USER MANUAL

NAME: GPS MOTORCYCLE TRACKER

GPS + GSM + SMS / GPRS

MODEL: GT100

PLEASE READ THE INSTRUCTIONS

BEFORE USING THE UNIT.
SAVE IT FOR USE IN THE FUTURE.

www.elmic.pl, [email protected]
Importer: ul. Słoneczna 110, NIP: 627-114-97-86
Przedsiębiorstwo Handlowo Usługowe FENIKS Nowa Kuźnica, 42-350 Koziegłowy REGON: 240243739
Cyprian Pawlaczyk Polska - Poland
Safety Warning & Attentions ............................................................................................................................. 3
1. Attention ............................................................................................................................................ 3
2. Attention for operation of this product ..................................................................................................... 3
3. Operation and maintenance .................................................................................................................. 3
Product Overview - Model: GT100 ...................................................................................................................... 3
1. Accessories: ........................................................................................................................................ 3
2. Appearance: ....................................................................................................................................... 4
3. Usage: ............................................................................................................................................... 4
4. Performance parameters: ...................................................................................................................... 4
5. LED Indicators Status: ............................................................................................................................... 5
Getting Start .................................................................................................................................................. 5
1. Install the SIM card .............................................................................................................................. 5
2. Install the device .................................................................................................................................. 5
3. Armed ............................................................................................................................................... 6
4. Wiring configuration ............................................................................................................................ 6
5. Device wiring diagram .......................................................................................................................... 6
6. Power ................................................................................................................................................ 7
Quick Operation Instructions ............................................................................................................................. 7
1. APN setting......................................................................................................................................... 7
2. DNS setting ......................................................................................................................................... 7
3. Add specific number (SOS number) .......................................................................................................... 7
4. Delete specific number .......................................................................................................................... 7
5. Set the center number .......................................................................................................................... 8
6. Delete the center number ...................................................................................................................... 8
7. Check parameter setting ....................................................................................................................... 8
8. Set GPS data upload interval .................................................................................................................. 8
9. Corners upload (ON as default) ............................................................................................................... 8
10. Armtime interval .............................................................................................................................. 8
11. Reboot device .................................................................................................................................. 9
Operation of device ......................................................................................................................................... 9
1. Check location ..................................................................................................................................... 9
2. Wire cut-off alarm (on as default) ........................................................................................................... 9
3. Low battery alarm (on as default) ........................................................................................................... 9
4. Vibration alarm ................................................................................................................................... 9
5. Moving alarm ..................................................................................................................................... 9
6. Oil cut-off ......................................................................................................................................... 10
7. Restoring Oil ..................................................................................................................................... 10
Web based tracking online activation ............................................................................................................... 10
Trouble shooting ........................................................................................................................................... 11
Warranty instructions and service .................................................................................................................... 11
Statement ................................................................................................................................................... 11

Strona 2 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 Introduction
Thank you for choosing this GPS Motorcycle Tracker. Please read this Manual carefully to fully understand its usage,
perfect functions and simple operation. This product not only provides tracking function but also provides cutting petrol or
electricity of your car to meet your requirements of monitoring comprehensively car security. The Company reserves the
right to modify this Manual from time to time without prior notice. Before using this product, please read these Attentions
carefully to ensure safe and proper operation of this product.

Safety Warning & Attentions

1. Attention
• Do not place this product on an uneven or unstable table-board to prevent failure or damage caused by falling.
• Only the battery designated by the Company can be used on this product. Application of other products may lead to
leakage, overheating, blowout and fire of the battery.
• Do not crash, vibrate, or throw device in order to avoid failure and fire.
• Do not use this product in a place with flammable and explosive gas; otherwise, product failure and fire may be
caused.
• Do not place this product in a place with high temperature, high humidity or large amount of dust; otherwise,
product failure may be caused.

2. Attention for operation of this product

• Do not dismantle or remodel this product, otherwise, damage, creepage and electrical fault may be caused to this
product.
• Place tiny metal objects such as drawing pin at a place far away from the speaker. As the speaker has magnetic
property while working, it will attract these tiny metal objects, which may lead to personal injuries or damage of the
speaker.

3. Operation and maintenance

• Please keep this product dry, as rainwater, moisture, humidity and liquids or moisture content may contain mineral
matters that erode the circuit.
• Do not keep this product in any place with high temperature. As high temperature may shorten the lifespan
of electronic device, damage the battery and cause deformation or melting of certain plastic parts and components.
• Do not keep this product in any place with low temperature. As when being moved from a place with low
temperature to a place with normal temperature, it may generate humidity inside, which may cause damage of circuit
board.
• Do not attempt to dismantle this product. As improper handling by nonprofessional personnel may cause damage of
the device.
• Do not toss, knock or shake this product, as tough operation mode may damage the motherboard inside the device.
• If this product is made wet by mistake, shut it down, remove the battery, and restart the product after confirming
it complete dry after 24 hours.
• Use clean and dry soft cloth to clean the lens, infrared lamp and light sensor.
Warning: improper operation will void warranty!

GPS Motorcycle tracker

Product Overview - Model: GT100
1. Accessories:
Device
Power cord
Relay
User Manual
Please make sure that all accessories are complete. Pictures are for indication and illustration purposes only.

Strona 3 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 2. Appearance:

3. Usage:
• for motorcycles
• for scooters
• for other vehicles

4. Performance parameters:

Serial Specifications Technical parameters

1 Dimension 87(L) x 59(W) x 19(H) mm
2 Weight 96g
3 Backup Battery 800mAh / 3.7V
4 Operation Temperature -25℃-60℃
5 Humidity 5% - 95%
6 Standby Time hours
7 GSM Frequencies 850/900/1800/1900 MHz
8 GPRS Class 12
9 GPS Channel 20
10 GPS Sensitivity -165dBm
11 Acquisition Sensitivity -148dBm
12 Position Accuracy 10m
13
TTFF (Open Sky) Cold Start ＜38s / Warm Start＜15s / Hot Start＜2s
14 GSM/GPS Antenna Built-in design
15 LED Indicator GSM-green, GPS-blue, Power-red
16 Data Transmit TCP, SMS
17 Geo-fence View any existing Geo-fence in the map
18 Low Power Alarm Alarm when backup battery is running out
19 Remote Control Cut off petrol/electricity

Strona 4 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 5. LED Indicators Status:

GPS LED Indicator – Blue

Status Implication

Quick Flashing Searching GPS signal

Slow Flashing GPS fix
OFF No GPS fix or initializing

GSM LED Indicator – Green

Status Implication
Quick flashing (interval 0.1s) GSM initializing
Slow flashing (flash 0.1s every 2s) Connected to GSM Network
OFF No GSM Signal or no SIM Card installed

Power Status – Red

Status Implication

Flashing (interval 0.1s) Low battery

Slow flashing (interval 0.2s) Full charge
Solid Red Charging
OFF Low battery/Power off / troubleshot
Notice: Ignition detection indication: three LED indicators take turns flashing.

Getting Start
Please follow below instructions for ensuring safe and correct use.

1. Install the SIM card

Place the SIM card into the device with the gold-colored side facing down.
Note: Make sure there is enough credit on the SIM card. If you will be using the GPRS function, you should pay
attention to the current SIM card GPRS charge.

2. Install the device

You need to choose somewhere that it won't be found, because the whole point of fitting covert GPS motorcycle tracker is
the secrecy element. Installation please refers to below picture.

• Under the back seat

• Inside the front cover
• Inside the tailing cover or plastic component
NOTE: 1. If the windshield is pasted with metal thermal-
protective coating, it may affect the performance of the device.
In this case, please change the installation place after
consulting the professional.
2. Any high power devices such as reversing radar, anti-theft
device or communication equipment would affect the signal of
the device.
3. All metallic cases of the windshield will attenuate the signal
on the tracking device. It’s simply due to the shielding effects of
the metal compound of the case.

Strona 5 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 3. Armed
When red/green/blue 3 LED lights are flashing twice in cycle, it means the terminal is armed.

4. Wiring configuration

Line No. Specification Color Instruction

1 V+ Red Positive pole
2 V- Black Negative pole
3 ACC Orange ACC on
4 Relay Yellow Relay controlled wire
5 TX Green Send data / for backup
6 RX Blue Receive data / for backup
7 GND Purple Ground wire

5. Device wiring diagram

1. Use multimeter to find out the negative pole of the
battery.
2. Use multimeter to find out the ACC wire. Method: Use
the red pen to connect with the ACC wire while the black
pen connects with the ground wire. In this condition, when
the ignition lock is off, the voltage is 0; when the ignition
lock is turned on, the multimeter will show the voltage.
3. The red line (positive pole) of the terminal cable should
be connected to the positive pole of the battery.
4. Follow the picture above to connect the wires.
5. When the terminal is connected to external power, insert
the SIM card into the terminal and the red indicator (power
indicator) should be normally on. When the ignition lock is
turned off, the red indicator should be flashing slowly.
6. The yellow wire of the relay control line should be
connected to the 86 as the picture shows.

Please choose the right relay (12V-standard)

for the proper installation.
Power Voltage – 9 - 12 V
Strona 6 z 11 rev. 1.0.1
www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 6. Power
Power ON
The terminal will be automatically on when you insert the SIM card into the SIM card slot. The battery will connect the
internal wires together in the terminal and the external power supply will start providing power to the device and also
charging the battery.
After the power is on, it will start searching the GSM and GPS signal. During this period, the green indicator (GSM
indicator) will be flashing while the blue indicator (GPS indicator) will be flashing quickly. When the blue indicator is
flashing slowly, it means GPS has located.
Power OFF
Pull out the SIM card, the terminal will be off.

Quick Operation Instructions

Operation Tips: To properly use the device, common parameters should be set before initial use. This can be done by using
the parameter editor or by sending SMS commands to the device. (“,"should be English comma and no space before and
after the comma)

1. APN setting
To connect default platform www.gpsyeah.com, please send the SMS command below:APN command format:
APN,APN's Name# e.g: APN,internet# (“internet” is the APN of carrier)
The device will reply “OK” if setting successfully.
Note: The APN of some countries have user name and password, you may need to send SMS command as following:
APN,APN name,user name,password# e.g: APN,internet,CLIENTE,AMENA#

2. DNS setting
To connect other platform, please send the two SMS commands bleow:
Command format：
SERVER,1,DNS,Port,0#
E.g: SERVER,1,www.gpsluckly.com,0088,0# (for internet platform www.gpsyeah.com)
It will reply “OK” after set successfully.

3. Add specific number (SOS number)

SMS command to the device to set the SOS number.
SOS,A,No.1,No.2,No.3#
“A” means to add new numbers, for example:
SOS,A, 13510905991,13510905992,13510905993#
If there is only one SOS number, you can appoint a specific number as SOS number. And the null means no adding.
For example:
SOS,A,13510905991# means to set the first number as SOS number
SOS,A,,13510905992# means to set the second number as SOS number
SOS,A,,,13510905993# means to set the third number as SOS number
If set successfully, there is a “success” reply SMS.

4. Delete specific number

Before deleting specific number, please check its corresponding code. For the code, please SMS “PARAM#” to the device.
SMS command to the device to delete the number.
SOS,D,serial NO.1,serial NO.2,serial NO.3#
“D” means to delete the number, for example:
SOS,D,1# means to delete the first number
SOS,D,3# means to delete the third number
If you want to delete more than one numbers, you can send this command:
SOS,D,1,3# means to delete the first and third numbers.
If you forget serial number of the mobile number you want delete, you can send this command:
SOS,D,mobile number# means to delete the mobile number directly.
For example:
SOS,D,13527852360# means to delete the 13527852360 directly.
After deleting the SOS number, it will receive “Delete number 135XXXXXXXX success! specific number total 2” for
successful deleting of the specific number.

Strona 7 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 5. Set the center number
If you want to cut off/restore oil by SMS command, you have to set a center number firstly. Only the center number can
send the cut off/restore oil command to the device. You can set your own mobile number as center number.
The command for setting center number is:
CENTER,A,mobile number#
For example: CENTER,A,15942703401#
If set successfully, there is an “OK” reply message.
NOTE：Only the SOS number can be used to set center number successfully.

6. Delete the center number

SMS command to the device to delete the center number.
The command is:CENTER,D#
For example: CENTER,D#
If set successfully, there is an “OK” reply SMS.
NOTE：Only the SOS number can be used to delete center number successfully.
Only SOS phone number can send this command successfully to set the center number. There is only one center number
can be set.

7. Check parameter setting

Send command to the terminal, you can check the parameter setting.
Command format: PARAM#
e.g.: PARAM#
Information replied:
IMEI: 353419032348877 ---IMEI number of the device;
GPRS Interval: 10,10; ---GPS data uploading Interval;
SENDS:5; --- the GPS working time when ACC is OFF;
SOS: 15942703401; --- SOS numbers, maximum 3 SOS numbers can be set and used for alarm and monitoring;
Center Number: 15942703401; ---only 1 center number can be set and used for cutting off /restoring oil command;
Sensoralm: 10,3,1,180 --- detect 3 vibrations in 10s; the alarm delay is 180s;
Defense time: 10; --- the defense delay is 10 minute;
TimeZone:E,8,0; --- set time zone; default as E8.
The replied information contains IMEI number, GPRS Interval, SENDS, SOS, center number, sensor time interval, defense
time and time zone.

8. Set GPS data upload interval

Upload by interval
The default upload interval is 20 seconds, which means every 20 seconds the terminal will upload its location data to the
platform. The interval can be set by sending SMS command: TIMER,T1,T2# (5≤T≤18000 seconds)
e.g. TIMER,20,30#
It means when ACC is on, GPS data upload interval is 20 seconds; when ACC is off, GPS data upload interval is 30 seconds.

Upload by distance
Send SMS command: DISTANCE,D# (100≤D≤10000 meters)
e.g. DISTANCE,300#
It means for every 300 meters, the terminal will upload GPS data to platform.
NOTE: if the upload interval is short, the GPRS current will add up. Please set the suitable upload interval.

9. Corners upload (ON as default)

The terminal will upload GPS data to the platform when the vehicle is turning (the turning angle reaches the pre-set
value).
NOTE: if the speed is too low during turning, the GPS data will be not able to upload to the platform.
Send SMS command: ANGLEREP,OFF#to turn it off.

10. Armtime interval

When the vehicle is turned off (ACC low) and stays off in 3 minutes, the terminal will enter arm status. During this status, if
the terminal detects 6 vibrations (default) and the vehicle still stays off (ACC off) in 30 seconds, it will activate vibration
alarm.
Send SMS command: DEFENSE,T#(1≤T≤60 minutes)
e.g. DEFENSE,15#
It means after 15 minutes the vehicle is turned off, the terminal will enter defense mode.
Strona 8 z 11 rev. 1.0.1
www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 11. Reboot device
When there is something wrong with the link of GPRS, e.g., The parameter setting of the device is correct, but you can't
track the car on the platform. At this moment you can send a command to the device to reboot the device.
The format is: RESET#
After receiving this command, the device will reboot after 1mins.

Operation of device
1. Check location
1. Via SMS
1.1 SMS “WHERE#”, to the SIM number of device. The device will send a location message automatically. You can get the
coordinates. If the device does not search any information of location, it will send “No data” to the cell phone.
Example:
Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28:51
1.2 SMS “URL#”, to the SIM number of device. The device will send a location Google Map link. If the device does not
search any information of location, it will send “No data” to the cell phone.
Example:
<Date Time： 10-11-23 23:42:51> https://maps.google.com /maps?q=N22.571490,E113.877103
2. Via platform
Go to the platform website offered by dealers to check your vehicle location.

2. Wire cut-off alarm (on as default)

When the electricity supply of device is cut off, it will activate cut-off alarm. In this case, the device will send related SMS
to the specific numbers and dial the numbers in circles. If nobody answers, the call just keeps 3 loops at most. At the
meantime, the device will upload SOS alarm data to the server. And it will send:
Cut Power！<Date Time:11-06-17 14： 53： 06>， https://maps.google.com/maps?q=N22576713,E113.916585
Send SMS command: POWERALM,OFF# to turn it off.
Note: The specific numbers should be preset

3. Low battery alarm (on as default)

When the device is only working with battery, once the internal voltage of battery is less than 3.7V, device will send low
battery alarm sms to specific number and alarm on platform.
Low battery alarm sms content example: “Attention!!!battery too low, please charge.” Which means the battery is to
low, to inform user charging it in time.
Send SMS command: BATALM,OFF# to turn off the alarm.
Note: The specific numbers should be preset

4. Vibration alarm
When the vehicle is turned off (ACC low) and stays off for 3 minutes (pre-set), the terminal will enter armstatus. During
this time, if the terminal detects 6 times vibrations(default) and the vehicle still stays off (ACC off) in 30 seconds, it will
activate vibration alarm. The terminal will upload longitude and latitude data to the platform. Then the platform will send
the google link to SOS number.
e.g.: “vibration alarm: <DateTime:10-11-23 23:42:51> https://maps. google.com/maps?q=N22.571490,E113.877103”
Note: 1.The SOS numbers should be preset.
2.Send “SENSOR, OFF#” to turn off the vibration alarm.

5. Moving alarm
Send SMS command: MOVING,ON,R#(100≤R≤1000 meters, 300 is recommended)
In the situation where ACC becomes low, if the vehicle is moved over 300 meters (pre-set) from the latest location, the
terminal will send moving alarm to the platform. SOS number will receive moving alarm message.
e.g. “Attention! The vehicle is moved. <DateTime:10-11-
2323:42:51>https://maps.google.com/maps?q=N22.571490,E113.877103”
Send SMS command: MOVING,OFF# to turn off the alarm

Strona 9 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 6. Oil cut-off
1. Via platform
Send oil cut-off command on platform. To make sure the security of vehicle, tracker can only indicate to cut off oil when
GPS is in valid position status, and the speed is less than 20KM/H or in static. Platform account password is needed when
sending oil cut off command.
2. Via SMS
Firstly, you should set a center number. Only center number can send the command to the device to cut off and restore
oil.
The format is: RELAY,1#
After the command is carried out, it will reply “Cut off the fuel supply: Success! Speed:0 Km/h”. If the command didn't
carry out, it will reply the reason about fail to carry out.
Note: To ensure the safety of the driver and the car, this command is valid only under two conditions: the GPS is
located; the speed is less than 20km/h

7. Restoring Oil
1. Via platform
When the alarm is off, sending recover oil commands manually. Device will restore oil supplying, and vehicle will work
normally again.
Platform account password is needed when sending oil cut off command.
2. Via SMS
Only center number can send the command to the device to restore oil.
The format is: RELAY,0#
After the command is carried out, it will receive “Restore fuel supply:Success!”

Web based tracking online activation

The GPRS web based tracking platform allows real time tracking with the latest Google maps. There is also a playback
feature that allows you to view where the vehicle has been for up to 30 days in the past making it ideal for fleet
management.

Strona 10 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER
 Trouble shooting
If you are having trouble with your device, try these troubleshooting procedures before contacting a service professional.

Problems Causes Solutions

Bad reception Near the tall building or in the basement Change to a place with good signal
The terminal cannot be
No battery power Change a new battery
turned on
Fail to connect platform The fuse blows Replace the fuse
ACC ignition disconnected Turn on ACC with key
Wrong installation of SIM card Check SIM card installation (Refer to 4.1 Install SIM card)
Filth on the SIM card iron surface. Clean it
Useless SIM Contact internet service provider
Improper installation Check installation of device (Refer to 4.2 Install the device)
Fail to connect Beyond GSM service area Use it in effective GSM service offer area
network Bad signal Try again in a better signal area
The voltage is unsuitable Connect with power with suitable voltage
Fail to charge Improper connection Check connection with charger
GPRS function is not activated Please contact the SIM card operator to activate GPRS
Cannot check - restart the terminal
Cannot get the position data
address information - contact with your supplier
It is not a SOS number set SOS number

Warranty instructions and service

1. The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of
purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. We reserve the
right to refuse warranty if this information has been removed or changed after the original purchase of the product from
the dealer.
2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of
the product itself.
3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has
been attempted by any unauthorized service centre.
4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty
period.
5. The warranty is not applicable to cases other than defects in material, design and workmanship.

Statement
All rights reserved.
Author instructions Shenzhen Concox Information Technology Co., Ltd.
Correction ELMIC / PHU FENIKS POLAND

Producer: Importer:
Shenzhen Concox Information Technology Co., Ltd. Przedsiębiorstwo Handlowo Usługowe FENIKS
China ul. Słoneczna 110,
Nowa Kuźnica, 42-350 Koziegłowy
Poland
www.concox.cn www.elmic.pl, [email protected]

Strona 11 z 11 rev. 1.0.1

www.elmic.pl, [email protected]
USER MANUAL: GT100 GPS MOTORCYCLE TRACKER