EK–DS10S–UR. A01
A
S
DS10
LPHA
ERVER
USER REFERENCE CARD
This document is intended as a quick reference for
the user. Additional information can be found in
the AlphaServer DS10 / AlphaStation VS10 Console
Reference guide, EK-DS10S-CR.
Overview
•
Environmental Specifications
•
Mechanical Specifications
•
Electrical Specifications
•
Front Buttons and LEDs
•
Ethernet LEDs
•
Beep Codes
•
PCI Slots
•
Memory Configuration
•
SRM Console Commands
•
Remote Management Console
(RMC) Commands
•
Acoustics
WARNING: To prevent injury, access is limited
to persons who have appropriate technical
training and experience. Such persons are
expected to understand the hazards of working
within this equipment and take measures to
minimize danger to themselves or others.
CPU modules and memory modules have parts
that operate at high temperatures. Wait 2
minutes after power is removed before touching
any module. Wear an antistatic wrist strap
when working on this system.
© Digital Equipment Corporation 1999.
All rights reserved.
1
To reduce the risk of electrical shock or damage
to the equipment: Do not disable the power
cord grounding plug. The grounding plug is an
important safety feature. Plug the power cord
into a grounded (earthed) electrical outlet that
is easily accessible at all times. Disconnect
power by unplugging the power cord from the
electrical outlet or the workstation.
Environmental Specifications
Storage
–40º C to 66º C
temperature range
(–40º F to 151º F)
Operating
10º C to 40º C
temperature range
(50º F to 104º F)
Max. rate of change
11º C (20º F) per hour
Storage
10% to 90% relative humidity;
humidity range
maximum wet bulb 65º C
(noncondensing)
(149º F)
10% to 90% relative humidity
Operating
humidity range
(without removable media) or
(noncondensing)
20% to 80% relative humidity
(with removable media);
maximum wet bulb 2º C (36º F)
Nonoperating–4867 m (16,000
Max. altitude
ft.);
Operating—2400 m (8,000 ft.)
Nonoperating shock
30 G, 25 ms halfsine
Mechanical Specifications
Leave ventilation room at the front and rear of the
system.
Height
13 cm (5 in.)
Width
43 cm (17 in.)
Depth
46 cm (18 in.)
Weight
14.5 kg (32 lb)
Electrical Specifications
•
Check your power supply setting.
•
Secure the power cord by turning the safety
latch clockwise over the power cord. Secure
the latch by tightening it with a screwdriver.
PK1015
PK1047a