Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port.
To make it even easier to get started, we've assembled this Qwiic Cable Kit with a variety of Qwiic cables from 50mm to 500mm…
This polarized I2C cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly i…
1 Meter USB Type C to Type C cable USB 2.0 data transfer capabilities.
This is a 150mm long, 10-conductor cable that's especially ideal for many JTAG applications.
Once you've hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on yo…
These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of solid core wire in a cardboard dispe…
These 0.3m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the…
These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to…
This is a time saving kit of 140 jumper wires - cut, stripped, and pre-bent for your prototyping pleasure.
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audi…
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this…
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables…
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB…
This SMA to U.FL Cable is commonly used to connect boards with the compact U.FL connector to an enclosure wall. This allows a…
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the work…
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots.
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE …
These are 26 AWG jumper wires terminated as male to male. Use these to jumper from any female header on any board, to any oth…
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together …
These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board.…
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF los…
This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots.
These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
These are 26 AWG jumper wires terminated as female to female. Use these to jumper from any male header on any board, to any o…
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup…
The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based STEMMA …
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE c…
Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have…
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usual…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispens…
Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have th…
USB 2.0 type A to Micro-B 5-pin. This is a new, smaller connector for USB devices. Micro-B connectors are about half the heig…
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a male header on the other.
The is the official, 1m, micro HDMI to HDMI Cable for use with the Raspberry Pi.
This is a SparkFun exclusive! These are 26 AWG jumper wires terminated as male to female. Use these to jumper from any male o…
This is a basic SMA male to female connector cable at 1M in length and RG174 housing.
