Documentation
¶
Overview ¶
Package smtp implements the Simple Mail Transfer Protocol as defined in RFC 5321. It also implements the following extensions:
8BITMIME RFC 1652 AUTH RFC 2554 STARTTLS RFC 3207
Additional extensions may be handled by clients.
The smtp package is frozen and is not accepting new features. Some external packages provide more functionality. See:
https://godoc.org/?q=smtp
Example ¶
package main
import (
"fmt"
"log"
"net/smtp"
)
func main() {
// Connect to the remote SMTP server.
c, err := smtp.Dial("mail.example.com:25")
if err != nil {
log.Fatal(err)
}
// Set the sender and recipient first
if err := c.Mail("[email protected]"); err != nil {
log.Fatal(err)
}
if err := c.Rcpt("[email protected]"); err != nil {
log.Fatal(err)
}
// Send the email body.
wc, err := c.Data()
if err != nil {
log.Fatal(err)
}
_, err = fmt.Fprintf(wc, "This is the email body")
if err != nil {
log.Fatal(err)
}
err = wc.Close()
if err != nil {
log.Fatal(err)
}
// Send the QUIT command and close the connection.
err = c.Quit()
if err != nil {
log.Fatal(err)
}
}
Output:
Index ¶
- func SendMail(addr string, a Auth, from string, to []string, msg []byte) error
- type Auth
- type Client
- func (c *Client) Auth(a Auth) error
- func (c *Client) Close() error
- func (c *Client) Data() (io.WriteCloser, error)
- func (c *Client) Extension(ext string) (bool, string)
- func (c *Client) Hello(localName string) error
- func (c *Client) Mail(from string) error
- func (c *Client) Noop() error
- func (c *Client) Quit() error
- func (c *Client) Rcpt(to string) error
- func (c *Client) Reset() error
- func (c *Client) StartTLS(config *tls.Config) error
- func (c *Client) TLSConnectionState() (state tls.ConnectionState, ok bool)
- func (c *Client) Verify(addr string) error
- type ServerInfo
Examples ¶
Constants ¶
This section is empty.
Variables ¶
This section is empty.
Functions ¶
func SendMail ¶
SendMail connects to the server at addr, switches to TLS if possible, authenticates with the optional mechanism a if possible, and then sends an email from address from, to addresses to, with message msg. The addr must include a port, as in "mail.example.com:smtp".
The addresses in the to parameter are the SMTP RCPT addresses.
The msg parameter should be an RFC 822-style email with headers first, a blank line, and then the message body. The lines of msg should be CRLF terminated. The msg headers should usually include fields such as "From", "To", "Subject", and "Cc". Sending "Bcc" messages is accomplished by including an email address in the to parameter but not including it in the msg headers.
The SendMail function and the net/smtp package are low-level mechanisms and provide no support for DKIM signing, MIME attachments (see the mime/multipart package), or other mail functionality. Higher-level packages exist outside of the standard library.
Example ¶
package main
import (
"log"
"net/smtp"
)
func main() {
// Set up authentication information.
auth := smtp.PlainAuth("", "[email protected]", "password", "mail.example.com")
// Connect to the server, authenticate, set the sender and recipient,
// and send the email all in one step.
to := []string{"[email protected]"}
msg := []byte("To: [email protected]\r\n" +
"Subject: discount Gophers!\r\n" +
"\r\n" +
"This is the email body.\r\n")
err := smtp.SendMail("mail.example.com:25", auth, "[email protected]", to, msg)
if err != nil {
log.Fatal(err)
}
}
Output:
Types ¶
type Auth ¶
type Auth interface {
// Start begins an authentication with a server.
// It returns the name of the authentication protocol
// and optionally data to include in the initial AUTH message
// sent to the server.
// If it returns a non-nil error, the SMTP client aborts
// the authentication attempt and closes the connection.
Start(server *ServerInfo) (proto string, toServer []byte, err error)
// Next continues the authentication. The server has just sent
// the fromServer data. If more is true, the server expects a
// response, which Next should return as toServer; otherwise
// Next should return toServer == nil.
// If Next returns a non-nil error, the SMTP client aborts
// the authentication attempt and closes the connection.
Next(fromServer []byte, more bool) (toServer []byte, err error)
}
Auth is implemented by an SMTP authentication mechanism.
func CRAMMD5Auth ¶
CRAMMD5Auth returns an Auth that implements the CRAM-MD5 authentication mechanism as defined in RFC 2195. The returned Auth uses the given username and secret to authenticate to the server using the challenge-response mechanism.
func PlainAuth ¶
PlainAuth returns an Auth that implements the PLAIN authentication mechanism as defined in RFC 4616. The returned Auth uses the given username and password to authenticate to host and act as identity. Usually identity should be the empty string, to act as username.
PlainAuth will only send the credentials if the connection is using TLS or is connected to localhost. Otherwise authentication will fail with an error, without sending the credentials.
Example ¶
package main import ( "log" "net/smtp" ) // variables to make ExamplePlainAuth compile, without adding // unnecessary noise there. var ( from = "[email protected]" msg = []byte("dummy message") recipients = []string{"[email protected]"} ) func main() { // hostname is used by PlainAuth to validate the TLS certificate. hostname := "mail.example.com" auth := smtp.PlainAuth("", "[email protected]", "password", hostname) err := smtp.SendMail(hostname+":25", auth, from, recipients, msg) if err != nil { log.Fatal(err) } }
Output:
type Client ¶
type Client struct {
// Text is the textproto.Conn used by the Client. It is exported to allow for
// clients to add extensions.
Text *textproto.Conn
// contains filtered or unexported fields
}
A Client represents a client connection to an SMTP server.
func Dial ¶
Dial returns a new Client connected to an SMTP server at addr. The addr must include a port, as in "mail.example.com:smtp".
func NewClient ¶
NewClient returns a new Client using an existing connection and host as a server name to be used when authenticating.
func (*Client) Auth ¶
Auth authenticates a client using the provided authentication mechanism. A failed authentication closes the connection. Only servers that advertise the AUTH extension support this function.
func (*Client) Data ¶
func (c *Client) Data() (io.WriteCloser, error)
Data issues a DATA command to the server and returns a writer that can be used to write the mail headers and body. The caller should close the writer before calling any more methods on c. A call to Data must be preceded by one or more calls to Client.Rcpt.
func (*Client) Extension ¶
Extension reports whether an extension is support by the server. The extension name is case-insensitive. If the extension is supported, Extension also returns a string that contains any parameters the server specifies for the extension.
func (*Client) Hello ¶ added in go1.1
Hello sends a HELO or EHLO to the server as the given host name. Calling this method is only necessary if the client needs control over the host name used. The client will introduce itself as "localhost" automatically otherwise. If Hello is called, it must be called before any of the other methods.
func (*Client) Mail ¶
Mail issues a MAIL command to the server using the provided email address. If the server supports the 8BITMIME extension, Mail adds the BODY=8BITMIME parameter. If the server supports the SMTPUTF8 extension, Mail adds the SMTPUTF8 parameter. This initiates a mail transaction and is followed by one or more Client.Rcpt calls.
func (*Client) Noop ¶ added in go1.10
Noop sends the NOOP command to the server. It does nothing but check that the connection to the server is okay.
func (*Client) Rcpt ¶
Rcpt issues a RCPT command to the server using the provided email address. A call to Rcpt must be preceded by a call to Client.Mail and may be followed by a Client.Data call or another Rcpt call.
func (*Client) Reset ¶
Reset sends the RSET command to the server, aborting the current mail transaction.
func (*Client) StartTLS ¶
StartTLS sends the STARTTLS command and encrypts all further communication. Only servers that advertise the STARTTLS extension support this function.
func (*Client) TLSConnectionState ¶ added in go1.5
func (c *Client) TLSConnectionState() (state tls.ConnectionState, ok bool)
TLSConnectionState returns the client's TLS connection state. The return values are their zero values if Client.StartTLS did not succeed.
type ServerInfo ¶
type ServerInfo struct {
Name string // SMTP server name
TLS bool // using TLS, with valid certificate for Name
Auth []string // advertised authentication mechanisms
}
ServerInfo records information about an SMTP server.
Source Files