Introduction

This document describes the Freenom API at a technical level. It explains the supported data formats and how to interact with the API. For each function supported by the API a description is given including an example how such a function call and response may look.

Examples are given using the command line tool 'curl'. Curl is an easy tool to access any URL and is installed on most Unix like environments.

Data formats

The API delivers output in JSON format by default. If the API User prefers, output can be given in XML. The method of output is defined in the function call.

Example: Ping the service

Request

curl -X GET https://api.freenom.com/v2/service/ping

Response

{ "timestamp" : "2010-06-01 16:04:12 UTC",
    "result" : "PING REPLY",
    "status" : "OK"
    }

Example: Ping the service expecting XML output. Note the .xml behind the method name.

Request

curl -X GET https://api.freenom.com/v2/service/ping.xml

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>PING REPLY</result>
        <timestamp>2010-06-01 16:04:12 UTC</timestamp>
        <status>OK</status>
    </freenom>

Examples in this manual are given in XML for readability.

Interacting with Freenom API

Interaction with the API should be trivial. The service is a RESTful-like service that interacts over HTTPS. Of all the HTTP methods available, only GET and POST are used. GET calls retrieve information and do not change anything, while POST calls are meant to change data.

POST calls are idempotent for 30 seconds. This allows a caller to resubmit a transaction having it not being executed twice.

Common errors

Each function supported by the API has been documented thoroughly. Some errors can occur for a multiple of functions and are described in this chapter. This information will not be repeated in the related function description.

Function not found

In case an unsupported function is called, the service will reply the following:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<freenom>
    <error>No function called or function not supported</error>
    <status>error</status>
</freenom>

Not authorized

Most functions can only be executed by authorized users. For these functions authorization must take place. If the user is not authorized to make the call, the content returned will be:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<freenom>
    <error>No anonymous access, authorization required</error>
    <status>error</status>
</freenom>

Invalid data submitted

If the function itself is supported, but data submitted is invalid or missing an error will be reported. For example:

Request

curl -X GET "https://api.freenom.com/v2/domain/search.xml\
    ?domainname=------.tk\
    &domaintype=PAID"

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <status>error</status>
        <error>Invalid domainname</error>
    </freenom>

The status field will state 'error' when an error occurred. Whenever this field is set to 'error', an element will display the error found.

The service will always reply directly when a first error is found. If there are multiple errors in the function call, only one is returned. This stops the service from doing unnecessary work, as the call will fail in any case.

Function parameters

Commonly used parameters

A number of parameters are used in a multiple of functions. Other parameters deserve special attention. Those parameters are explained in this chapter.

domainname	The domain name involved. The domain name should consist of only a-z and 0-9 characters and the - (dash). The dash may not be in the beginning or end of the domain name. Domain names are not case sensitive
forward_url	If the domain is configured for forwarding, the URL to forward traffic for the domain to is given via the forward_url. The forward_url can be any HTTP or HTTPS URL.
nameserver	The nameserver. A nameserver needs to be a hostname that is resolvable if it's a hostname not under the domain name specified.
period	The period of domain registration or renewal. Paid domains are registered in number of years. Supported periods for Paid domains: 1Y, 2Y, 3Y, 4Y, 5Y, 9Y and 10Y. Free domains are registered in number of months. Supported periods for Free domains: 1M - 12M.
idshield	ID Shield is a FREE privacy service that is designed to protect you. Your personal information is not exposed in the WHOIS database, while emails are automatically forwarded - after human interface detection - to the email address we have on file. The two possible values of the parameter: enabled or disabled.

Supporting parameters

Supporting parameters are parameters that are not specific to a function call but to the API behavior.

test_mode	When set to 1, the function is discarded after execution. Any changes done to Freenom's database are rolled back.
method	If caller is unable to specify the method of the function by that method, this parameter can help. Setting the method parameter to 'post' will tell the service that a POST method is meant by caller. Same counts for 'get', 'put' and 'delete'.

The multiple flag

Function parameters are described in a table for each function. One of the columns in this table is labeled "multiple". This indicates whether or not the parameter can be specified more than once.

An example call would look like this:

curl -X POST https://api.freenom.com/v2/domain/register.xml\
-d “domainname=TEST001.TK\
&nameserver=NS1.TEST001.TK\
&nameserver=NS2.TEST001.TK\
&domaintype=PAID”

API functions

Ping the service

URL: https://api.freenom.com/v2/service/ping
Method: GET

Description: This function allows the user to check the status of the server. The server will return its latest timestamp.

Parameters: None.

Returned properties

Property	Description
result	PING REPLY
timestamp	YYYY-MM-DD HH24:MI:SS UTC
status	OK

Example:

Request

    curl -X GET https://api.freenom.com/v2/service/ping.xml

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>PING REPLY</result>
        <status>OK</status>
        <timestamp>2013-01-07 13:50:26 UTC</timestamp>
    </freenom>

Search for available domains

URL: https://api.freenom.com/v2/domain/search
Method: GET

Description: This function allows the API user to search a domain for availability.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
email	E-mail address used for authentication	No	No
password	Password used for authentication	No	No
domaintype	The type of the domain: PAID or FREE	Yes	No

Returned properties

Property	Description	Type
result	DOMAIN AVAILABLE or DOMAIN NOT AVAILABLE	Both
domain	One or multiple hashes with result of domain name search	Both
domainname	The domain name as requested	Both
domaintype	The domaintype of the searched domain name.	Both
pricing	Multiple hashes of pricing info for domainname.	Paid
currency	The currency for given prices	Paid
period	The registration period for given price.	Paid
partnerprice	The amount to be paid by the reseller	Paid
retailprice	The amount to be paid by the enduser. (public price)	Paid
status	AVAILABLE or NOT AVAILABLE	Both
status	OK	Both

Example: Check the availability of domain test001.tk

Request

    curl -X GET "https://api.freenom.com/v2/domain/search.xml\
    ?domainname=test001.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    &domaintype=PAID"

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST001.TK</domainname>
            <domaintype>PAID</domaintype>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>16.91</partnerprice>
                <period>2Y</period>
                <retailprice>19.90</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>21.04</partnerprice>
                <period>3Y</period>
                <retailprice>24.75</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>27.03</partnerprice>
                <period>4Y</period>
                <retailprice>31.80</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>21.25</partnerprice>
                <period>5Y</period>
                <retailprice>25.00</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>53.17</partnerprice>
                <period>9Y</period>
                <retailprice>62.55</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>42.46</partnerprice>
                <period>10Y</period>
                <retailprice>49.95</retailprice>
            </pricing>
            <pricing>
                <currency>EUR</currency>
                <partnerprice>8.46</partnerprice>
                <period>1Y</period>
                <retailprice>9.95</retailprice>
            </pricing>
            <status>AVAILABLE</status>
        </domain>
        <result>DOMAIN AVAILABLE</result>
        <status>OK</status>
    </freenom>

Register a domain

URL: https://api.freenom.com/v2/domain/register
Method: POST

Description: Use this function to register a domain.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
period	The period of registration. If not given it will default to 1Y for paid domains and will default to 3M for free domains	No	No
forward_url	The URL the domain name should forward to	No*	No
forward_mode	The type of forward. Can be cloak or 301_redirect. cloak is default.	No	No
nameserver	Nameserver to use. A minimum of 2 nameservers is required	No*	Yes
owner_id	Contact ID of domain owner	Yes**	No
billing_id	Contact ID of billing contact	No	No
tech_id	Contact ID of technical contact	No	No
admin_id	Contact ID of admin contact	No	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No
domaintype	The type of the domain: PAID or FREE	Yes	No
idshield	Identity protection parameter, possible values : enabled or disabled	No**	No
autorenew	Autorenewal setting for this domain. Possible values: enabled or disabled.	No	No

Notes: * forward_url and nameservers are mutual exclusive. Either the forward_url OR nameservers need to be specified. It is not possible to specify both. In case the nameserver is under the same domain, a glue record must be created for this domain. This can be done by registering Nameserver records.

** In case idshield is enabled owner_id doesn't need to be specified.

Returned properties

Property	Description	Type
result	DOMAIN REGISTERED or NOT AVAILABLE	Both
domain	One or multiple hashes with result of domain name registration	Both
currency	The currency for given prices	Paid
domainname	The domain name as requested	Both
domaintype	The domaintype of the checked domainname	Both
expirationdate	The date the domain will expire in YYYYMMDD	Both
period	The registration period of the registered domainname	Both
partnerprice	The amount to be paid by the reseller	Paid
retailprice	The amount to be paid by the enduser. (public price)	Paid
owner_id	Contact ID of domain owner	Paid
tech_id	Contact ID of technical contact	Paid
billing_id	Contact ID of billing contact	Paid
admin_id	Contact ID of administrative contact	Paid
status	REGISTERED or NOT AVAILABLE	Both
authcode	Generated authorization code	Paid
autorenew	Autorenewal flag. Either enabled or disabled.	Paid
status	OK	Both

Example: Registering a domain for 2 years with nameservers under the domain.

Request

    curl -X POST https://api.freenom.com/v2/domain/register.xml\
    -d "domainname=test001.tk\
    &period=2Y\
    &nameserver=ns1.test001.tk\
    &nameserver=ns2.test001.tk\
    &owner_id=JSMTH01\
    &email=john@smith.net\
    &password=68bb651cb1\
    &domaintype=PAID
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST001.TK</domainname>
            <domaintype>PAID</domaintype>
            <period>2Y</period>
            <currency>EUR</currency>
            <retailprice>32.50</retailprice>
            <partnerprice>15.60</partnerprice>
            <expirationdate>20100711</expirationdate>
            <owner_id>JSMTH01</owner_id>
            <billing_id>JSMTH01</billing_id>
            <admin_id>JSMTH01</admin_id>
            <tech_id>JSMTH01</tech_id>
            <authcode>88398480402849880</authcode>
            <autorenew>enabled</autorenew>
            <status>REGISTERED</status>
        </domain>
        <result>DOMAIN REGISTERED</result>
        <status>OK</status>
    </freenom>

Renew a domain name registration

URL: https://api.freenom.com/v2/domain/renew
Method: POST

Description: This function must be used to renew a domain registration.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
period	The period of registration. If not given it will default to 1Y for paid domains and will default to 3M for free domains	No	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	DOMAIN RENEWED or NOT AVAILABLE	Paid
domain	One or multiplehashes with result of domain name renewal	Both
currency	The currency for given prices	Paid
domainname	The domain name as requested	Both
domaintype	The domaintype of the checked domainname	Both
expirationdate	The date the domain will expire in YYYYMMDD	Both
period	The registration period of the registered domainname	Both
partnerprice	The amount to be paid by the reseller	Paid
retailprice	The amount to be paid by the enduser. (public price)	Paid
owner_id	Contact ID of domain owner	Paid
tech_id	Contact ID of technical contact	Paid
billing_id	Contact ID of billing contact	Paid
admin_id	Contact ID of administrative contact	Paid
status	RENEWED or NOT AVAILABLE	Both
status	OK	Both

Example: Renewal of paid domain TEST001.TK for three years.

Request

    curl -X POST https://api.freenom.com/v2/domain/renew.xml\
    -d "domainname=test001.tk\
    &period=3Y\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>DOMAIN RENEWED</result>
        <domain>
            <domainname>TEST001.TK</domainname>
            <domaintype>PAID</domaintype>
            <period>3Y</period>
            <currency>EUR</currency>
            <retailprice>32.50</retailprice>
            <partnerprice>15.60</partnerprice>
            <expirationdate>20100711</expirationdate>
            <owner_id>JSMTH01</owner_id>
            <billing_id>JSMTH01</billing_id>
            <admin_id>JSMTH01</admin_id>
            <tech_id>JSMTH01</tech_id>
            <status>RENEWED</status>
        </domain>
        <status>OK</status>
    </freenom>

Get info on registered domain names

URL: https://api.freenom.com/v2/domain/getinfo
Method: GET

Description: Retrieve information about a domain registered by the requesting user.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	DOMAIN LISTED	Both
domain	One or multiple hashes with result of domain name search	Both
domainname	The domain name as requested	Both
domaintype	The domaintype of the checked domainname	Both
expirationdate	The date the domain will expire in YYYYMMDD	Both
authcode	The authorization code	Paid
autorenew	Autorenewal flag. Either enabled or disabled.	Paid
pricing	Multiple hashes with pricing info for domain name	Paid
currency	The currency for given prices	Paid
period	The registration period of the checked domainname	Paid
partnerprice	The amount to be paid by the reseller	Paid
retailprice	The amount to be paid by the enduser. (public price)	Paid
status	ACTIVE or CANCELLED; Status of the domain	Both
forward_url	The URL the domain name should forward to	Both
forward_mode	The type of forward. Can be cloak or 301_redirect. cloak is default.	Both
nameserver	Zero or multiple hashes with nameserver info	Both
hostname	Hostname of nameserver	Both
ipaddress	IP address of nameserver if glue present	Both
owner_contact	Hash containing contact data of owner	Paid
contact_id	Contact ID of owner contact	Paid
contact_title	Title of contact; Mr, Mrs, etc.	Paid
contact_firstname	Firstname of contact	Paid
contact_middlename	Middle name of owner contact	Paid
contact_lastname	Lastname of owner contact	Paid
contact_organization	Organization name of owner (if any)	Paid
contact_address	Address of owner contact	Paid
contact_city	City of owner contact	Paid
contact_zipcode	Zipcode of owner contact	Paid
contact_statecode	Statecode (ISO 3166-2) of owner contact	Paid
contact_countrycode	Countrycode (ISO 3166-1) of owner contact	Paid
contact_phone	Phone number of owner contact	Paid
contact_fax	Fax number of owner contact	Paid
contact_email	Email address of owner contact	Paid
admin_contact	Hash containing contact data of admin	Paid
contact_id	Contact ID of admin contact	Paid
contact_title	Title of contact; Mr, Mrs, etc.	Paid
contact_firstname	Firstname of admin contact	Paid
contact_middlename	Middle name of admin contact	Paid
contact_lastname	Last name of admin contact	Paid
contact_organization	Organization name of admin (if any)	Paid
contact_address	Address of admin contact	Paid
contact_city	City of admin contact	Paid
contact_zipcode	Zipcode of admin contact	Paid
contact_statecode	Statecode (ISO 3166-2) of admin contact	Paid
contact_countrycode	Countrycode (ISO 3166-1) of admin contact	Paid
contact_phone	Phone number of admin contact	Paid
contact_fax	Fax number of admin contact	Paid
contact_email	Email address of admin contact	Paid
tech_contact	Contact ID of tech contact	Paid
contact_id	Contact ID of tech contact	Paid
contact_title	Title of contact; Mr, Mrs, etc.	Paid
contact_firstname	Firstname of tech contact	Paid
contact_middlename	Middlename of tech contact	Paid
contact_lastname	Lastname of tech contact	Paid
contact_organization	Organization name of tech (if any)	Paid
contact_address	Address of tech contact	Paid
contact_city	City of tech contact	Paid
contact_zipcode	Zipcode of tech contact	Paid
contact_statecode	Statecode (ISO 3166-2) of tech contact	Paid
contact_countrycode	Countrycode (ISO 3166-1) of tech contact	Paid
contact_phone	Phone number of tech contact	Paid
contact_fax	Fax number of tech contact	Paid
contact_email	Email address of tech contact	Paid
billing_contact	Hash containing contact data of billing contact	Paid
contact_id	Contact ID of billing contact	Paid
contact_title	Title of contact; Mr, Mrs, etc.	Paid
contact_firstname	Firstname of billing contact	Paid
contact_middlename	Middlename of billing contact	Paid
contact_lastname	Lastname of billing contact	Paid
contact_organization	Organization name of billing (if any)	Paid
contact_address	Address of billing contact	Paid
contact_city	City of billing contact	Paid
contact_zipcode	Zipcode of billing contact	Paid
contact_statecode	Statecode (ISO 3166-2) of billing contact	Paid
contact_countrycode	Countrycode (ISO 3166-1) of billing contact	Paid
contact_phone	Phone number of billing contact	Paid
contact_fax	Fax number of billing contact	Paid
contact_email	Email address of billing contact	Paid
status	OK	Both

Example: Customer retrieves info on domain TEST002.TK.

Request

    curl -X GET "https://api.freenom.com/v2/domain/getinfo.xml\
    ?domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <status>ACTIVE</status>
            <domaintype>PAID</domaintype>
            <domainname>TEST002.TK</domainname>
            <expirationdate>20150101</expirationdate>
            <autorenew>enabled</autorenew>
            <nameserver>
                <hostname>NS1.EXAMPLE.COM</hostname>
            </nameserver>
            <nameserver>
                <hostname>NS2.EXAMPLE.COM</hostname>
            </nameserver>
            <pricing>
                <currency>YTL</currency>
                <period>1Y</period>
                <partnerprice>8.75</partnerprice>
                <retailprice>12.50</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>2Y</period>
                <partnerprice>17.50</partnerprice>
                <retailprice>25.00</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>3Y</period>
                <partnerprice>22.75</partnerprice>
                <retailprice>32.50</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>4Y</period>
                <partnerprice>28.00</partnerprice>
                <retailprice>40.00</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>5Y</period>
                <partnerprice>33.25</partnerprice>
                <retailprice>47.50</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>9Y</period>
                <partnerprice>52.50</partnerprice>
                <retailprice>75.00</retailprice>
            </pricing>
            <pricing>
                <currency>YTL</currency>
                <period>10Y</period>
                <partnerprice>55.00</partnerprice>
                <retailprice>80.00</retailprice>
            </pricing>
            <owner_contact>
                <contact_id>8837012</contact_id>
                <contact_title>Mr.</contact_title>
                <contact_firstname>John</contact_firstname>
                <contact_lastname>Smith</contact_lastname>
                <contact_organization>A-Team</contact_organization>
                <contact_address>Main Road 1</contact_address>
                <contact_city>Los Angeles</contact_city>
                <contact_zipcode>90001</contact_zipcode>
                <contact_statecode>US-CA</contact_statecode>
                <contact_countrycode>US</contact_countrycode>
                <contact_phone>+1-310-123456</contact_phone>
                <contact_email>hannibal@a-team.tk</contact_email>
            </owner_contact>
            <admin_contact>
                <contact_id>8311112</contact_id>
                <contact_title>Mr.</contact_title>
                <contact_firstname>H.</contact_firstname>
                <contact_lastname>Murdock</contact_lastname>
                <contact_organization>A-Team</contact_organization>
                <contact_address>Main Road 1</contact_address>
                <contact_city>Los Angeles</contact_city>
                <contact_zipcode>90001</contact_zipcode>
                <contact_statecode>US-CA</contact_statecode>
                <contact_countrycode>US</contact_countrycode>
                <contact_phone>+1-310-123458</contact_phone>
                <contact_fax></contact_fax>
                <contact_email>murdock@a-team.tk<contact_email>
            </admin_contact>
            <tech_contact>
                <contact_id>8112992</contact_id>
                <contact_title>Mr.</contact_title>
                <contact_firstname>Bosco</contact_firstname>
                <contact_middlename>Albert</contact_middlename>
                <contact_lastname>Baracus</contact_lastname>
                <contact_organization>A-Team</contact_organization>
                <contact_address>Main Road 1</contact_address>
                <contact_city>Los Angeles</contact_city>
                <contact_zipcode>90001</contact_zipcode>
                <contact_statecode>US-CA</contact_statecode>
                <contact_countrycode>US</contact_countrycode>
                <contact_phone>+1-310-123457</contact_phone>
                <contact_fax></contact_fax>
                <contact_email>ba@a-team.tk</contact_email>
            </tech_contact>
            <billing_contact>
                <contact_id>7837012</contact_id>
                <contact_title>Mr.</contact_title>
                <contact_firstname>Templeton</contact_firstname>
                <contact_lastname>Peck</contact_lastname>
                <contact_organization>A-Team</contact_organization>
                <contact_address>Main Road 1</contact_address>
                <contact_city>Los Angeles</contact_city>
                <contact_zipcode>90001</contact_zipcode>
                <contact_statecode>US-CA</contact_statecode>
                <contact_countrycode>US</contact_countrycode>
                <contact_phone>+1-310-123451</contact_phone>
                <contact_fax></contact_fax>
                <contact_email>face@a-team.tk</contact_email>
            </billing_contact>
        </domain>
        <result>DOMAIN LISTED</result>
        <status>OK</status>
    </freenom>

Modifying a domain

URL: https://api.freenom.com/v2/domain/modify
Method: PUT

Description: If a domain's DNS settings or URL forwarding is to be updated, this function will offer functionality for that.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
forward_url	The URL the domain name should forward to	No*	No
forward_mode	The type of forward. Can be cloak or 301_redirect. cloak is default.	No	No
nameserver	Nameserver to use. Minimally 2 are needed	No*	Yes
owner_id	Contact ID of domain owner	No	No
admin_id	Contact ID of administrative contact	No	No
tech_id	Contact ID of technical contact	No	No
billing_id	Contact ID of billing contact	No	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No
idshield	Identity protection parameter, possible values : enabled or disabled	No	No
autorenew	Autorenewal setting for this domain. Possible values: enabled or disabled.	No	No

Returned properties

Property	Description	Type
domain	One or multiple hashes with result of domain name modification	All
domainname	The requested domain name	All
status	MODIFIED	All
result	DOMAIN MODIFIED	All
status	OK	All

Example: Modify domain TEST002.TK, having it forward to https://www.freedomregistry.com/

Request

    curl -X PUT https://api.freenom.com/v2/domain/modify.xml\
    -d "domainname=test002.tk\
    &forward_url=http%3A%2F%2Fwww.freedomregistry.com%2F\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST002.TK</domainname>
            <status>MODIFIED</status>
        </domain>
        <status>OK</status>
        <result>DOMAIN MODIFIED</result>
    </freenom>

Deleting a domain

URL: https://api.freenom.com/v2/domain/delete
Method: DELETE

Description: This function will delete the domain from the account. The domain name will immediately be available to other registrants once it has been cancelled.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
domain	One or multiple hashes with result of domain deletion	All
domainname	Domain name that was deleted	All
status	DELETED	All
result	DOMAIN DELETED	All
status	OK	All

Example: Delete TEST002.TK

Request

    curl -X DELETE https://api.freenom.com/v2/domain/delete.xml\
    -d "domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST002.TK</domainname>
            <status>DELETED</status>
        </domain>
        <result>DOMAIN DELETED</result>
        <status>OK</status>
    </freenom>

Restore a domain

URL: https://api.freenom.com/v2/domain/restore
Method: POST

Description: This function will restore a domain to the account if possible

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
domain	One or multiple hashes with result of domain restore	All
domainname	Domain name that was restored	All
result	DOMAIN RESTORED	All
status	RESTORED	All
status	OK	All

Example:

Request

    curl -X POST https://api.freenom.com/v2/domain/restore.xml\
    -d "domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST002.TK</domainname>
            <result>RESTORED</result>
        </domain>
        <result>DOMAIN RESTORED</result>
        <status>OK</status>
    </freenom>

Upgrade a domain

URL: https://api.freenom.com/v2/domain/upgrade
Method: POST

Description: Upgrade a free domain to paid domain

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No
owner_id	Contact ID of owner contact	No**	No
billing_id	Contact ID of billing contact	No	No
admin_id	Contact ID of admin contact	No	No
tech_id	Contact ID of technical contact	No	No
idshield	Identity protection parameter, possible values : enabled or disabled	No**	No
period	Number of years to add to domain expiration, after the domain has been upgraded.	Yes	Yes

Notes: ** In case idshield is enabled owner_id doesn't need to be specified.

Returned properties

Property	Description	Type
domain	One or multiple hashes with result of domain upgrade	All
domainname	Domain name that was upgraded	All
result	DOMAIN UPGRADED	All
status	UPGRADED	All
status	OK	All

Example: Upgrade a free domain to paid domain

Request

    curl -X POST https://api.freenom.com/v2/domain/upgrade.xml\
    -d "domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    &owner_id=SMTH23\
    &idshield=disabled
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST002.TK</domainname>
            <result>UPGRADED</result>
        </domain>
        <result>DOMAIN UPGRADED</result>
        <status>OK</status>
    </freenom>

List domains in account

URL: https://api.freenom.com/v2/domain/list
Method: GET

Description: Lists all domains under the account

Parameters

Parameter	Description	Required	Multiple
pagenr	Page number of results. Defaults to 1	No	No
results_per_page	Number of results per page. Defaults to 25	No	No
email	E-mail address used for authentication	No	No
password	Password used for authentication	No	No

Returned properties

Property	Description	Type
domain	One or multiple hashes with result of domain deletion	Both
domainname	The name of the domain	Both
domaintype	Type of the domain	Both
registrationdate	The date the domain was registered in YYYYMMDD	Both
expirationdate	The date the domain will expire in YYYYMMDD	Both
status	ACTIVE or CANCELLED; Status of the domain	Both
authcode	The authorization code	Paid
autorenew	Autorenewal flag. Either enabled or disabled.	Paid
result	DOMAINS FOUND	Both

Example:

Request

    curl -X GET "https://api.freenom.com/v2/domain/list.xml\
    ?email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <domain>
            <domainname>TEST001.TK</domainname>
            <domaintype>FREE</domaintype>
            <registrationdate>2013-03-11</expirationdate>
                <expirationdate>2014-03-11</expirationdate>
                <status>ACTIVE</status>
        </domain>
        <domain>
            <domainname>TEST003.COM</domainname>
            <domaintype>PAID</domaintype>
            <registrationdate>2013-01-11</expirationdate>
                <expirationdate>2014-01-11</expirationdate>
                <authcode>88djjkJLl1</authcode>
                <autorenew>enabled</autorenew>
                <status>ACTIVE</status>
        </domain>
        <result>2 DOMAINS FOUND</result>
    </freenom>

Register or modify a nameserver glue record

URL: https://api.freenom.com/v2/nameserver/register
Method: PUT

Description: When the domain's DNS is managed by custom nameservers and the nameservers are under the domain, nameserver glue records are required to get the domain working. Nameserver glue records can be registered using this function.

Parameters

Parameter	Description	Required	Multiple
domainname	Domain name of glue record	Yes	No
hostname	Domain name of glue record	Yes	No
ipaddress	Value of DNS record	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	NAMESERVER REGISTERED or NAMESERVER UPDATED	All
nameserver	One or multiple hashes with result of nameserver registration	All
domainname	Domain name of zone to add DNS record	All
hostname	The hostname of the glue record	All
ipaddress	The IP address of the glue record	All
status	REGISTERED or UPDATED	All
status	OK	All

Example: Register a nameserver glue for TEST002.TK

Request

    curl -X PUT https://api.freenom.com/v2/nameserver/register.xml\
    -d "domainname=test002.tk\
    &hostname=ns1.test002.tk\
    &ipaddress=192.168.1.2\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <nameserver>
            <domainname>TEST002.TK</domainname>
            <hostname>NS1.TEST002.TK</hostname>
            <ipaddress>192.168.1.2</ipaddress>
            <status>REGISTERED</status>
        </nameserver>
        <result>NAMESERVER REGISTERED</result>
        <status>OK</status>
    </freenom>

Deleting a nameserver glue record

URL: https://api.freenom.com/v2/nameserver/delete
Method: DELETE

Description: Nameserver glue records registered via the nameserver/register method can be deleted via this function. nameservers are under the domain, nameserver glue records are required to get the domain working. Nameserver glue records can be registered using this function.

Parameters

Parameter	Description	Required	Multiple
domainname	Domain name of glue record	Yes	No
hostname	The hostname to delete	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	NAMESERVER DELETED	All
nameserver	One or multiple hashes with result of nameserver delete	All
domainname	Domain name of zone	All
hostname	The nameserver that was deleted	All
status	DELETED	All
status	OK	All

Example: Register a nameserver glue for TEST002.TK

Request

    curl -X DELETE https://api.freenom.com/v2/nameserver/delete.xml\
    -d "domainname=test002.tk\
    &hostname=ns1.test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <nameserver>
            <domainname>TEST002.TK</domainname>
            <hostname>NS1.TEST002.TK</hostname>
            <status>DELETED</status>
        </nameserver>
        <result>NAMESERVER DELETED</result>
        <status>OK</status>
    </freenom>

Listing nameserver glue records under a domain

URL: https://api.freenom.com/v2/nameserver/list
Method: GET

Description: This function is used to retrieve a list of nameserver glue records registered under a domain name.

Parameters

Parameter	Description	Required	Multiple
domainname	The domain name to list nameserver glue for	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	ENTRIES - number of entries found	All
nameserver	Name for DNS record	All
domainname	The requested domain name	All
hostname	Value for DNS record	All
ipaddress	IP addres linked to the nameserver host	All
status	OK	All

Example: Requesting the DNS names registered under TEST002.TK

Request

    curl -X GET "https://api.freenom.com/v2/nameserver/list.xml\
    ?domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>2 ENTRIES</status>
            <nameserver>
                <hostname>NS2.TEST002.TK</hostname>
                <ipaddress>50.1.2.3</ipaddress>
                <domainname>TEST002.TK</domainname>
            </nameserver>
            <nameserver>
                <hostname>NS1.TEST002.TK</hostname>
                <ipaddress>192.168.1.2</ipaddress>
                <domainname>TEST002.TK</domainname>
            </nameserver>
            <status>OK</status>
    </freenom>

Functions related to contact management

Create or Modify contact

URL: https://api.freenom.com/v2/contact/register
Method: PUT

Description: Creating a new contact can be done with this function. The contact is not linked to any domain after being created; this needs to be done by new domain registration or modification.

Parameters

Parameter	Description	Required	Multiple
contact_organization	Organization name of contact	No	No
contact_title	Title of the contact	No	No
contact_firstname	First name of contact	Yes	No
contact_middlename	Middle name of contact	No	No
contact_lastname	Last name of contact	Yes	No
contact_address	Address of the contact	Yes	No
contact_city	City of the contact	Yes	No
contact_zipcode	Zipcode of the contact	Yes	No
contact_statecode	ISO-3166 code for state	Yes	No
contact_countrycode	ISO-3166 code for country	Yes	No
contact_phone	Phone number of contact (international format)	Yes	No
contact_fax	Fax number of contact (international format)	No	No
contact_email	Email address of contact	Yes	No
contact_id	ID of existing contact	No	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	CONTACT REGISTERED / CONTACT UPDATED	Paid
contact	One or multiple hashes with contacts affected	Paid
contact_id	ID of the registered or updated contact	Paid
status	REGISTERED / UPDATED	Paid
status	OK	Paid

Example: Register Contact

Request

    curl -X PUT https://api.freenom.com/v2/contact/register.xml\
    -d "contact_firstname=John\
    &contact_lastname=Smith\
    &contact_organization=A-Team\
    &contact_address=Main Road 1\
    &contact_city=Los Angeles\
    &contact_zipcode=90001\
    &contact_statecode=US-CA\
    &contact_countrycode=US\
    &contact_phone=+1-310-123456\
    &contact_email=hannibal@a-team.tk\
    &email=john@smith.net\
    &password=68bb651cb1\

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <contact>
            <contact_id>8837012</contact_id>
            <status>REGISTERED</status>
        </contact>
        <result>CONTACT REGISTERED</result>
        <status>OK</status>
    </freenom>

Delete contact

URL: https://api.freenom.com/v2/contact/delete
Method: DELETE

Description: Deleting a new contact can be done with this function. Contacts can only be deleted if they are not linked to any domain.

Parameters

Parameter	Description	Required	Multiple
contact_id	ID of contact	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	CONTACT DELETED	Paid
contact	One or multiple hashes with contacts affected	Paid
contact_id	ID of the deleted	Paid
status	DELETED	Paid
status	OK	Paid

Example: Delete Contact

Request

    curl -X DELETE https://api.freenom.com/v2/contact/delete.xml\
    -d "contact_id=8837012\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <contact>
            <contact_id>8837012</contact_id>
            <status>DELETED</status>
        </contact>
        <result>CONTACT DELETED</status>
            <status>OK</status>
    </freenom>

Get info on specific contacts

URL: https://api.freenom.com/v2/contact/getinfo
Method: GET

Description: List details of contacts under user account.

Parameters

Parameter	Description	Required	Multiple
contact_id	One or more contact id to get info on	Yes	Yes
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	CONTACTS LISTED	Paid
contact	Array of one or multiple contacts	Paid
contact_id	ID of contact	Paid
contact_title	Title of the contact	Paid
contact_firstname	First name of contact	Paid
contact_middlename	Middle name of contact	Paid
contact_lastname	Last name of contact	Paid
contact_organization	Organization name of contact	Paid
contact_address	Address of the contact	Paid
contact_city	City of the contact	Paid
contact_zipcode	Zipcode of the contact	Paid
contact_statecode	Country of contact	Paid
contact_countrycode	State of contact	Paid
contact_phone	Phone number of contact (international format)	Paid
contact_fax	Fax number of contact (international format)	Paid
contact_email	Email address of contact	Paid
contact_domain	Array of one or multiple domains contact is linked to	Paid
domainname	Name of domain contact is linked to	Paid
type	Contact type (owner, tech, admin or billing)	Paid
status	OK	Paid

Example: Get info on one contact_id

Request

    curl -X GET "https://api.freenom.com/v2/contact/list.xml\
    ?email=john@smith.net\
    &password=68bb651cb1\
    &contact_id=8837012\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>CONTACTS LISTED</result>
        <contact>
            <contact_id>8837012</contact_id>
            <contact_title>Mr.</contact_title>
            <contact_firstname>John</contact_firstname>
            <contact_lastname>Smith</contact_lastname>
            <contact_organization>A-Team</contact_organization>
            <contact_address>Main Road 1</contact_address>
            <contact_city>Los Angeles</contact_city>
            <contact_zipcode>90001</contact_zipcode>
            <contact_statecode>US-CA</contact_statecode>
            <contact_countrycode>US</contact_countrycode>
            <contact_phone>+1-310-123456</contact_phone>
            <contact_fax></contact_fax>
            <contact_email>hannibal@a-team.tk</contact_email>
            <contact_domain>
                <domainname>a-team.tk</domainname>
                <type>owner</type>
            </contact_domain>
        </contact>
        <status>OK</status>
    </freenom>

List contacts under account

URL: https://api.freenom.com/v2/contact/list
Method: GET

Description: List all contacts under users account.

Parameters

Parameter	Description	Required	Multiple
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	CONTACTS LISTED	Paid
contact	Array of one or multiple contacts	Paid
contact_id	ID of contact	Paid
contact_title	Title of the contact	Paid
contact_firstname	First name of contact	Paid
contact_middlename	Middle name of contact	Paid
contact_lastname	Last name of contact	Paid
contact_organization	Organization name of contact	Paid
contact_address	Address of the contact	Paid
contact_city	City of the contact	Paid
contact_zipcode	Zipcode of the contact	Paid
contact_statecode	Country of contact	Paid
contact_countrycode	State of contact	Paid
contact_phone	Phone number of contact (international format)	Paid
contact_fax	Fax number of contact (international format)	Paid
contact_email	Email address of contact	Paid
contact_domain	Array of one or multiple domains contact is linked to	Paid
domainname	Name of domain contact is linked to	Paid
type	Contact type (owner, tech, admin or billing)	Paid
status	OK	Paid

Example: List Contacts.

Request

    curl -X GET "https://api.freenom.com/v2/contact/list.xml\
    ?email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <result>CONTACTS LISTED</result>
        <contact>
            <contact_id>8837012</contact_id>
            <contact_title>Mr.</contact_title>
            <contact_firstname>John</contact_firstname>
            <contact_lastname>Smith</contact_lastname>
            <contact_organization>A-Team</contact_organization>
            <contact_address>Main Road 1</contact_address>
            <contact_city>Los Angeles</contact_city>
            <contact_zipcode>90001</contact_zipcode>
            <contact_statecode>US-CA</contact_statecode>
            <contact_countrycode>US</contact_countrycode>
            <contact_phone>+1-310-123456</contact_phone>
            <contact_fax></contact_fax>
            <contact_email>hannibal@a-team.tk</contact_email>
            <contact_domain>
                <domainname>a-team.tk</domainname>
                <type>owner</type>
            </contact_domain>
        </contact>
        <status>OK</status>
    </freenom>

Functions related to domain transfers

Get price of a domain transfer

URL: https://api.freenom.com/v2/domain/transfer/price
Method: GET

Description: Transfers are made by gaining partners that use an obtained authorization code from the registrant or the losing partner. All transfers are subject to a one year renewal. Before a transfer is made the gaining partner may request the retail price and partner price of the transfer (and therefore the one year renewal). This API call only provides prices and does not perform the actual transfer.

Parameters

Parameter	Description	Required	Multiple
domainname	The domainname	Yes	No
authcode	The authorization code	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
transfer	Array of one or multiple transfers	Paid
domainname	Domain name updated	Paid
domaintype	Type of the domain	Paid
period	Length of renewal after transfer; always 1Y	Paid
currency	The currency for given prices	Paid
retailprice	Price for registrant	Paid
partnerprice	Price for partner	Paid
result	PRICES PROVIDED	Paid
status	OK	Paid

Example: Request transferprice for TEST002.TK

Request

    curl -X GET https://api.freenom.com/v2/domain/transfer/price.xml?\
    domainname=test002.tk\
    &authcode=7738977ABCDF889001\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <transfer>
            <domainname>TEST002.TK</domainname>
            <currency>EUR</currency>
            <period>1Y</period>
            <retailprice>12.50</retailprice>
            <partnerprice>1.00</partnerprice>
            <status>OK</status>
            <domaintype>PAID</domaintype>
        </transfer>
        <result>PRICES PROVIDED</result>
    </freenom>

Request a domain transfer

URL: https://api.freenom.com/v2/domain/transfer/request
Method: POST

Description: Transfer requests are performed by resellers that wish to transfer domain names from other resellers or registrars to their own account.
Please note: A domain transfer for a .TK, .ML, .CF, .GA or .GQ domain will be directly approved if the request has the correct authorization code.

Parameters

Parameter	Description	Required	Multiple
domainname	The name of the domain	Yes	No
authcode	The authorization code	Yes	No
period	Number of years to renew the domain. Defaults to 1Y	Yes	No
owner_id	contact_id of new owner	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	TRANSFER REQUESTED	Paid
transfer	Array of one or more transfers	Paid
domainname	Domain name updated	Paid
status	REQUESTED	Paid
status	OK	Paid

Example: Transfer domain TEST002.TK to our account

Request

    curl -X POST https://api.freenom.com/v2/domain/transfer/request.xml\
    -d "domainname=test002.tk\
    &authcode=7738977ABCDF889001\
    &period=1Y\
    &email=john@smith.net\
    &owner_id=JSMITH001\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <transfer>
            <domainname>TEST002.TK</domainname>
            <status>REQUESTED</status>
        </transfer>
        <result>TRANSFER REQUESTED</result>
        <status>OK</status>
    </freenom>

Approve a domain transfer

URL: https://api.freenom.com/v2/domain/transfer/approve
Method: POST

Description: Approve an outgoing domain transfer.

Parameters

Parameter	Description	Required	Multiple
domainname	The domainname	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	TRANSFER APPROVED	Paid
transfer	Array of one or more transfers	Paid
domainname	Domain name updated	Paid
status	APPROVED	Paid
status	OK	Paid

Example: Approce transfer of domainTEST002.TK from our account.

Request

    curl -X POST https://api.freenom.com/v2/domain/transfer/approve.xml\
    -d "domainname=test002.tk\
    &email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <transfer>
            <domainname>TEST002.TK</domainname>
            <status>APPROVED</status>
        </transfer>
        <result>TRANSFER APPROVED</result>
        <status>OK</status>
    </freenom>

Decline a domain transfer

URL: https://api.freenom.com/v2/domain/transfer/decline
Method: POST

Description: Decline an outgoing domain transfer.

Parameters

Parameter	Description	Required	Multiple
domainname	The domain name	Yes	No
reason	Reason of declining the transfer	Yes	No
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	TRANSFER DECLINED	Paid
transfer	Array of one or more transfers	Paid
domainname	Domain name updated	Paid
status	DECLINED	Paid
status	OK	Paid

Example: Decline a domain transfer of TEST002.TK from our account.

Request

    curl -X POST https://api.freenom.com/v2/domain/transfer/decline.xml\
    -d "domainname=test002.tk\
    &reason=no_payment\
    &email=john@smith.net\
    &password=68bb651cb1\

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <transfer>
            <domainname>TEST002.TK</domainname>
            <status>DECLINED</status>
        </transfer>
        <result>TRANSFER DECLINED</result>
        <status>OK</status>
    </freenom>

List current domain transfers

URL: https://api.freenom.com/v2/domain/transfer/list
Method: GET

Description: Retrieve a list of domain transfers. Domain transfers that are in final status approved or declined will be listed for a week after the transfer update.

Parameters

Parameter	Description	Required	Multiple
email	E-mail address used for authentication	Yes	No
password	Password used for authentication	Yes	No

Returned properties

Property	Description	Type
result	TRANSFERS LISTED	Paid
transfer	Zero, one or multiple entries containing information about the domain transfer	Paid
domainname	The name of the domain	Paid
transfertype	Incoming or outgoing	Paid
status	Status of the transfer. PENDING, APPROVED, DECLINED	Paid
newregistrar	In case of outgoing transfer, name of new registrar	Paid
lastupdate	Date of last update	Paid

Example: Retrieve a list of domain transfers

Request

    curl -X POST https://api.freenom.com/v2/domain/transfer/list.xml\
    -d "email=john@smith.net\
    &password=68bb651cb1\
    "

Response

    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <freenom>
        <transfer>
            <domainname>TEST002.TK</domainname>
            <transfertype>INCOMING</transfertype>
            <status>PENDING</status>
            <lastupdate>2013-02-14 13:03:11</lastupdate>
        </transfer>
        <transfer>
            <domainname>TEST0009.TK</domainname>
            <transfertype>OUTGOING</transfertype>
            <newregistrar>Freenom Inc.</newregistrar>
            <status>APPROVED</status>
            <lastupdate>2013-02-16 09:00:34</lastupdate>
        </transfer>
        <result>2 TRANSFERS LISTED</result>
        <status>OK</status>
    </freenom>

Introduction

Data formats

Interacting with Freenom API

Common errors

Function not found

Not authorized

Invalid data submitted

Function parameters

Commonly used parameters

Supporting parameters

The multiple flag

API functions

Ping the service

Search for available domains

Register a domain

Renew a domain name registration

Get info on registered domain names

Modifying a domain

Deleting a domain

Restore a domain

Upgrade a domain

List domains in account

Register or modify a nameserver glue record

Deleting a nameserver glue record

Listing nameserver glue records under a domain

Functions related to contact management

Create or Modify contact

Delete contact

Get info on specific contacts

List contacts under account

Functions related to domain transfers

Get price of a domain transfer

Request a domain transfer

Approve a domain transfer

Decline a domain transfer

List current domain transfers

Services

Partners

About Freenom

Support

Contact