TOYOTA 5L - Kiwi Cylinder Heads

<strong>Kiwi</strong> <strong>Cylinder</strong> <strong>Heads</strong> Ltd31 Carbine Rd, Mt Wellington, AucklandTECHNICAL INFORMATION – <strong>TOYOTA</strong> <strong>5L</strong>ENGINE <strong>TOYOTA</strong> <strong>5L</strong>/T. P/N 10081059 ENGINE <strong>TOYOTA</strong> <strong>5L</strong>/T. P/N 10081059CAPACITY 2986cc TORQUE SETTINGS 20Nm / 78Nm / +90*/ +90*TYPE L4 HEAD BOLTS (TTY) YES / REPLACE WITH P/N 30086007CAMS SOHC HEAD GASKET SIZES mm 1.40 - 1.50 1.50 - 1.60 1.60 - 1.70VALVES 8 PISTON PROTRUSION mm 0.68 – 0.77 0.78 – 0.87 0.88 – 0.97CAM DRIVE BELT ROUGHNESS 1.5 / 1.8 umBORE / STROKE 99.5 x 96mm FIRING ORDER 1-3-4-2TURBO Y/N YES & NO IDLE SPEED 750-850 rpmFUEL DIESEL COMP. RATIO 22.3:1YEARS 1997-2005 VALVE LENGTH 104.3mm OVER ALLVALVE GAPS mm INLET 0.20 – 0.30 EXH. 0.40 – 0.50 FUEL DELIVERY IN-DIRECT INJECTIONASSEMBLY GUIDEDO THOROUGHLY CLEAN ALLMATING SURFACES.DO USE NEW HEADBOLTS.DO SERVICE THE INJECTORS.DO FLUSH THE ENTIRECOOLING SYSTEM OFREMAINING ANTI-FREEZE.DO LIGHTLY OIL HEADBOLTSINCL. UNDER THE HEAD &WASHER.DO NOT CLEAN BLOCKTHREADS WITH AN ENG. TAP.USE AN OLD HEADBOLT.DO NOT ADD ANTI-FREEZEUNTIL VEHICLE HASTRAVELLED MIN. 600KMS,WATER ONLY.DO RING US FOR ASSISTANCEwww.kiwicylinderheads.co.nz0800-549-429

<strong>Kiwi</strong> <strong>Cylinder</strong> <strong>Heads</strong> Ltd31 Carbine Rd, Mt Wellington, AucklandPlease ensure the camshaft seal housing and camshaft sealcenter on the camshaft after fitting housing. If not centeredthen oil leak may occur and the timing cover and timingequipment will need to be removed and re-fitted to rectify theleak. Please check at fitment. If deemed too out of alignmentthen removing the dowels and aligning and locking bolts downwill rectify.If you have any further queries please contact us on0800-549-429.www.kiwicylinderheads.co.nz0800-549-429