Fixed broken links

LucidityCrash · Sep 29, 2018 · 63670e6 · 63670e6
1 parent 3295c7a
commit 63670e6
Showing 1 changed file with 2 additions and 2 deletions.
diff --git a/redox-w/README.md b/redox-w/README.md
@@ -38,7 +38,7 @@ You can refer directly to the [Mitosis-hardware repository](https://github.com/r
 | 1 | Right angle 0.1" header (1x4pin) | |
 | 2 | Straight 0.1" header (1x6pin) | |
 
-> :warning: To program the YJ-14015 MCUs you need an ST-Link v2 programmer, these can be found on eBay or Aliexpress for as little as 2$ shipped. See [picture below](https://github.com/mattdibi/redox-keyboard/tree/master/redox-w#nordic-mcus-firmware).
+> :warning: To program the YJ-14015 MCUs you need an ST-Link v2 programmer, these can be found on eBay or Aliexpress for as little as 2$ shipped. See [picture below](#nordic-mcus-firmware).
 
 #### Transmitters Assembly
 
@@ -52,7 +52,7 @@ Assemply steps:
  1. Solder the YJ-14015.
  2. Solder 1N4148 diodes.
  3. Solder slider switches.
- 4. Solder the battery holders. *Note*: Some solder is needed on the ground pad to contact properly with the battery. See [picture below]().
+ 4. Solder the battery holders. *Note*: Some solder is needed on the ground pad to contact properly with the battery. See [picture below](#battery-holder-installation-detail).
  5. Solder the programming headers.
 - Fit the PCBs inside their cases.
 - Add the switches to the plate.