved to environment variables | Username for vSphere server |
vsphere_password |
no, moved to environment variables | Password for vSphere user |
allow_unverified_ssl |
no | SSL certificate verification when connecting to vSphere, true by default. |
vsphere_datacenter |
yes | Name of the vSphere datacenter to deploy VMs to |
vsphere_cluster |
yes | Name of the vSphere cluster to deploy VMs to (must be under the vSphere datacenter) |
vsphere_resource_pool |
no | Path of the Resource Pool to deploy VMs to (must be under the vSphere cluster), will be in the format like /path/to/target , by default will add VMs to root resource pool in the cluster |
network_label |
yes | Network label to place all VMs on |
datastore |
yes | Name of the datastore to place all disk images in. |
datastore_etcd |
no | Name of the datastore to use for etcd storage. |
folder |
no | Name of the VM folder to create where all created VMs are placed in, if not supplied, will place in root folder. |
template |
yes | Name of the VM template to use to create all VM images |
Although the template defaults configure the cluster using DHCP addresses, it is strongly recommended to configure values for each of these variables so that the cluster is configured using static IP addresses.
name | value |
---|---|
VMware network | |
gateway |
Default gateway to configure for all VMs. Leave blank to retrieve from DHCP. |
netmask |
Number of bits, in CIDR notation, of the subnet netmask (e.g. 16). Set to 0 to retrieve from DHCP. |
dns_servers |
List of DNS servers to configure in the VMs. By default, uses Google public DNS (8.8.8.8 and 8.8.4.4 ). Set to blank to retrieve from DHCP. |
VM IP Calculation | |
staticipblock |
Subnet to place all VMs in, in CIDR notation. Ensure that the subnet has enough useable address for all created VMs. For example, 192.168.0.0/24 will contain 256 addresses. It is recommended to set this variable so that the cluster is configured with static IP addresses. The default is set to 0.0.0.0/0 to retrieve from DHCP (not recommended). |
staticipblock_offset |
Specify the starting offset of the staticipblock to begin assigning IP addresses from. e.g. with staticipblock 192.168.0.0/16, offset of 10 will cause IP address assignment to begin at 192.168.0.11. |
ICP Overlay network | |
network_cidr |
Container overlay network subnet; this subnet is internal to the cluster but should not overlap with other subnets in the environment. Default is 192.168.0.0/16 |
service_network_cidr |
Service network subnet; this is internal to the cluster but should not overlap with other subnets in the environment. Default is 10.10.10.0/24 |
name | default value | value |
---|---|---|
ssh_user |
root |
User that terraform will SSH as, must have passwordless sudo access. |
ssh_password |
<none> | Password for SSH user, needed to SSH in machines and add the Terraform-created SSH keys for password-less SSH installation |
docker_package_location |
<none> | location of ICP docker package, e.g. https://<myhost>/icp-docker-18.03_x86_64.bin or nfs:<myhost>:/path/to/icp-docker-18.03_x86_64.bin |
icp_inception_image |
ibmcom/icp-inception:3.1.0-ee |
Name of the icp-inception image to use. You may need to change it to install a different version of ICP. |
image_location |
<none> | location of ICP binary package, e.g. https://<myhost>/ibm-cloud-private-x86_64-3.1.0.tar.gz or nfs:<myhost>:/path/to/ibm-cloud-private-x86_64-3.1.0.tar.gz |
private_registry |
<none> | Private Docker registry to install ICP from. It should contain the appropriate ICP images |
registry_username |
<none> | Private Docker registry username |
registry_password |
<none> | Private Docker registry password |
instance_name |
icptest |
Name of the ICP installation. Will be used as basename for VMs. MUST consist of only lower case alphanumeric characters and '-' |
domain |
<instance_name>.icp |
Specify domain name to be used for linux customization on the VMs. |
The ICP configuration can further be customized by editing the icp-config.yaml file and by following the product documentation. The Terraform templates here expose the key variables that have infrastructure dependencies.
name | required | value |
---|---|---|
proxy_vip |
no | Virtual IP address for the Proxy Nodes. One of proxy_vip or proxy_lb_address must be set for HA. |
proxy_vip_iface |
no | Network interface to use for the Proxy Node virtual IP. Must be set if proxy_vip is set. |
cluster_vip |
no | Virtual IP address for the Master node console. One of cluster_vip or cluster_lb_address must be set for HA. |
cluster_vip_iface |
no | Network Interface to use for the Master node console. Must be set if cluster_vip is set. |
proxy_lb_address |
no | External load balancer address for the Proxy Nodes. One of proxy_vip or proxy_lb_address must be set for HA. |
cluster_lb_address |
no | External load balancer address for the Master node console. One of cluster_vip or cluster_lb_address must be set for HA. |
registry_mount_src |
yes | Source of the shared storage for the registry directory /var/lib/registry |
registry_mount_type |
no | Type of mountpoint for the registry shared storage directory. nfs by default. |
registry_mount_options |
no | Mount options to pass to the registry mountpoint. defaults by default. |
audit_mount_src |
yes | Source of the shared storage for the audit directory /var/lib/icp/audit |
audit_mount_type |
no | Type of mountpoint for the audit shared storage directory. nfs by default. |
audit_mount_options |
no | Mount options to pass to the audit mountpoint. defaults by default. |
icppassword |
yes | Password for the initial admin user in ICP. admin by default |
disable_management_services |
no | List of management services to disable. Default: ["istio", "vulnerability-advisor", "storage-glusterfs", "storage-minio"] |