Block or Report
Block or report Jymper
Contact GitHub support about this user’s behavior. Learn more about reporting abuse.
Report abuseLists (9)
Sort Name ascending (A-Z)
Stars
Language
Sort by: Recently starred
NES Emulator with SD card and menu support for the Raspberry PI Pico and other RP2040 based microcontrollers. Play your games from SD card on a HDMI display.
ZeroX is an interface between the RP2040 Zero and the original Xbox LPC header
PicoX is an interface between the Pi Pico and the original Xbox LPC header
RP2040-Zero adapter for Shalx's Modxo modchip for the Original Xbox.
Bambu Lab P1 Home Assistant Spaghetti Detection Integration.
This repository is dedicated to storing / collecting presets that have been meticulously crafted and optimized for use in 3D printing and slicing applications. Whether you're a 3D printing enthusi…
Flash ROM board that replaces the ROMs on longboard C64s with 3 24-pin ROM sockets
Flash ROM replacement for the 24 pol ROMs
https://www.youtube.com/watch?v=XIdoKzsOw2M
A HAT for the Raspberry Pi, that allows to emulate the Commodore C64 floppy disk drive 1541. Switches and IEC-Bus detachable.
This is a Kernal Adapter/Switch for the Commodore C64 long board
An Adaptor for the Character ROM of the Commodore C64
A replacement PSU for the Commodore C64, which works with 230V/115V
This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).
Allows use of regular EPROMS on Amiga 500 Rev 5 boards
Different Flash memory adapters for Amiga and other classic computers.
Ted Fried's MicroCore Labs Projects which include microsequencer-based FPGA cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects. …
A ReAgnus MegaAChip PCB that takes a Gowin FPGA with embedded PSRAM, a PLCC-84 plug and FET level shifters.
An Adapter to retrofit a 2MB agnus into a 1MB Amiga 500/2000
8MB Autoconfig FastRAM for Amiga 500/1000/2000/CDTV
8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500
Replace the old 44256 DRAM chips on your A500 with newer SRAM memory
Replace the old 44256 DRAM chips on your A500 with newer EDO memory
A full can crystal oscillator replacement using 3.3V SMD components for 5V systems.
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.