Triforce
From Sega Retro
Triforce | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer: Sega, Namco | |||||||||||||||||
|
The Triforce (トライフォース) is an arcade board developed in a joint venture between Sega, Nintendo, and Namco.[1] It was also the result of a partnership between Sega and Namco that started a few months prior to the board's reveal.[2] The Triforce is based on the Nintendo GameCube video game console to reduce development costs, and allowed for arcade ports of home console games, and vice versa. It is named after the magical, often sought-after object in Nintendo's The Legend of Zelda series.
While the platform was shared between the three companies, Nintendo was not in the business of producing arcade games at the time, so it licensed its properties to Sega and Namco. Sega was the first to launch a game for the system with Virtua Striker 2002 in the Autumn of 2002[3], which shipped on Sega's propietary GD-ROM format (with later releases doing the same). Namco would not release a game for the system until 2005, and would ship its software on ROM cartridges.
In 2012, a homebrew application was released for the Wii that enabled this GameCube-derived console to run Mario Kart Arcade GP and its sequel (see the list below). The coder stated that support for other games and additional features are possible but emphasised that he would not be releasing homebrew or information due to his anger at others in the homebrew scene who had leaked his work.[4]. Another homebrew project, Nintendont, allows players to play Triforce games on the WiiU's vWii, with unknown limitations.
Contents
Hardware
Main board
The Triforce unit is based off of Nintendo's retail GameCube, so much so that the main board is a stock Japanese NTSC-J DOL-001 motherboard from the GameCube with a different boot ROM. The main board is connected to 2 to 3 different boards depending on configuration, but is always sandwiched between the Base Board and the Media Board. Since the main board is the same as a retail GameCube, you could theoretically use a regular NTSC-J motherboard to replace a faulty mainboard, however this is challenging due to the different boot ROM. In addition, a DOL-001 would be needed; the DOL-101 motherboard omits the Serial Port 2, Digital AV and Power Board connectors making the system unable to connect properly to the Triforce hardware; however, the regular GameCube DOL-001 motherboard will still boot and display using the Triforce hardware, at which point the Media Board will crash the GameCube if connected, and the VGA output will be restricted to 15KHz only as the retail GameCube is only designed for TV use. Likewise, the Triforce mainboard will work in the standard GameCube case, but will crash with the message "MEDIA BOARD IS NOT FOUND" when it tries to load SegaBoot in the second bootstrap phase. The Analogue A/V port of a Triforce main board works as expected.
Media board
The Triforce has three versions; the Type 1 and Type 3 plus a revision only Namco used for using ROM carts instead of using GD-ROMs. The DIMM board used on several Sega arcade systems such as the Sega NAOMI and Chihiro connects to a Media Board which acts as an interface to either adapt the Sega NAOMI's DIMM board to the system or contains the entire Network enabled DIMM board instead; this is what differentiates the Type 1 Triforce to a Type 3, the Type 1 uses the regular DIMM board and the Type 3 has the board all contained. In Namco's ROM board version the media board has the same network functionality as the Type 3 (and Type 1 if using a network enabled DIMM) but instead of using the GD-ROM drive it has an internal NAND based ROM cartridge and an SD card slot which was left unused. Most games will only either work with the Type 1 or Type 3 units and only the Namco ROM games can work with the ROM system.
The Media Board also contains the actual BIOS of the system as the main board's IPL is only a bootstrap that loads the main code from the Media Board.
Base board
The base board seems almost universal and is used in all versions of the system for the same function. It connects to the GameCube's controller port header, power board connector, the Serial Port 1, and the Digital AV port, the latter ports left unused usually. This board connects the motherboard to the power from the JVS power input, the digital AV to converter circuitry to be able to connect two VGA monitors and two RCA sound outputs, the GameCube controller port to circuitry to adapt the JVS input and to the expansion headers on the side. Whilst only an adaption board, not having any one of the connectors connected (minus the digital AV) will result in the system saying the board has malfunctioned.
- CPU: IBM Power PC "Gekko"
- Sound DSP: Custom Macronix 16bit DSP @ 81MHz
- Main RAM: Main Memory 24 MiB MoSys 1T-SRAM, Approximately 10ns Sustainable Latency.
- Graphics Engine: "Flipper" (Custom ATI/Nintendo)
List of games
- (2002)
- (2003)
- (2003)
- (2003)
- (2004)
- (2004)
- (2004)
- (2004)
- (2005)
- (2005)
- (2006)
Distributed by Namco
- Star Fox (Unreleased)
Distributed by Bandai Namco Games
- Mario Kart Arcade GP 2 (2007)
Distributed by Sega
- F-Zero AX Monster Ride (2004)
Production credits
References
- ↑ https://sega.jp/corp/release/2002/0218/ (Wayback Machine: 2007-11-18 20:33)
- ↑ https://sega.jp/corp/release/2001/0920/ (Wayback Machine: 2011-07-17 17:45)
- ↑ https://sega.jp/corp/release/2002/0705/ (Wayback Machine: 2007-11-18 20:35)
- ↑ https://forums.sonicretro.org/index.php?threads/mario-kart-arcade-gp-2-running-on-a-wii-console.28825/#post-692907 (Wayback Machine: 2020-10-29 20:26)
- ↑ https://www.4gamer.net/games/999/G999905/20210126043/ (Wayback Machine: 2021-02-05 15:00)
Sega arcade boards |
---|
Originating in arcades |
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
Console-based hardware |
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
|
PC-based hardware |
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
|