Preparations on the Big Pack Baler
The system screw (1) is held in place with a counter nut
(2) and must first be loosened for the system screw to
be adjusted. Then the counter nut can be tightened on
the housing again (by hand).
Screw the system screw (1) as far as it will go for:
Tractors with normal hydraulic system (constant pump)
Tractors with LS pump and message line that is not
connected
This adjustment is set when the unit
leaves the factory.
Unscrew the system screw (1) as far as it will go for:
– Tractors with a closed hydraulic system (for example
John Deere)
– Tractors with LS pump and message line that is
connected
III - 8
B3
A3
B2
A2
B1
A1
P
T
LS
2
1