Software changelog

Check out what’s new, even better or just fixed in the Phoscon App and deCONZ.

deCONZ v2.29.0 beta

This beta release is the successor of v2.28.1 version.

Changes

• Support for Tuya smart knobs (TZ3000 and TS004F) #7904
• Support for FireAngel module P-LINE #7941
• Support for additional Philips Hue White & Color Ambiance lights #7936
• Support for Paulmann light 501.34 #7952
• Support for Sonoff smart water valve #7940
• Support for Sunricher/Namron 4 button AS switch 4512719 #7933
• Support for Livarno covering (_TZB000_yqjaollc) #7919
• Support for Ledvance bulb B40 DIM Z3 #7915
• Support for Ledvance bulb CLA60 RGBW Z3 #7920
• Support for Ledvance plug Compact EU T #7923
• Support for Heiman CO sensor-EM #7924
• Support for frient motion sensor 2 PET MOSZB-153 #7932
• Support for eWeLink temperature and humidity sensor SNZB-02P #7934
• Support for Xiaomi multi sensor LYWSD03MMC #7939
• Support for Bosch Radion TriTech ZB wireless motion detector RFDL-ZB-MS #7937
• Support for Third Reality smart button 3RSB22BZ #7897
• Support for Aqara ceiling light T1M CL-L02D #7895
• Support for Tuya temperature and humidity sensor (_TZ3000_bjawzodf) #7889
• Support for Neo temperature sensor NAS-TH07BH (_TZ3000_utwgoauk) #7890
• Support for Osram Lightify indoor LED stripe RGBW #7896
• Support for Aqara presence sensor FP1E #7900
• Support for further Neo smart plug NAS-WR01B (_TZ3000_xzhnra8x) #7905
• Support for Tuya temperature and humidity sensor (_TZ3210_ncw88jfq) #7908
• Even more additional special effects for Hue lights #7956
• Additional special effects for Hue lights #7922
• Add/update Develco and ubisys specific attributes in general.xml #7930
• DDF editor add file –> close menu entry #7910
• Fix missing battery status for various Tuya sensors #7951
• Fix Aqara dual relay module T2 DCM-K01 consumption values #7916

New feature for Phoscon App Automations

A virtual daylight sensor can now be used as a trigger. This differentiates between the event daytime and from dusk till dawn. This means that sunrise or sunset can now be used as a trigger event.

The detailed changelog can be found at GitHub release page v2.29.0.

deCONZ v2.28.1 stable

This stable release is the successor of v2.28.0 version.

Changes

• No further changes are listed.

The detailed changelog can be found at GitHub release page v2.28.1.

deCONZ v2.28.0 beta

This beta release is the successor of v2.27.6 version.

Changes

• Support for Aqara wall outlet H2 EU WP-P01D #7846
• Support for Sonoff water leak sensor SNZB-05P #7843
• Support for Woox water leak sensor R7050 (_TZ3000_arw23zcs) #7878
• Support for Tuya water leak sensor (_TZ3000_wuep9zng) #7886
• Support for Legrand contactor #7879
• Support for Aqara dual relay module T2 DCM-K01 #7847
• Support for Tuya radar sensor ZG-204ZM #7865
• Support for Nous 2 gang switch module B3Z (_TZ3000_aaifmpuq) #7869
• Support for Third Reality smart plug 3RSPE01044BZ #7875
• Support for Blitzwolf smart plug BW-SHP13 (_TZ3000_3ooaz3ng) #7838
• Support for Sonoff motion sensor SNZB-03P #7830
• Support for Nedis smoke sensor (_TYZB01_wqcac7lo) #7815
• Support for icasa dimmer Pro ICZB-IW21D #7828
• Support for icasa on/off switch Pro ICZB-IW21SW #7829
• Support for Adeo 16 A plug LDSENK02F #7855
• Support for Develco/frient electricity meter interface 2 EMIZB-141 #7850
• REST-API always return content-length header #7882
• Removal of legacy code for various devices #7822
• Correct Xiaomi internal model ID for Aqara T1 temperature and humidity sensor #7825
• Ubisys H1 manufacturer-specific attributes #7831
• Improve display of vendor and product keys in DDF store #7794
• Fix open Phoscon App when just entering IP address as URL
• Fix manufacturer specific cluster attributes with same ID as default attributes not being displayed/populated correctly #deconz/2
• Make DDF manufacturer name matching case insensitive #7864

The detailed changelog can be found at GitHub release page v2.28.0.

Phoscon App v1.8.57

This release is the successor of Phoscon App v1.8.56 version.

Changes

• Fix a bug for Philips Hue Dimmer Switch v2 in Switch Editor
• Fix Ikea Starkvind pairing
• Add missing translations for all supported languages
• Add Czech, Polish, Dutch and Swedish language support
• Remove beta status of Automations page

deCONZ v2.27.6 stable

This stable release is the successor of v2.27.5 version.

Changes

• Fix for user location of DDFs #7851

The detailed changelog can be found at GitHub release page v2.27.6.

deCONZ v2.27.5 beta

This beta release is the successor of v2.27.4 version.

Changes

• Fix consumption value for Innr plug SP 240 #7835
• Fix crash on macOS #7817
• Fix deCONZ UI coordinator name displayed empty ec4724
• Fix macOS OpenSSL library loading 9a404e
• Fix Osram Plug Z3 OTA update reboot cycle 523c50

Firmware

There’s a new ConBee III firmware version 0x26530900 with important fixes for device joining. See: wiki/Firmware-Changelog

The detailed changelog can be found at GitHub release page v2.27.5.

deCONZ v2.27.4 beta

This beta release is the successor of v2.27.3 version.

Changes

• Change DDF bundle file extension to .ddb to align with UI node labels #7813
• Fix Philips Hue dimmer switch configuration in Phoscon App
• Fix Philips Hue wall switch configuration of newer models in Phoscon App #7785
• Fix Ikea Starkvind not showing up in Phoscon App #7775

The detailed changelog can be found at GitHub release page v2.27.4.

deCONZ v2.27.3 beta

This beta release is the successor of v2.27.2 version.

Changes

• Support for Tuya soil sensor (_TZE204_myd45weu) #7808
• Support for Drayton Wiser radiator thermostat TRV #7801
• Support for Wiser room thermostat CCTFR6400 #7798

Miscellaneous

Work has started to support HTTPS / SSL connections, by default with self signed certificates. This should land in a few weeks for testing and also gets rid of Qt Network and Websockets modules. In contrast to the current the new implementation supports IPv4 and IPv6 on the same listening sockets. As SSL backend OpenSSL is used, with the goal to support others like WolfSSL in future.

The detailed changelog can be found at GitHub release page v2.27.3.

deCONZ v2.27.2 beta

This beta release is the successor of v2.27.1 version.

Changes

• This is a hot fix release for v2.27.x versions
• Fix loading of DDFs #7793

The detailed changelog can be found at GitHub release page v2.27.2.

deCONZ v2.27.1 beta

This beta release is the successor of v2.27.0 version.

Changes

• Support for Tuya covering switch with reverse configuration #7739
• Support for Tuya 4-gang switches (_TZ3000_a4xycprs, _TZ3000_u3nv1jwk) #7781
• Fix loading of DDFs on Linux which prevented various devices to work 224d91 #7783 #7785 #7776 #7775
• Fix Lidl smart plug HG08673 that stopped consumption from working #7779
• Support uploading zipped DDF bundles via Phoscon App as they can be downloaded from pull requests. A Zip file can contain one or multiple bundles.
• Improve bulk upload of DDF bundles and hotreload #7792

The detailed changelog can be found at GitHub release page v2.27.1.

Phoscon App v1.8.56

This release is the successor of Phoscon App v1.8.55 version.

Changes

• Bush-Jaeger 2-gang switch RB01 & RM01 fix for Switch Editor
• Aqara D1 wireless switch fix for Switch Editor
• Added device integration page for Device Description Files (DDF)
• Added dedicated icons for some Ikea switches
• Automations: fixed a bug that could occur after renaming an automation

deCONZ v2.27.0 beta

This beta release is the successor of v2.26.3 version.

Changes

deCONZ is now Open Source

Since 2012 the deCONZ core application, aka the GUI that runs the REST-API plugin was Closed Source and is now released as Open Source in the GIT repository. This is the first release build from that repository. Reach out to the repository description to read about the goals and future development path of deCONZ.

DDF Bundle Support

The second big change is the new DDF bundles feature as tech preview.

This brings:

• Faster shipping of device integrations
• Independence of deCONZ releases
• Much more robustness, since new DDFs or DDF bundles can’t break others and can be rolled back on a per device basis.
• Automatic CI builds for test versions of new DDF bundles during GitHub PRs

For example: When a new device gets supported or updated you only need to upload one DDF bundle with file extension .ddf via Phoscon App or REST-API. It is picket up right away for respective devices. No need to update or even restart deCONZ.

This release only has a rudimentary User Interface in the Phoscon App to upload new DDF bundles. This will be extended to provide more easily accessible control available already via REST-API.

There are also new Web based community projects as https://deconz-community.github.io/ddf-tools in development to tinker with and search for DDF bundles, which will play an important role soon.

For more technical under the hood details and what the fuzz is about please visit #7750.

Work in Progress: There is one notable limitation that switches which depend on button_maps.json aren’t handled fully by bundles yet, this will be resolved soon.

Note for Developers: From the workflow perspective how to edit DDFs, this still works as before by editing the usual JSON files. These are also shipped as before in the devices/ directory. Via REST-API a device can be instructed to use bundles or raw JSON files with hot-reload. The bundles themself are build by CI in PRs.

Device Support

• Support for Tapestry Presence Sensor Z1 #7657
• Support for Yagusmart Zigbee Smart Wall Light Switch 1-gang #7699
• Support for Luminea Home Control ZX-8588 soil sensor (_TZE200_9cqcpkgb) #7753
• Support for Namron touch thermostat 16A (4512752) #7731
• Support for Tuya door sensor (_TZ3000_1bwpjvlz) #7700
• Support for Moes ZM-105-M 1-gang dimmer (_TZE204_dcnsggvz) #7708
• Support for Moes ZM-105-M 1-gang dimmer Module #7715
• Support for Philips Hue White Ambiance ZB3 lights (LTA009, LTU001, 915005996501) #7694
• Support for Ikea Tradfri Driver 30W #7695
• Support for icasa AC Dimmer ICZB-IW11D #7697
• Support for Ikea Badring water leak sensor #7707
• Support for Tuya vibration sensor TS0210 #7706
• Support for Tuya 2-gang switch (_TZ3000_mtnpt6ws) #7712
• Support for Tuya Smart plug (TZ3000_TS011F) #7717
• Support for Aqara curtain driver E1 Rod Version ZNCLBL01LM #7572
• Support for Sunricher ceiling mount Microwave Occupancy Sensor SR-ZG9030A-MW #7677
• Support for Bosch Light/Shutter control II #7683
• Support for Philips Hue White Ambiance LWA028 #7690
• Support for Tuya Multi sensor TS0601 (_TZE200_zl1kmjqx) #7658
• Support for Tuya smoke sensor YG400A (_TZ3210_up3pngle) #7593
• Support for Namron open/close sensor (4512762) #7594
• Support for Aqara T1 mini switch WB-R02D #7595
• Support for Aqara switch WXKG11LM #7590
• Support for Xiaomi Mijia Switch WXKG01LM #7589
• Support for Ikea Askvader on/off switch #7592
• Support for Sonoff human presence sensor SNZB-06P #7582
• Support for Bosch Thermostat II 230V #7575
• Support for Sonoff thermostat TRVZB #7357
• Support for DDF bundles #7750
• Improvement for Moes switch MS-104BZ #7714
• Fix for Ikea Rodret group bindings/button events #7757
• Fix script paths for DDF files #7726
• Fix pairing Profalux roller shutter in legacy code #7735
• Removing erroneous temperature exposure for Aqara switch SSM-U01 #7719
• Fix state of Philips Hue lights not always updated correctly #7704
• Fix temperature reporting for Aqara Single Switch Module T1 (With Neutral) SSM-U01 #7650

The detailed changelog can be found at GitHub release page v2.27.0.

Phoscon App v1.8.55

This release is the successor of Phoscon App v1.8.0 version.

Changes

• New function to configure the All off button
• Added support for more air quality sensor values
• Fix a bug with new Philips Hue smart button and wall switch models in the Switch Editor
• Some fixes for the Automations page

deCONZ v2.26.3 stable

This stable release is the successor of v2.26.2 version.

Changes

• Based on v2.26.2-beta, now stable version (no further changes)

The detailed changelog can be found at GitHub release page v2.26.3.

deCONZ v2.26.2 beta

This beta release is the successor of v2.26.1 version.

Changes

• Support for Aqara E1 Water Leak Sensor SJCGQ13LM #7676
• Improve fonts on Windows and macOS in about and main window connection dialogs.
• Fix for ubisys S1(-R) power switch #7630
• Use bundled OpenSSL on macOS #7668
• Show correct deCONZ version in macOS app bundle details #7670

Upcoming v2.27.0-beta

The next beta release is cooking behind the curtains and contains larger refactoring on how Device Description Files (DDF) are loaded and initial beta support for DDF bundles. These are an evolution of how device integrations are currently distributed.

For example, if in a deCONZ setup running via Home Assistant add-on you want to use a freshly created device integration for some device, currently this requires waiting for a new deCONZ release. With DDF bundles this becomes independent of the deCONZ release cadence: And just one small file for the new device needs to be uploaded (via REST-API / web UI).

The idea is, that if a new device is added, or a bug is fixed for a device, users can test it right away and also revert back easily.

The detailed changelog can be found at GitHub release page v2.26.2.

deCONZ v2.26.1 beta

This beta release is the successor of v2.26.0 version.

Changes

• Support for Tuya 2-channel module (_TZ3000_nuenzetq) #7624
• Support for Tuya contact sensor (_TZ3000_zgrffiwg) #7631
• Support for Tuya 2-channel switch (_TZ3000_lmlsduws) #7612
• Support for Ledvance bulb A60 filament dimmable #7610
• Support for Osram Lightify bulb PAR16 50 TW (GU10) #7609
• Improvement for Ikea on/off switch firmware versions before 0x23079631 #7643

  Note: After the update it can take a while until the improvement is picket up, pressing the top button and waiting for ca. 1 minute should complete the process.

• Relax reporting interval of Sonfoff SNZB-02 multisensor #7616
• More detailed ZGP logging and relax Friends of Hue switch detection #7611
• GCFFlasher shipped with deCONZ updated to version v4.4.0
• Fix non stop reading of binding table for legacy devices #7638
• Fix consumption reporting for Lidl Silvercrest (_TZ3000_j1v25l17) #7621
• Fix negative value for sensitivity for Aqara/Xiaomi vibration sensor #7618
• Fix Osram Lightify Classic A60 W clear crash #7613
• Fix OSRAM Lightify Classic A60 RGBW crash #7608
• Fix for Ikea Tradfri control outlet #7604
• Fix unnecessary read requests for some Xiaomi devices #7602

New Phoscon App Automations feature (BETA)

The old sensor control is quite limited in support for various sensors. Automations are our new generic way to setup rules with sensors and other devices. Read more about it.

ConBee II Zigbee firmware

The sources for the firmware have been ported to build via GCC instead of IAR compiler in a modern environment. This allows to use better tools like static analyzers to fix bugs. And more importantly using a debugger directly with the device. It’s been a while since the last ConBee II firmware was released, a new one is scheduled to fix a few bugs and support Install Codes without hacks.

The detailed changelog can be found at GitHub release page v2.26.1.

deCONZ v2.26.0 beta

This beta release is the successor of v2.25.3 version.

Changes

• Support for Moes Thermostat BTH-002 #7585
• Fix for Ikea Vallhorn add missing bindings for light #7584
• Fix for Philips Hue white ambiance wrong state #7581
• Correct battery percentage of Danalock V3 #7580

The detailed changelog can be found at GitHub release page v2.26.0.

deCONZ v2.25.3 stable

This stable release is the successor of v2.25.2 version.

Changes

• Prevent heavy database writes during APS indications #7578
• Fix handling Hue Effects state attribute #7576

ConBee III Zigbee firmware

A new ConBee III deCONZ firmware version is currently under testing. The new version addressed joining related problems which can cause reliable operation and battery drain of some devices like Ikea.

OpenThread

We have released a first public OpenThread beta firmware for ConBee II and ConBee III. Visit https://phoscon.de/openthread/doc for a description on how to join a Thread Eve smart plug via ConBee as Border Router and Home Assistant as Matter controller.

The detailed changelog can be found at GitHub release page v2.25.3.

Phoscon App v1.8.0

This release is the successor of Phoscon App v1.7.0 version.

Changes

• New feature for creation of Automations
• Fix of login issues

deCONZ v2.25.2 beta

This beta release is the successor of v2.25.1 version.

Changes

• Support for Philips Hue Signe floor lamp (4080248P9) #7562
• Support for Tuya temperature and humidy sensor (_TZE200_locansqn) #7523
• Support for Avatto smart thermostat TRV16 and TRV06 (_TZE200_TS0601) #7537
• Support for Tuya water sensor (_TZ3000_kstbkt6a) #7549
• Support for Ikea Somrig shortcut button #7511
• Support for Philips Hue Lightstrip plus LCL006 #7521
• Support for Xiaomi temperature and humidity sensor MHO-C401N #7528
• Support for Ikea bulb E14 W opal 400lm #7527
• Support for Onesti Products doorlock EasyCodeTouch #7534
• Support for Osram Plug 01 #7522
• Support for Lidl Livarno window blinds #7325
• Support for Ikea Vallhorn motion sensor #7513
• Improvement for Avatto TRV16 and TRV06 (_TZE200_TS0601) #7537
• Improvement for Ikea Parasoll IAS Zone enrollment #7560
• Fix macOS doesn’t auto connect to ConBee if already attached before starting deCONZ
• Fix display of LQI values in deCONZ (note LQI text drawing is still slow)
• Fix regression from v2.24.1 that User Interface and Zigbee processing can become very slow with high CPU usage
• Fix battery spamming on Tuya smart button IH-663 #7509
• Fix CentraLite Motion Sensor-A detection #7565
• Fix non-functioning Aqara T1 open/close sensor #7559

The detailed changelog can be found at GitHub release page v2.25.2.

deCONZ v2.25.1 beta

This beta release is the successor of v2.25.0 version.

Changes

• Support for Ikea Ormanas led strip #7420
• Support for Zemismart 1-gang remote _TZ3000_tk3s5tyg #7487
• Support for Sonoff wireless switch NZB-01P #7483
• Support for Heiman Keyfobs HS1RC/HS1RC-M//HS1RC-E #7505
• Support for Develco / frient temperature and humidity sensor HMSZB-120 #7506
• Support for Bosch thermostat II (BTH-RM) #7504
• Support for Wolley / eWeLink SmartPlug CK-BL702-SWP-01(7020) #7488
• Support for innr smart plug SP 240 #7486
• Support for newer version of Popp smart thermostat eT093WRG #7491
• Support for Danfoss Ally radiator valve thermostat #7474
• Support for Popp smart Thermostat #7471
• Improvement for external temperature measurement for Bosch thermostat II #7467
• Improvement for Danfoss Ally and derivatives #7475
• Improve maintenance of application level source routing to figure out working source routes and discard non-working ones. Note for ConBee III this is currently disabled but will be enabled soon
• Improve detection of ConBee I, II and III device name inside Docker container
• Fix to use correct type for ubisys S1/S1-R #7468
• Fix missing deCONZ start menu entry on Linux
• Fix button handlers for dresden elektronik Scene Switch #7503
• Fix to force classic join/re-join for devices #7497
• Fix config/mode for ubisys devices S1/S2(-R)/J1(-R) #7493
• Fix WiFi scripts missing in .dep package

The detailed changelog can be found at GitHub release page v2.25.1.

deCONZ v2.25.0 beta

This beta release is the successor of v2.24.2 version.

Changes

• Support for Tuya bidirectional energy meter _TZE204_ac0fhfiq #7204
• Support for Paul Neuhaus ceiling light JZ-RGBW-Z01 #7465
• Support for Philips Hue White Ambiance E27 Edison ST64 Filament 550lm #7408
• Support for ubisys H1 thermostat #7421
• Support for MHCOZY smart relay ZG-005-RF #7310
• Support for Ikea Parasoll open/close sensor #7445
• Support for Ikea Tradfri LED bulb E14 250lm warm white clear chandelier #7337
• Support for variant of Tuya motion sensor _TZ3000_lf56vpxj #7402
• Support for variant of Tuya smart button IH-663 _TZ3000_fa9mlvja #7447
• Support for Sonoff open/close sensor DS01 #7444
• Support for variant of Sonoff temperature and humidity sensor SNZB-02P #7422
• Support for Namron multisensor S903TH-ZG #7406
• Support for Ikea Tradfri bulb GU10 CWS 345lm #7320
• Support for Woox smart smoke alarm R7049 #7404
• Support for Xiaomi temperature and humidity sensor LYWSD03MMC #7373
• Support for Tuya human presence sensor ZY-M100-24G #7403
• Support for Elko Smart ZB thermostat 16 A #7270
• Support for various Merten / Schneider dimmer and simple switch #7356
• Support for Tuya Fingerbot #7393
• Support for Bosch Smoke Alarm II #7354
• Improvement for Danfoss Ally #7460
• Improvement for dresden elektronik Scene Switch and Lighting Switch #7464
• Imporvement for further Danfoss specific resource items #6175
• Improvement of set Level for Legrand covering #7410
• Improvement for tuya_unlock of Moes smart button _TZ3000_ja5osu5g #7362
• Fix a problem for the Legrand Netatmo wireless scenes command #7466
• Fix generated scene names #7461
• Fix Lidl smart plug consumption value multiplier #7361
• Fix for Ikea Vindstyrka translate VOC index to tVOC level #7297

The detailed changelog can be found at GitHub release page v2.25.0.

deCONZ v2.24.2 stable

This stable release is the successor of v2.24.1 version.

Changes

• Fix wrong value for state/open on window covering devices #7314
• Correct battery reporting attribute for Aqara E1 open/close sensor MCCGQ14LM #7279
• Fix potential crashes during device pairing
• Fix macOS backup/restore function
• Code sign and notarize macOS version

The detailed changelog can be found at GitHub release page v2.24.2.

deCONZ v2.24.1 beta

This beta release is the successor of v2.24.0 version.

Changes

• Support for Nous E3 contact sensor (_TZ3000_v7chgqso) #7260
• Support for frient MOSZB-154 motion sensor pro #7264
• Support for Ikea Starkvind air purifier #7248
• Support for Ikea Vindstyrka air quality sensor #7246
• Support for Ikea Symfonisk sound contoller #7240
• Support for Aqara T1 temperature and humidity sensor WSDCGQ12LM #7241
• Support for Legrand / BTicino Home/Away master switch #7228
• Support for Ikea Tradfri open/close remote #7236
• Support for Ikea Tradfri on/off switch #7237
• Support for Ikea Tradfri motion sensor #7243
• Support for Ikea Tradfri wireless dimmer #7242
• Support for Ikea Tradfri signal repeater #7249
• Support for Ikea Tradfri shortcut button #7235
• Support for Ikea Tradfri remote control #7234
• Support for Ikea Symfonisk remote gen2 #7233
• Support for Ikea Styrbar remote control N2 #7232
• Support for Ikea Rodret dimmer #7230
• Support for Philips Hue secure contact sensor #7227
• Improvement for all Ikea blinds #7245
• Improvement for Philips Hue motion sensors #7247

The detailed changelog can be found at GitHub release page v2.24.1.

Phoscon App v1.7.0

Changes

• Support of thermostats

deCONZ v2.24.0 beta

This beta release is the successor of v2.23.1 version.

Changes

• Support for Tuya smart relay switch 4 channel module _TZ3000_wkr3jqmr #7211
• Support for Aqara LED strip T1 #7201
• Support for Ikea Tradfri bulbs #7213
• Support for Ikea Rodret remote control #7199
• Support for Tuya human presence sensor TS0601_TZE204_qasjif9e #7184
• Support for Rovf mini switch TMZ02L-16A-B2 #7196
• Support for further Neo smart plugs NAS-WR01B _TZ3000_waho4jtj #7195
• Support for Nue smart light relay 2 gang lxn59-2s7lX1.0 #7192
• Support for Frient smart plug SPLZB-141 #7189
• Support for Tuya 4-gang switch _TZ3000_uaa99arv #7150
• Support for Tuya temperature and humidity sensor _TZ3000_0s1izerx #7159
• Support for ubisys universal dimmer D1-R 5603 #7154
• Support for ubisys power switch S1-R 5601 #7153
• Support for Tuya 4-gang switch _TZ3000_pkeqinnt #7148
• Support for Tuya contact sensor models #7145
• Support for latest Philips Hue firmware #7206
• Improvement for Tuya air quality sensor _TZE200_dwcarsat #7146
• Fix Aqara vibration sensor sensitivity #7208
• Fix Ikea Tradfri shortcut button sent 1004 instead 2004 event #7214
• Fix Lidl smart watering timer _TZE200_htnnfasr missing open/close state #7207
• Fix battery not reported for Tuya 4-gang remote #7203
• deCONZ GUI nodes from now on show only one circle button for the endpoint and clusters list. The left circle button to query ZDP descriptors was removed. Please use the node context menu for this functionality. In upcoming release the circle button will be replaced by a better icon to represent the drop-down list.
• GCFFlasher 3.17 replaced by GCFFlasher 4.2.2 which fixes various bugs in 3.17 and works with ConBee I, II, III, RaspBee I, II and Hive.

The detailed changelog can be found at GitHub release page v2.24.0.

deCONZ v2.23.1 stable

This stable release is the successor of v2.23.0 version.

Changes

• Fix Ikea Tradfri Shortcut button sent 1004 instead 2004 event #7214
• Fix sensitivity for Lumi vibration sensor #7208
• Fix for macOS #7131

The detailed changelog can be found at GitHub release page v2.23.1.

deCONZ v2.23.0 beta

This beta release is the successor of v2.22.2 version.

Changes

• Phoscon App for desktop is synced with the version already contained in the native Android App. Most notably the device sections behind the menu button like switches, sensors, blinds and plugs are updated.
• Support for Loratape 3-gang remote _TZ3000_yw5tvzsk #7110
• Support for Owon thermostat AC201 #7133
• Update for Tuya air quality sensor _TZE200_dwcarsat #7121
• Support for Adeo Keyfob 4 buttons LDSENK09 #6990
• Support for Tuya radar sensor _TZE204_sxm7l9xa #7051
• Support for Paulmann switch 501.34 #7087
• Support for Philips Hue white ambiance lights #7092
• Update for Home2Link roller shutter H2L-ZBPH-RS #7023
• Support for iluminize roller shutter actuator 5128.10 #7046
• Support for Eva Powermeter #7034
• Support for Osram Classic B40 TW #7032
• Support for Osram Classic A60 RGBW #7030
• Support for Osram Classic A60 TW #7029
• Support for Osram CLA60 TW #7028
• Support for Osram Classic A60 W clear #7031
• Support for Lellki LED stripe TZ3000_air9m6af and _TZ3000_bppxj3sf #7052
• Support for Philips Hue Ensis black edition and Philips Hue Luster White and Color Ambiance lights #7065
• Support for Philips Hue White lights #7093
• Enable changing trigger distance of Tuya presence sensor _TZE204_sxm7l9xa #7132
• Refactor Phoscon Gateway password input #7128
• Update for Owon temperature sensor THS317-ET #7044
• Fix not recognized USB devices in Linux
• Fix missing battery resource item for Bosch thermostat II #7062
• Fix false water detection for Aquara water leak sensor SJCGQ11LM #7091
• Fix humidity values for Tuya LCD temperature and humidity sensor _TZE200_bjawzodf #7109
• Fix Bosch thermostat RBSH-TRV0-ZB-EU battery refresh interval #7116
• Fix Tuya temperature and humidity sensor SM0201 battery refresh interval #7074

The detailed changelog can be found at GitHub release page v2.23.0.

deCONZ v2.22.2 stable

This stable release is the successor of v2.22.1 version.

Changes

• Support for LiXee electric meter ZLinky #7016
• Improvement for Danalock smart lock V3 #7054

The detailed changelog can be found at GitHub release page v2.22.2.

deCONZ Rails ⋅ v2.22.1 beta

This beta release is the successor of v2.22.0 version.

Changes

• Support for Tuya Zigbee temperature and humidity sensor M0201/LH-331ZB #7022
• Support for LDS battery switch #7027
• Support for Ikea Tradfri control outlet #7018
• Support for Ikea Tradfri bulb GU10 W 400lm #6985
• Support for Ikea Tradfri bulb GU10 WS 400lm #6966
• Support for Ikea Tradfri bulb E27 WS globe opal 1055lm #6968
• Support for Ikea Tradfri bulb E27 WW 806lm #6965
• Support for Ikea Tradfri bulb E27 W opal 1000lm #6964
• Support for Ikea Tradfri bulb E27 WS opal 1000lm #6963
• Support for Ikea Tradfri bulb E14 WS opal 600 lm #6971
• Support for Ikea Tradfri bulb E14 WS candle opal 470lm #7017
• Support for Fantem multi sensor ZB003-X (_TZ3210_wuhzzfqg) #7007
• Support for Moes vibration sensor (_TZ3000_bmfw9ykl) #6753
• Support for Nedis switch ZBWS10WT #7006
• Support for Lidl Silvercrest smart plug with monitoring HG08673 #7013
• Support for Orvibo smoke detector SF21 #7009
• Support for Heiman smoke detector HS1SA #7008
• Support for Tuya thermostat TRV ( _TZE200_2ekuz3dz ) #6949
• Support for Universal Electronics keypad UEHK2AZ0 #6994
• Support for Hama smart radiator thermostat ( _TZE200_h4cgnbzg) #6859
• Support for Tuya / Teekar Zigbee light switch (_TYZB01_qeqvmvti) #6943
• Support for Konke Kit Pro multi function button IC 23777-KPKEY #6946
• Support for Tesla multi sensor TSL-SEN-TAH #6924
• Support for Tuya temperature and humidity sensor ZTH01 and ZTH02 #6986
• Support for Ikea Styrbar firmware 2.4.5. #6984
• Support for ThirdReality temperature and humidity sensor with LCD display (3RTHS24BZ) #6983
• Support for Candeo Modmote scene switch #6931
• Support for Moes smart switch MS-104BZ #6959
• Support for Legrand wakeup/sleep remote 064884 #6970
• Support for Tuya smart button (_TZ3000_ja5osu5g) #6977
• Support for various Tuya presence sensors TS0202 #6915
• Support for Tuya 2-channel switch module (_TZ3000_zmy4lslw) #6953
• Support for Moes door/window sensor (_TZ3000_decxrtwa) #6926
• Improvement for Philips Hue lights #6936
• Improvement for Moes 2-gang switch (_TZ3000_18ejxno0) #6957
• Fix and improve Phoscon Hive #6991
• Fix excessive battery polling for Heiman and Orvibo smoke sensors #7015
• Fix battery updates not contributing to sensor availability #6974

The detailed changelog can be found at GitHub release page v2.22.1.

deCONZ Sailor ⋅ v2.22.0 beta

This beta release is the successor of v2.21.2 version.

Changes

• Support for Salus pipe temperature sensor PS600 #6882
• Support for NEO smart plug NAS-WR01B #6907
• Support for various Tuya based water leak sensors TS0207 #6833
• Support for various Tuya based range extenders #6835
• Support for Qaynn smoke detector #6879
• Support for Tuya two channel switch Modul L (_TZ3000_jl7qyupf) #6874
• Support for Moes smart switch module 3-gang MS-104CZ (_TZ3000_pfc7i3kt) #6902
• Support for Tuya mini smart switch TMZ02L-16A-W (_TZ3000_v7sopte0) #6866
• Support for Blitzwolf multisensor BW-IS4 (_TYZB01_hjsgdkfl) #6781
• Support for Xiaomi Aqara smart curtain controller #6894
• Support for Tuya Avatto radiator actuator (_TZE200_bvu2wnxz) #6896
• Support for Lidl Silvercrest smart USB extension lead #6893
• Support for Tuya 3-gang switch (_TZ3000_w3c7ouru) #6728
• Support for Tuya Tongou rail switch TO-Q-SV1-ZT #6842
• Support for Sonoff smart switch ZBMINIL2 #6726
• Support for Technicolor keypad XHK1-TC #6695
• Support for innr light puck PL 110 and innr light stripe UC 110 #6854
• Support for Heiman smart plug #6853
• Support for Gledopto color lights #6851
• Support for Tuya soil sensor (_TZE200_myd45weu / TS0601) #6839
• Support for Aqara mini switch WXKG20LM #6828
• Support for HZC water leak sensor S900W-ZG #6832
• Support for Aqara contact sensor MCCGQ11LM #6846
• Support for ubisys dimmer D1 #6858
• Support for Namron panel heater #6792
• Support for Aeotec range extender Zi #6793
• Support for Develco external meter ZHEMI101 #6815
• Support for Aqara high precision motion sensor RTCGQ13LM #6847
• Support for Moes 2-gang push button switch (_TZ3000_18ejxno0 / TS0012) #6801
• Support for Luminea home control door and window contact sensor #6811
• Improvement for Tuya soil sensor #6897
• Improvement for Sinope and Ouellet thermostats to allow modification of backlight attribute #6827
• Improvement for Tuya power strip (_TZ3000_TS011F) #6865
• Improvement for Maestro thermostat SMT402AD #6877
• Improvement for Ikea air cleaner Starkvind #6850
• Fix Aqara TVOC air quality monitor #6867
• Fix Aqara roller shade driver E1 #6898
• Fix Third Reality water sensor (3RWS18BZ) battery value #6826
• Fix Aqara human presence sensor FP1 #6900
• Fix Ikea block-out roller blind Fyrtur #6895
• Fix missing occupancy sensing cluster for Aqara high precision motion sensor RTCGQ13LM #6891
• Fix device detection for Legrand cable outlet #6860
• Fix Aqara switch T1 SSM-U01 and SSM-U02 #6841
• Fix battery drain and add switch variants to Tuya 4-gang remote (_TZ3000_TS044) #6787
• Enable usage of zigbee install codes #6791
• Refactor switch selection to emit button events #6784

The detailed changelog can be found at GitHub release page v2.22.0.

deCONZ Circle ⋅ v2.21.2 stable

This stable release is the successor of v2.21.1 version.

Changes

• Fix potential crash in debug print #6837
• Fix ubisys shutter control J1 auto calibration #6813
• Fix Ikea Fyrtur state/on value #6809
• Fix Ikea Symfonisk controller support #6824

The detailed changelog can be found at GitHub release page v2.21.2.

deCONZ Tik Tak ⋅ v2.21.1 beta

This beta release is the successor of v2.21.0 version.

Changes

• Support for Ikea sound remote gen2 Symfonisk #6803
• Improvement for Adeo vibration sensor LDSENK08 #6732
• Improvement for Aubess/Tuya temperature and humidity sensors #6718
• Improvement for Xiaomi Aqara relay controller LLKZMK11LM #6760
• Fix dresden elektronik Scene Switch long press button events #6797
• Fix Tuya 2-gang remote TZ3000 and TS0042 battery drain #6782

The detailed changelog can be found at GitHub release page v2.21.1.

deCONZ Voodoo ⋅ v2.21.0 beta

This beta release is the successor of v2.20.1 version.

Changes

• Support for Lidl Parkside smart watering timer (_TZE200_htnnfasr) #6729
• Support for Ikea air quality sensor Vindstyrka #6776
• Support for Moes temperature and humidity sensor (_TZ3000_itnrsufe) #6735
• Support for Tuya photoelectric smoke detector (_TZE200_m9skfctm) #6736
• Support for Aubess presence detector (_TZE200_v6ossqfy) #6752
• Support for UseeLink powerbar SM-SO306-U (_TZ3000_cfnprab5) #6763
• Support for Tuya smart switch TMZ-02 Mini aka Tmz02L-16A-W #6764
• Support for Third Reality smart plug Gen2 #6768
• Support for Xiaomi Cube MFKZQ01LM, T1 MFKZQ11LM and T1 Pro MFKZQ12LM #5838
• Support for Tuya radiator thermostat TRV (_TZE200_hhrtiq0x) #6674
• Support for Tuya siren TS0219 #6661
• Support for Tuya smart air house keeper (_TZE200_dwcarsat) #6739
• Support for Tuya 1 Gang switch TS0041 (_TZ3000_4upl1fcj)#6740
• Support for Lonsonho 16A smart plug (_TZ3000_dksbtrzs) #6745
• Support for Heiman carbondioxide detector HS3AQ #6748
• Support for Wattle door lock SPL Smart #6754
• Support for Sengled bulb E21-N1EA #6746
• Support for Innr bulb 250 #6667
• Support for Robb Smarrt smart plug ROB_200-017-0 #6681
• Support for Loratap 4-button remote control #6720
• Support for Adeo/Lexman door and vibration sensor #6727
• Support for Bosch smart plug EU BSP-FZ2 #6689
• Support for Sonoff multi sensor SNZB-02D #6699
• Support for Ikea remote control TRADFRI E1810 #6357
• Support for Nedis motion sensor ZBSM10WT #6678
• Support for Terncy smart dial SD01 #6218
• Support for Ikea roller blind Fyrtur #6110
• Support for Aqara tunable white LED bulb (ZNLDP12LM) #6301
• Support for Ikea cellular blind Praktlysing #6391
• Support for Tuya luminance motion sensor ZG-204ZL #6458
• Support for Tuya single phase 65A Din rail smart energy meter #6465
• Support for Bosch radiator thermostat II #6565
• Improvement for Schneider connected socket outlet devices #6687
• Improvement for Sonoff multi sensor SNZB-02 #6655
• Improvement for some Sinope specific thermostats #6659
• Fix Tuya human presence detector ZY-M100 improved triggerdistance #6708
• Fix Aqara ignore invalid temperature value -100 #6723
• Fix Philips Hue motion sensor startup behaviour #6701
• Fix for GCFFlasher V3.17 superfluous SLIP command debug output

The detailed changelog can be found at GitHub release page v2.21.0.

deCONZ Desert Mountain Tribe ⋅ v2.20.1 stable

This stable release is the successor of v2.20.0 version.

Changes

• Fix too early reconnect on Windows10 triggered when dragging a window in deCONZ user interface.

The detailed changelog can be found at GitHub release page v2.20.1.

deCONZ Rummelsnuff ⋅ v2.20.0 beta

This beta release is the successor of v2.19.3 version.

Changes

• Support for all current NEO smart plugs with metering (TS011F) #6474
• Support for Tuya door sensor ZG-102Z (_TZE200_pay2byax) #6606
• Support for some Tuya devices #6244
• Support for Tuya human presence sensor ZY-M100 #6621
• Support for Tuya 3gang switch TS0043 (_TZ3000_w8jwkczz) #6526
• Support for Aqara smart radiator thermostat E1 #6547
• Support for Tuya 2gang switch (_TZ3000_5e235jpa) #6633
• Support for Sinope thermostat OTH4000-ZB #6431
• Support for frient plug #6651
• Support for Tuya motion sensor TS0202 (_TZ3040_6ygjfyll) #6507
• Support for Sengled door and window sensor E1D-G73 #6496
• Support for Lidl Silvercrest Gartenspieß mit 2 Steckdosen HG06620 #6531
• Support for GE in-wall smart switch 45856 #6477
• Support for Xiaomi Aqara E1 dual rocker wireless switch WXKG17LM #6626
• Support for Moes/Aubess temperature/humidity sensor with LCD (_TZ3000_ywagc4rj) #6577
• Support for LiXee Zlinky #6510
• Support for Tuya smoke sensor #6567
• Support for Nedis temperature/humidity sensor (_TZ3000_fie1dpkm) #6613
• Support for Tuya smart plug (_TZ3000_cehuw1lw) #6612
• Support for Aubess 20A smart socket (_TZ3000_hdopuwv6) #6537
• Support for Develco/frient motion sensor MOSZB-141 #6524
• Support for Danalock smart lock V3-BTZB #6638
• Support for Tuya multi sensor temperature and humidity (_TZE200_znbl8dj5, _TZE200_qoy0ekbd) #6543
• Support for Aqara light sensor T1 GZCGQ11LM #6607
• Support for Nedis 4 button remote ZBRC10WT #6575
• Support for Wiser Odace roller shutter switch S520567W #6609
• Support for Owon motion sensor PIR313-E #6573
• Support for different Nous smart plugs A1Z #6589
• Support for Blitzwolf smart socket BW-SHP15 (_TZ3000_u5u4cakc) #6587
• Support for Nexentro blinds actuator mini #6648
• Improvement for Philips Hue white and color ambiance lights #6316
• Improvement for Sinope thermostat TH11xxZB #6011
• Improvement for Sengled devices specific cluster definitions #6569
• Fix Philips Hue smart button #6564
• Fix firmware connectivity problems and reduce delays when sending commands.
• Fix for Develco IO module IOMZB-110 #6605

The detailed changelog can be found at GitHub release page v2.20.0.

deCONZ Dorano ⋅ v2.19.3 stable

This stable release is the successor of v2.19.2 version.

Changes

• Fix group membership tasks not executing #6586
• Fix renaming a device via REST-API not reflected in the deCONZ user interface.

The detailed changelog can be found at GitHub release page v2.19.3.

deCONZ Razzle Dazzle ⋅ v2.19.2 beta

This beta release is the successor of v2.19.1 version.

Changes

• Support for Aqara single switch module T1 #6503 Potential breaking change: existing integrations of this device may break if it was joined with an old ConBee/RaspBee firmware version. To fix this the device needs to be repaired. More details can be found in the linked description.
• Support for Phoscon Hive #6521
• Support for Innr smart plug SP-234 based on SP-120 #6513
• Support for Woox smart SOS button R7052 #6481
• Support for Aqara switches QBKG03LM and QBKG04LM #6488
• Support for Woox 4 buttons R7054 #6506
• Improvement to tame CPU and memory consumption experienced by some setups with recent releases.
• Fix too frequent database writes #6487
• Fix flooding the network with ZGP broadcasts #6482

The detailed changelog can be found at GitHub release page v2.19.2.

deCONZ Rawhide ⋅ v2.19.1 stable

This stable release is the successor of v2.19.0 version.

Changes

• Support for Aqara single rocker switch T1 SSM-U02 #6363
• Support for Sunricher 3-in-1 push button remote ZG2855-RGB #6425
• Support for Merten Wiser socket outlet MEG2380-0325 #6441
• Support for Heiman smart siren HS2WD-E #6400
• Support for Sonoff multi sensor SNZB-02 #6432
• Support for Schneider/Wiser battery switch WDE002924 #6373
• Support running deCONZ headless on Windows
• Fix ConBee I and RaspBee I sending commands delay #6445
• Fix Sinope in-wall outlet SP2610ZB current calculation #6442
• Fix Zemismart led strip controller 3A12S-15 #6433

The detailed changelog can be found at GitHub release page v2.19.1.

deCONZ Gonzales ⋅ v2.19.0 beta

This beta release is the successor of v2.18.2 version.

Changes

• Support for EasyAccess EasyFingerTouch doorlock #6334
• Support for Philips h2l-zbph-rs cover controller #6404
• Support for Zemismart 3A12S-15 led strip controller #6395
• Support for Sunricher SR-ZG9080A cover controller #6405
• Support for Tuya 1 gang wired Moes ZTS-EUB - 1 #6366
• Support for Aubess Multi Sensor TS0201 _TZ3000_bguser2 #6394
• Support for MOES thermostatic radiator valve (_TZE200_cpmgn2cf) #6337
• Improve performance of request handling and group casts.
• Improve performance and memory footprint of serial communication.
• Fix OTA handling and looping for newer devices from Ikea, Ledvance and others #44
• Fix Maestro thermostat SMT402AD support #6413
• Fix Develco/friend ZHEMI101 consumption scaling #6402
• Fix delays in rules processing and event propagation #6398
• Mark devices as not reachable after repeated errors #6387
• Fix Trådfri shortcut button double press #6384
• Fix Hue smart button no longer updated #6348
• Fix Bosch sensor pairing #6421

The detailed changelog can be found at GitHub release page v2.19.0-beta.

deCONZ Bukahara ⋅ v2.18.2 stable

This stable release is the successor of v2.18.1-beta version.

Changes

• Support for frient A/S keypad KEPZB-110 #6154
• Support for Develco/frient open/close sensor WISZB-121 #6139
• Support for Blitzwolf SHP-13 variant (TS011F_TZ3000_amdymr7l) #6134
• Support for Aqara H1 switches w/o neutral WS-EUK01/WS-EUK02 #6140
• Support for IKEA Starkvind air purifier #6124
• Expose battery state for Tuya 2 gang switch (_TZ3000_t8hzpgnd) #6155
• Expose charging state for Aqara roller shade driver E1 #6159
• Fix crash on Phoscon App gateway settings page.
• Fix creating backup on Windows due missing compression utility.
• Fix deCONZ GUI coordinator endpoint list sometimes showing invalid entries.
• Fix light sensor values not shown #6152

The detailed changelog can be found at GitHub release page v2.18.2.

deCONZ Linas ⋅ v2.18.1 beta

This beta release is the successor of v2.18.0-beta version.

Changes

• Support for Lidl/SilverCrest Smart Button (_TZ3000_rco1yzb1) #6304
• Support for Tuya door sensor (_TZ3000_7d8yme6f) #6307
• Support for Tuya door sensor (_TZ3000_oxslv1c9) #6257
• Support for TRADFRI bulb GU10 WW 400lm #6310
• Support for Nous E6 temperature and humidity sensor #6306
• Support for Siglis zigfred uno and zigfred plus smart in-wall switches #6282
• Support for Woox R7048 temperature and humidity sensor #6253
• Support for GLEDOPTO Zigbee Mini Switch Modul #6197
• Support for Tuya presence sensor (_TZ3000_otvn3lne) #6297
• Support for black Namron thermostat #6298
• Support for Mijia Honeywell gas leak detector JTQJ-BF-01LM/BW and smoke detector JTYJ-GD-01LM/BW #6245
• Support for Tuya smart plug (_TZ3000_typdpbpg_smart_plug_eu) #6294
• Support for Xiaomi light sensor GZCGQ01LM with different manufacturer name #6286
• Fix ROB_200-029-0 roller shutter switch #6293
• Fix GLEDOPTO lights recall scenes with color temperature #4444
• Fix triggering rules not working in some cases #6288
• Fix old webapp not contained in Windows version.

The detailed changelog can be found at GitHub release page v2.18.1-beta.

deCONZ Roota ⋅ v2.18.0 beta

This beta release is the successor of v2.17.1 version.

Changes

• Support for Schwaiger smoke detector ZHS20 #6238
• Support for Immax Neo Keyfob 07046L #6228
• Support for Xiaomi Mijia smart plug ZNCZ04LM with newer FW version #6221
• Support for Aqara SP-EUC01 and ZNCZ12LM smart plug #6216
• Support for Zlinky_TIC #5969
• Support for Tuya smart plugs _TZ3000_gjnozsaz and _TZ3000_zloso4jk #6131
• Support for Royal Gardineer (ZX-7155-675) #6163
• Support for Zigbee Water Leak Sensor A001082 #6183
• Support for various Tuya devices #6125
• Support for Namron Zigbee 1 Channel Switch K2 Black (4512728) #6170
• Update firmware version text Mijia Light Sensor GZCGQ01LM #6217
• Update firmware version text for Xiaomi devices #6188
• Improve support of Samsung multipurpose sensor #6202
• Improve support for Aqara TVOC sensor #6162
• Fix report battery correctly for Samjin multi sensor #6130
• Fix daylight sensor configuration #6240
• Fix correct consumption for lixee device #6229
• Fix Zigbee Dual Curtain Switch _TZ3000_j1xl73iw (TS130F) #6016
• Fix requests for Develco/Frient keypad #6189
• Fix consumption reporting for Sengled E1C-NB7 #6172
• Add missing GCFFlasher executable to windows installer.
• Support Ubuntu Jammy 22.04 LTS in APT repository.

The detailed changelog can be found at GitHub release page v2.18.0-beta.

deCONZ SQÜRL ⋅ v2.17.1 stable

This stable release is the successor of v2.17.0-beta version.

Changes

• Support for frient A/S keypad KEPZB-110 #6154
• Support for Develco/frient open/close sensor WISZB-121 #6139
• Support for Blitzwolf SHP-13 variant (TS011F_TZ3000_amdymr7l) #6134
• Support for Aqara H1 switches w/o neutral WS-EUK01/WS-EUK02 #6140
• Complete support for IKEA Starkvind Air Purifier #6124
• Expose battery state for Tuya 2 gang switch (_TZ3000_t8hzpgnd) #6155
• Expose charging state for Aqara Roller Shade Driver E1 #6159
• Fix crash on Phoscon App gateway settings page.
• Fix creating backup on Windows due missing compression utility.
• Fix deCONZ GUI coordinator endpoint list sometimes showing invalid entries.
• Fix light sensor values not shown #6152

The detailed changelog can be found at GitHub release page v2.17.1.

deCONZ Yama Yama ⋅ v2.17.0 beta

This beta release is the successor of v2.16.1 version.

Changes

• Support for Sunricher C4 (VIVARES_PBC4_01 / SR-ZG2833PAC-C4) #6105
• Support for Xiaomi presence sensor lumi.sensor_motion.aq2 (RTCGQ11LM) #6038
• Support for Nous A1Z plug #5994
• Support for Legrand 067755 Wireless Scenes Command #6096
• Support for Tuya temperature and humidity sensor (_TZE200_bjawzodf) #6094
• Support for ZBMINI-L relay #6095
• Support for IKEA TREDANSEN #6079
• Support for Tuya presence sensor (_TZ3000_msl6wxk9) #6098
• Support for Stelpro Maestro SMT402AD #6117
• Support for Ikea Starkvind #6118
• Support for Homebridge Config UI X #6050
• Optimizations for Ikea Tredansen #6109
• Optimizations for Aqara FP1 presence sensor #6087
• Fix updating Hue motion sensors configuration #6091
• Fix handling sensor reachable state #6106
• Fix empty model and product fields in Phoscon App.

The detailed changelog can be found at GitHub release page v2.17.0-beta.

deCONZ Akihi ⋅ v2.16.1 stable

This stable release is the successor of v2.16.0-beta version.

Changes

• Support for Aqara P1 presence sensor RTCGQ14LM #6069
• Support for Aqara FP1 presence sensor RTCZCGQ11LM #6070
• Support for Namron Touch thermostat Zigbee 16A #6046 #6065
• Support for Tuya door sensor (_TZ3000_n2egfsli) #6046
• Support for Tuya temperature and humidity sensor (_tz3000_yd2e749y) #6046
• Support for WOOX R7060 smart garden irrigation control #6029
• Support for SMaBiT door sensor AV2010/21C #6003
• Support for Tuya 2 gang switch (_TZ3000_t8hzpgnd) #6068
• Support for Philips Hue outdoor motion sensor SML004 #6012
• Improvements for the Lidl/Silvercrest doorbell #6071 #6073
• Improvements for Danalock V3 #6057
• Improvements for Sinope thermostat TH1123ZB and TH1124ZB #6002
• Fix Philips Hue motion sensor lux value if lightlevel is 0 #6052
• Fix battery status for Aqara H1 WRS-R02 #6074
• Fix processing of parallel requests to devices.
• Improve direct child device handling in new RaspBee II and ConBee II firmware version 0x26780700 Firmware Changelog.

The detailed changelog can be found at GitHub release page v2.16.1.

deCONZ Eath ⋅ v2.16.0 beta

This beta release is the successor of v2.15.3 version.

Changes

• Fix for Orvibo CM10ZW #6013
• Fix processing rules of some devices #6021
• Fix Xiaomi multi sensors exposing invalid temperature values #6025
• Fix incoming value processing for Tuya devices #6030
• Improve detection NWK address changes and ZDP discovery.
• Show neighbor lines faster during discovery.

The detailed changelog can be found at GitHub release page v2.16.0-beta.

deCONZ Weeka ⋅ v2.15.3 stable

This stable release is the successor of v2.15.2-beta version.

Changes

• Support for ORVIBO Zigbee Dry Contact (CM10ZW) #5985
• Support for Xiaomi Mijia contact sensor (MCCGQ01LM) #5979
• Support for Sunricher TERNCY-DC01 contact sensor #5997
• Gold status for LK Wiser and Philips Hue devices #5991
• Improvement for Xiaomi sensors GZCGQ01LM, WSDCGQ01LM and WSDCGQ11LM #5990
• Improvement for the Sinope TH1124ZB #5988
• Improve pairing of devices #5983
• Fix battery icon not shown for some devices #5989

The detailed changelog can be found at GitHub release page v2.15.3.

deCONZ Temano ⋅ v2.15.2 beta

This beta release is the successor of v2.15.1-beta version.

Changes

• Support for Sinope sp2610zb smart plug #5924
• Support for Sinope TH1124ZB Thermostat #5924
• Fix various switch and sensor issues #5958
• Fix Tuya RH3040 motion sensor #5970
• Improvments for OSRAM/Centralite Motion Sensor-A #5972

The detailed changelog can be found at GitHub release page v2.15.2-beta.

deCONZ Tekkek ⋅ v2.15.1 beta

This beta release is the successor of v2.15.0-beta version.

Changes

• Support for Sunricher 2/4/8 button switches (EcoDim, SLC, Namron, ROBB) #5903
• Support for Xiaomi H1 single rocker switch (neutral wire) WS-EUK03 #5919
• Support for Xiaomi H1 dual rocker switch (neutral wire) WS-EUK04 #5893
• Support for Xiaomi temperature/humidity sensor (WSDCGQ01LM) #5914
• Support for Tuya water sensor (_TZ3000_d16y6col) #5924
• Support for THIRDREALITY motion sensor Pet Friendly 3rMS16BZ #5941
• Support new variant for Centralite Pearl 3 thermostat #5937
• Support for 4-button Tuya scene switch TS0044 (_TZ3000_wkai4ga5) #5881
• Improvements for Blitzwolf BW-SHP13 smart plug #5913
• Improvements for Blitzwolf BW-SHP15 smart plug #5945
• Improvements for Danfoss Ally thermostat #5793 #5943
• Improvements for ubisys J1 window covering controller #5894
• Improvements for Develco/frient KEPZB-110 #5907
• Extend functionality of LK FUGA Wiser switches #5878
• Fix showing negative temperatures in the Phoscon App #5884

The detailed changelog can be found at GitHub release page v2.15.1-beta.

deCONZ RakTak ⋅ v2.15.0 beta

This beta release is the successor of v2.14.1 version.

Changes

• Support for Niko connected socket outlet (170-33505/170-33605) #5813
• Support for Xiaomi Aqara temperature, humidity and pressure sensor (WSDCGQ11LM) #5812
• Support for Develco motion sensor (MOSZB-140) #5794
• Support for Develco/frient smoke detector (SMSZB-120) #5810
• Support for Develco/frient heat detector (HESZB-120) #5811
• Support for Bosch water sensor (BWA-1) #5858 #5188
• Support for LK Fuga Wiser socket outlet (LK/OUTLET/1) #5766
• Support for OWON multisensor (THS317-ET) #5777
• Support for Frient keypad (KEPZB-110) #5850
• Support for Schneider Electric / Wiser plug 16A #5845
• Support for Danfoss Ally temperature and humidity sensor #5855
• Support for Develco/frient temperature and humidity sensor (HMSZB-110) #5856
• Support for Merten cover controller (MEG5113-0300) #5873
• Support for MoesGo/Tuya smart dimmer module (_TZE200_e3oitdyu) #5869
• Support for Aqara E1 roller shade (lumi.curtain.acn002) #5851
• Support for Essentials radiator thermostat (_TZE200_jeaxp72v) #5405
• Support for Sunricher ZG2833K4_EU06 #5619
• DDF support for Tuya manufacturer specific cluster #5868
• Improve Aqara contact sensor MCCGQ14LM support #5822
• Improve pairing of devices and reading basic attributes #5789
• Improve LK FUGA Wiser 4 button switch (FLS/AIRLINK/4) #5772
• Improve support for window covering devices #5619
• Correct consumption values for innr smart plug SP120 #5814
• Securely generate network key when resetting adapters #5833
• Fix sunriseoffset/sunsetoffset for Daylight sensor #5619
• Fix detection of GIRA/JUNG switches #5880
• Fix slow group casts, the delay will only be applied when firmware reports full broadcast table.
• Improve display of neighbor links in deCONZ.

The detailed changelog can be found at GitHub release page v2.15.0-beta.

deCONZ Eleria ⋅ v2.14.1 stable

This stable release is the successor of v2.14.0 beta version.

Changes

• Support for ubisys S2-R (5602) #5760
• Support for Xiaomi ZNCZ04LM smart plug #5761 #5764
• Support for new Philips motion sensor SML003 #5758
• Fix processing of correct numeric values for some sensors #5734
• Fix showing firmware version of devices in deCONZ Node List #5756
• Fix reverse fire state on Woox smoke sensor #5730
• Fix Ikea Styrbar top/side buttons detection #5759
• Fix prevent load/store incomplete sensors resources #5757
• Fix prevent devices to poll too fast in idle mode #5762
• Fix saving auto created source routes when OTA is activated.

The detailed changelog can be found at GitHub release page v2.14.1.

deCONZ Crossfade ⋅ v2.12.6 stable

This stable release is the successor of stable version v2.11.5, and includes all changes from v2.12.x-beta releases:

Changes

v2.12.0-beta
v2.12.1-beta
v2.12.2-beta
v2.12.3-beta
v2.12.4-beta
v2.12.5-beta

Please refer to the related version to get and overview of respective changes. The detailed changelog can be found at GitHub release page v2.12.6.

New stable firmware

The following firmware versions are now marked stable:

The new versions contain important bug fixes and stability improvements. Visit the Firmware Changelog for a detailed description of the changes. The firmware can be updated with the steps described at Update deCONZ manually page.

deCONZ 2nd Tannhäuser Gate ⋅ v2.12.5 beta

This release fixes a regression from v2.12.4-beta version.

Changes

• Fix connection problems with ConBee I and ConBee II on Raspberry Pi #5197

deCONZ Tannhäuser Gate ⋅ v2.12.4 beta

This beta release is based on version v2.12.3-beta.

Changes

• Support ADEO animal compatible motion sensor #5108
• Support for Tuya dimmer _TZE200_la2c2uo9 #5160
• Initial support for Xiaomi Aqara RTCGQ13LM high precision motion sensor #5141
• Support for Legrand Netatmo 4 scenes wireless remote #5070
• Fix switch configuration for Opple/WRS-R02 #5119
• Fix robustness of Xiaomi WRS-R02 switch configuration #5136
• Fix ZGP proxy support by keeping table entries alive in proxies #5192
• Omit exposure of certain values for Aqara Single Switch Module T1 (with neutral) #5098
• New Alarm Systems REST-API and keypad support #5168 (see documentation)

The detailed changelog can be found at GitHub release page v2.12.4-beta

Firmware

The new beta ConBee II firmware version 0x2670070 got a lift to solve some tricky issues.

• Fix loopbug behaviour caused by a USB stack bug
• Improved performance
• Improved maintenance of directly connected end-devices

deCONZ core

• Raise maximum device limit from 200 to 512
• Add IAS ACE and Warning Device clusters to endpoint 1
• Improve performance of deCONZ
• Reduce CPU load

deCONZ 2nd Оtava Ё ⋅ v2.12.3 beta

This release fixes a regression from v2.12.2-beta version.

Changes

• Fix Aqara WXKG11LM 2018 remote button handling #5126

deCONZ Оtava Ё ⋅ v2.12.2 beta

This beta release is based on v2.12.1-beta version.

Changes

• Fix using correct battery values for LK Wiser sensors #5024
• Fix reverse side for Yoolax covering #5017
• Fix Develco EMIZB-132 voltage calculation #5084
• Fix pairing of Tuya 4 channel smart switch (_TZ3000_excgg5kb) #5087
• Fix support for arbitrary serial ports for –dev parameter #5006
• Initial support for LK Wiser door / window Sensor (CCT591011_AS) #5022
• Initial support for LK Wiser motion sensor (CCT595011_AS) #5023
• initial support for Immax NEO ZB3.0 door/window sensor (07045L) #5057
• initial support for Swann One motion sensor (SWO-MOS1PA) #5026
• initial support for Linkind door/window Sensor (ZS110050078) #5025
• Support reporting for Tuya sensors #4868
• Support for Terncy Smart Dial (SD-01) #5018
• Support for Aqara wireless remote switch H1 (Double Rocker WRS-R02) #5067
• Improve IAS Zone enrollment #5077

The detailed changelog can be found at GitHub release page v2.12.2-beta

Phoscon App

• Support configuration of Philips Hue wall switch modes and setup in switch editor
• Show unknown switches with a generic icon which resembles the number of buttons
• Bug fixes for API debug tool stability and reverse proxy support

deCONZ Rantanplan ⋅ v2.12.1 beta

This beta release is based on version v2.12.0-beta.

Changes

• A new REST API debug page was added in the Phoscon App under: Menu → Help → API Information.
• Support for Tuya 4gang switch (_TZ3000_xabckq1v) #5004
• Support for Immax Keyfob-ZB3.0 #4952
• Support for for Sunricher switch (ROB_200-008) #5000
• Initial support for LK Wiser Temperature and Humidity Sensor (CCT593011_AS) #4954
• Initial support for Sinope Smart in-wall outlet (SP2610ZB) #4889
• Initial support for LK Wiser Water Leak Sensor (CCT592011_AS) #4955
• Add missing button handling for LIDL doorbell #4999
• Fix loading backup on Webkit browsers #4965
• Fix IAS ACE arm commands for Keyfobs #4946
• Fix KNYCKLAN receiver doesn’t turn off #4978
• Fix missing temperature and setpoint value return for Tuya/Hama TRV #4980
• Fix dresden elektronik Lighting Switch dim up button handler #5011
• Fix TRÅDFRI remote control on/off button handling #4951
• Fix TRÅDFRI remote control arrow buttons hold and long release handling #5012
• Fix Samjin Button ghost events #4986
• Increase maximum length of rule name to 64 #5005
• Improve support for Develco motion sensors #4950
• Improve LIDL Livarno Lux remote handling #5005

The detailed changelog can be found at GitHub release page v2.12.1-beta

deCONZ core

• Improved UI of Node Info Panel with extra data.
• Improved reading all attributes in Cluster Info Panel.
• Fix unknown clusters showing up as FFFF.
• Fix issues with HTTP header handling wich affected reverse proxies.
• General performance and memory usage improvements.

deCONZ Intertwingled ⋅ v2.12.0 beta

This beta release is based on stable version v2.11.5.

Changes

• Support Tuya battery scene switch (_TZ3000_dfgbtub0) #4895
• Support Tuya 4-gang scene switch (_TZ3000_xabckq1v) #4908
• Setpoint offset support for Danfoss Ally #4881
• Improve backup upload handling #4916
• Don’t enumerate devices in firmware update handler periodically #4918
• Fix always loading coordinator node from database first.
• Fix possible crash when invalid Simple Descriptor is received.

The detailed changelog can be found at GitHub release page v2.12.0-beta

deCONZ core performance

Various hot path components in core were refactored to improved performance and cut down memory usage.

• Improved serial communication performance.
• Improved Cluster Info panel performance.
• Improved DeviceEnumerator performance.
• Improved node rendering performance.

deCONZ Nassau ⋅ v2.10.3 beta

This beta release is based on beta version 2.10.2.

Changes

• Hue wall switch module; LIDL Livarno Lux lights 4541
• Add missing handler for IAS ACE data indications; prevent loading of erroneous button map entries #4582
• Fix Eria adurolight remote sensor creation and button recognition 4580
• Fix regression in –dev parameter to specify serial device names #4411
• Fix sensor and switch names change after search for already existing devices 4395
• Enable polling of on/off state for Xiaomi mains powered devices #4588
• Show full version string in deCONZ about dialog and status bar

deCONZ Kyōto ⋅ v2.10.2 beta

This beta release is based on beta version 2.10.1.

Changes

• Initial support for Tuya siren #4379
• Initial support for Envilar ZGR904-S remote #4502
• Initial support for Orvibo Dry contact and ST30 sensor #4156
• Initial support for Xiaomi Aqara T1 water leak sensor SJCGQ12LM #4464
• Initial support for GamaBit GMB-HAS-WL-B01 water leak sensor #4467
• Initial support for GamaBit GMB-HAS-VB-B01 vibration sensor #4468
• Initial support for Tuya remote controller TS0215 #4210
• Harmonize sensor error handling in API #4493
• Various smaller bugfixes #4454
• Reporting changes for Develco / cluster naming #4492
• Add API config externalwindowopen for Danfoss Ally thermostat #4461

deCONZ Yukon ⋅ v2.10.1 beta

This beta release is based on beta version 2.10.0.

Changes

• Fix Electrical Measurement cluster readings (Blitzwolf BW-SHP13) #4448
• Fix crash while importing backups #4458
• Fix updating on/off state for Sonoff ZBMini switch #4016
• Initial support for Xiaomi Aqara T1 open/close sensor MCCGQ12LM #4428
• Initial support for Danfoss Icon Zigbee Module #4423
• Initial support for GamaBit GMB-HAS-WD-B01 #4215
• Initial support for Sercomm water sensor SZ-WTD02N_CAR #4425
• Initial support for Eria Adurosmart Wireless Dimming Switch #4211
• Support battery powered version of Zemismart Chain Roller Shades Driver M515EGB #4274

deCONZ Croatoan ⋅ v2.10.0 beta

This beta release is based on stable version 2.9.3.

Changes

• Add button map for Elko ESH 316 Endevender RF #4396
• Add option to enable hue-mode via command line argument #3696
• Initial support for Apex smart plug (PoP) #3958
• Initial support for Immax Keyfob (Keyfob-ZB3.0) #3996
• Initial support for Tobular Motor Zemismart ZM25TQ #4172
• Initial support for NYCE NCZ-3041-HA motion sensor #4212
• Initial support for Climax smoke detector SD-8SCZBS #4213
• Initial support for Sercomm motion sensor SZ-PIR02 #4214
• Initial support for OWON PCT502 Thermostat #4216
• Initial support for Heiman remote controller RC-EF-3.0 #4209
• Initial support for MoesHouse / Livolo Roller Blinds #4223
• Initial support for Develco Smart Cable #3956
• Support various Tuya switches #4157
• Support for Salus SPE600 smart plug #4228
• Support for LIDL/Silvercrest door bell (TS0211) #4282
• Support for Sylvania/LEDVANCE RT 5/6 RBGW #4329
• Support new version of ELKO Super TR thermostat #4368

deCONZ Schneeflöckchen ⋅ v2.9.2 beta

This beta release is based on v2.9.1 beta version.

Changes

• Fixes for Saswell radiator thermostat (SEA801-ZIGBEE TRV) #4087 #4375
• Fix Xiaomi Smart Plug initialization after deCONZ restart #4371
• Fix LIDL/Silvercrest contact sensor setup #4284
• Fix duplicated and skipped Websocket events #4272
• Fix possible crash in debug print #4217
• Fix covering direction for Tuya curtain module QS-Zigbee-C01 and _TZ3000_xzqbrqk1 (covering switch) #4089
• Add Tuya devices to product table #4354 #4358
• Enhancements for Sengled E1E-G7F #4264
• Correct handling of Xiaomi power and consumption values #4314
• Improve debug logging of button events #4314
• Support Centralite 3200-de smart plug version #4314
• Support Hue dimmer switch (2021 model, RWL022), Livarno Lux lights #4302
• Support HiHome radiator thermostat (WZB-TRVL) #4087

deCONZ Comet Amp ⋅ v2.9.1 beta

This beta release is based on 2.9.0 beta version.

Note: This release contains only bug fixes and minor enhancements. The next stable release is delayed as we’re iron out some bugs. There will be another bug fix beta release before the next stable version is published.

Changes

• Various enhancements and fixes #4041
• Fix Poll Control cluster configuration #4163
• Refactor of IAS Zone cluster handling to improve robustness #3995
• Enhancements for Danfoss Ally #4122
• Enhance support for Sinope TH1300ZB thermostat #4137
• Improvements for Samsung SmartThings devices #4131 #4186
• Fix iCasa Pulse 2, Pulse 4S and Pulse 8S switches #4160
• Minor bug fixes LIDL/Silvercrest Christmas LED stripe #4048
• Legrand wireless switch add toggle button event for new firmware #4164
• Add another model identifier for Sonoff SNZB-01 (WB-01) #3945
• Improve Legrand Shutter support #4088

deCONZ Rudolph ⋅ v2.9.0 beta

This beta release is based on 2.8.0 beta version.

Changes

• Improve LIDL/Silvercrest Christmas LED stripe brightness handling #3953
• Initial support for LIDL/Silvercrest remote #3975
• Initial support for Trådfri shortcut button #3975
• Initial support for Feibit smoke sensor SSA01ZB (FNB56-SMF06FB1.6) #3944
• Initial support for edp re:dy smart plug (ZM-SmartPlug-1.0.0) #3959
• Initial support for Develco temperature and humidity sensor HMSZB-110 #4008
• Enable light bindings for PTVO switch relay 4/8 and DIYRUZ devices #3946
• Hide old inactive coordinator nodes #2670
• Faster restore of lights after deCONZ start #2473

deCONZ Blue Splinter View ⋅ v2.8.0 beta

This beta release is based on the v2.7.1 stable version.

Changes

• IAS Zone enhancement and bug fixes #3873
• Add initial support for Orvibo Combustible Gas Sensor #3882
• Enhancements for Niko, Feibit and Lumi specific ZCL attributes #3883
• Add initial support for Keen home vent v2 #3920
• Fix ambiguous loading of button maps and button events for lumi.sensor_switch.aq2 #3918
• Fix ZGRC-KEY-009 button event 5002 #3919
• Fix display of ZCL enum and bitmap attributes;
• Show ConBee I/II serial number in device selection drop down;
• New beta feature: Application based automatic Source Routing, more information can be found in the Wiki page.

deCONZ Sonic Boomerang ⋅ v2.7.1 stable

This stable release is based on v2.7.0 beta version.

Changes

• Improvements for LIDL/Silvercrest XMAS light stripe #3789
• LIDL/Silvercrest plugs fill missing manufacturername, modelid and swversion #3838
• LIDL/Silvercrest motion (TY0202) and contact sensor (TY0203) change manufacturer to SILVERCREST #3841
• LIDL/Silvercrest motion sensor (TY0202) don’t reset presence #3842
• Reverse lift value for Tuya cover (TS130F) #3782
• Fix OTA for Legrand devices #19
• Various fixes for Danfoss/Hive, Zen, ELKO, Xiaomi and Konke devices #3784
• Fix ZGP Friends of Hue switches routing through Zigbee network #3830

deCONZ The Whistle ⋅ v2.7.0 beta

This is a beta release based on v2.6.0 beta version.

Changes

• Initial support for LIDL/Silvercrest motion sensor #3736 #3779
• Merry Christmas with LIDL/Silvercrest LED stripe #3776
• Fix Aqara Opple switches not receiving button events #3768 #3780
• Support for new version of Trust ZYCT-202 (ZLL-NonColorController) #3733
• Support Benexmart 3 gang switch variant (TS0043) #3724
• Support Saswell SEA801 new variant (_TZE200_c88teujp) #3730
• Initial support for LEDVANCE aka Sylvania BR30 and A19 #3721
• Initial support for Samsung water leak sensor (moisturev4) #3737
• Initial support for LIDL/SilverCrest contact sensor (TY0203) #3773
• Restore support for Schlage Connect Smart Deadbolt (B3468) #3677
• Allow receiving door lock operation completion #3751
• Improve end-device pairing #3769
• Fix heating setpoint changeable for all Eurotronic Spirit Zigbee thermostats #3680
• Avoid fake device creation for TUYA light #3774
• Enhancements and improvements for Sonoff, Bitron, Develco and others #3732
• Support USB device creation inside Docker when required cgroups permissions are set for the container marthoc/docker-deconz/#298

Firmware

• Fix end-device management
• Fix creation of invalid neighbor table entries on incoming commands
• Fix joining loop in deCONZ when certain invalid parameters were set
• Raised source routes table size from 32 to 64
• Routing table size is 170

This firmware update is also recommended for ZHA, zigbee2mqtt and WebThings users. In this beta version it needs to be installed manually as described in the Wiki.

deCONZ Bowmorow ⋅ v2.6.0 beta

This is a beta release based on v2.5.88 stable version.

Changes

• Tuya thermostat and switch improvements, Kwikset 914 smart lock #3457
• Legrand Bticino Living Light L4027C improvements #3549
• Swap button maps for Sunricher switches ZGRC-KEY-007 and ZGRC-KEY-009 #3652
• Improve support for Centralite pearl thermostat (3157100) #3651
• Improve Zen thermostat support to enable cooling control #3665
• Support Bitron 902010/24A siren #3435
• Initial support for Stelpro Orleans Fan (SORB) #3422
• Initial support for linkind motion sensor ZB-MotionSensor-D0003 #3434
• Initial support for Centralite 3300 contact sensor #3443
• Initial support for Aurora AONE Smart PIR sensor #3511
• Initial support for Iluminize wall switch 511.524 (ZGRC-TEUR-003) #3513
• Initial support for Tuya smoke sensor TS0205 #3557
• Initial support for Owon AC201 Thermostat #3423
• Initial support for Sengled Smart Light Switch E1E-G7F #3436
• Initial support for iHorn smoke detector LH05121 #3479
• Initial support for Develco air quality sensor AQSZB-110 #3607
• Initial support for BOSCH air quality sensor #3669

deCONZ Mamontovaya Hotfix #1 ⋅ v2.5.88 stable

This is a hotfix release for stable version v2.5.87.

Changes

• Revert colorcapabilities change, needs to be in beta v2.6.x #3642

deCONZ Mamontovaya ⋅ v2.5.87 stable

This is a stable release based on v2.5.86 beta version.

Changes

• Fix pairing of various Xiaomi, Immax, iHorn, Danfoss and Eurotronic devices #3525 #3637
• Fix Xiaomi vibration sensor not updating state #3470
• Fix Xiaomi round button remote long press event #3520
• Expose ETI Electric Smart LED Downlight T62 color temperature #3496
• Expose Eaton Halo RL56 Smart LED Downlight color temperature #3496
• Expose lights colorcapabilities as an array #3496
• Support Xiaomi Aqara B1 curtain battery state and bri_inc:0 (stop) command #3496
• Periodically poll firmware version for IKEA, OSRAM and Philips lights #3498 #3615
• Bitron 902010/32 thermostat support reporting of mode attribute #3551
• Various enhancements for Sonoff SNZB-01, Elko Super TRV, Sercomm SZ-DWS04, Namron switches and Danfoss TRV #3502
• Fix light resource creation for some devices with Ember manufacturer code #3619
• Fix updating heatpoint for newer Eurotronic Spirit thermostats #3626
• Relax IKEA lights reporting configuration #3614
• Add Poll Control cluster module #3635
• Improve coordinator endpoint maintenance to automatically add Zigbee Green Power endpoint as well as Basic, Time, OTAU, Power Configuration, Poll Control and IAS Zone clusters.
• Fix Zigbee Green Power (ZGP) proxy support introduced in last release.
• New debug log view in deCONZ GUI under Help → Debug view.
• Fix ZCL attribute reading for data type enum8 and enum16.
• Improve support for stable and dynamic device paths like /dev/ttyACMx and /dev/serial/by-id/ in deCONZ and GCFFlasher to prevent errors on USB re-enumeration.

deCONZ Hydaspes Hotfix #1 ⋅ v2.5.86 beta

This is a hotfix release for the v2.5.85 beta version.

Changes

• Fix setting temperature mode and child lock for Elko Super TR thermostat #3433
• Use reporting instead polling for Elko Super TR, Owon AC201, Stelpro Orleans Fan SORB, Centralite pearl 3157100, Bitron 902010/32 #3433
• Fix crash while polling lights #3445
• Fix Ilumra FoH dual rocker switch detection #3439
• Fix button handling for lumi.sensor_86sw switches #3431
• Fix Aqara Opple switches button release events and Ikea wireless dimmer #3428
• Disable reporting of firmware version for IKEA lights #3446
• Fix ZCL attribute set listings in deCONZ GUI Cluster Info Panel

deCONZ Hydaspes ⋅ v2.5.85 beta

Phoscon App

• New translation system, currently French, German and English translations are availble. More coming soon.
• Default device search time raised from 1 to 3 minutes.
• Motion sensor control allows presence, open/close, vibration and water sensors as triggers.
• Support Lightify Mini Switch in Switch Editor.
• More sensors are shown under Devices → Sensors.

Device support

• Support Tuya TS0041, TS0042, TS0043 switches #3398
• Support Zemismart chain roller shades driver M515EGB (TS0601) #3398
• Support Tuya / Wesmartify thermostat Essentials Premium #3398
• Support Samjin motion sensor #3408
• Support Add button maps for ZGRC-KEY-007 and ZGRC-KEY-009 #3408
• Support BOSCH motion sensor ISW-ZPR1-WP13 #3408
• Support Ilumra Friends of Hue switch #3285
• Initial support for Elko ESH 316 Endevender RF #3409
• Fix creating unwanted lights for Xiaomi vibration sensors #3364

Under the hood

• Support ZGP (Friend of Hue) switches to route through the mesh network #3418
• Allow disable permition auto off sending #3416
• Show battery icons in deCONZ GUI based on battery state #3421

deCONZ Hyper Worm ⋅ v2.5.84 stable

This release includes fixes and devices from previous beta version v2.5.82.

Firmware

• Fix frame counter after reboot or power-loss. This issue happened in some setups and caused the network to be not reachable for a while (mostly 5–10 minutes sometimes hours).
• Fix ConBee I and RaspBee I PANID and Zigbee channel got scrambled under rare conditions.
• Fix GLIBC issue on Raspbian.
• GCFFlasher 3.15 no longer links against a specific version libWiringPi.

The firmware is included in the deCONZ package and can be updated via Phoscon App or manually as described in the Wiki.

Device support

• Support more models of Sonoff SNZB-03 motion sensor #3300.

Under the hood

• Fix manufacturer specific ZCL attributes loading.
• Enhance logging of Websocket connection close and error events d71264

deCONZ Venus ⋅ v2.5.81 stable

This stable release contains mainly bug fixes and robustness improvements.

Firmware

To mitigate multi-hop routing issues and improve network stability the latest firmware uses source routing in parallel to normal mesh routing.

The firmware needs to be installed manually.

Device support

• Enable binding and reporting for Vimar mains powered devices #3194
• Improvements for Danfoss Ally / Hive TRV #3171
• Bug fixes and enhancements for eCozy and Aqara motion sensor #3176
• Bug fixes and enhancements for thermostats, Danfoss Ally and IAS devices #3172
• Support setting/clearing thermostat schedules #3155

Under the hood

• Optimize poll manager to consider only avaliable attributes #3207
• REST-API plugin dialog: Cleanup network entries and read binding table keyboard shortcut #3191
• Fix crash in poll nodes container #3203
• Fix crash in thermostat handling 3469ca
• Fix ConBee shown as RaspBee #3261
• Fix network permit join set after deCONZ start #3255
• Fix outgoing commands were sometimes not send.
• Fix high CPU usage when LQI button is enabled to show link quality between nodes.
• Bump lastest Hue bridge firmware version #3174
• Improved firmware update #3256
• Improved discovery service #3254
• Improved serial port handling to mitigate reboot problems.
• Improved Phoscon App support for reverse proxies.
• GCFFlasher version 3.14 verifies that new firmware is installed, up and running.
• Support adding manual source routes #3244
• New context menu for nodes in the deCONZ GUI.
• Enabled debug symbols in alpha versions to improve coredumps.

deCONZ Iko Iko ⋅ v2.5.80 beta

Device support

• Improved EcoDim switches support #3073
• Improved RGBgenie ZB-5001 support #3073
• Improved RGBgenie ZB-5121 support #3141 #2732
• Improved Sunricher ZGRC-KEY-013 and RGBGenie ZB-5001 remote controls support #3073 #3125 #2857 #1256
• Initial support for Hive MOT003 presence sensor #3073
• Initial support for Namron 4512721 switch #3073
• Initial support for Xiaomi Aqara Smart Wall Switch Single Rocker (lumi.switch.b1naus01) #3073 #3083
• Initial support for Bitron outdoor siren 902010/29 #3073 #3092
• Improved Tuya/Blitzwolf BW-IS2 door/window sensor support #3073
• Initial support for Blitzwolf BW-IS5 (TS0207) water leak sensor #3073 #3067
• Initial support for Linkind ZS23000178 one key remote control #3073 #2321
• Initial support for Sonoff SNZB-01 (WB01) #3073 #2990
• Initial support for SR-ZG2835/ROB_200-018-0 rotary switch #3073 #3085
• Improved eCozy thermostat support, detailed description in #3087 #2393
• Support Schlage Connect Smart Deadbolt B3468 #3060
• Initial support for Legrand Teleruptor #3053 #3040
• Initial support for Legrand Contactor #3053
• Initial support for Hive DWS003 door sensor #3053 #1350
• Initial support for Xiaomi WXKG02LM and WXKG03LM 2020 version 2020 switches #3053 #3066
• Initial support for Konke Kit Pro-BS temperature humidity sensor version 2 #3053 #3099
• Initial support for Profalux/Eveno roller shutter #3103 #2739
• Initial support for Hive TRV001 radiator valve 3090 #3049
• Initial support for Hive SLR1b one channel thermostat 3090
• Initial support for EcoSmart/LDS ZBT-CCTSwitch-D0001 #3119 #2340
• Initial support for Tuya wireless switch #3105
• Initial support for Tuya Smart TRV thermostatic radiator valves #3105
• Axis Gear shade battery reporting #3120 #3057

Under the hood

• Various improvements for the REST-API plugin #3087 #3073
• Added Danfoss specific thermostat attributes to general.xml #3140
• Remove the don’t close DB yet message #3144
• Improved deCONZ GUI cluster info panel.

deCONZ Howlin’ Wolf #2 ⋅ v2.5.77 stable

Under the hood

• Fix transition when switching a light off #2795
• Fix API cache updated wrongly when switching off a Hue light or when setting bri to 0 #2795
• Initial support for Quirky Tripper open close sensor made by SerComm #2801
• Re-enable setting ct for IKEA CWS light #2804

deCONZ Howlin’ Wolf ⋅ v2.5.76 beta

Firmware

• Firmware version 0x26350500 with routing fixes for ConBee I and RaspBee I.
• Firmware version 0x26580700 with routing fixes and stability improvements for ConBee II.

Under the hood

• Improve Samsung multi sensor #2769
• Changes to IKEA color temperature handling #2769
• Support PST03-A multi sensor #2766
• Initial support for Sercomm open/close sensor SZ-DWS04 #2761
• Update for LifeControl MCLH-08 environmental sensor #2761
• Initial support for RGBgenie ZB-5121 #2761
• Enhancements for RGBgenie ZB-5001 #2761
• Initial support for Centralite 3323-G contact sensor #2761
• Correction Legrand power consumption module #2706
• Support Legrand motion sensor #2706
• Support Legrand double switch #2706
• Support Legrand switch module #2706
• Improve Profalux support #2706
• Support Klik Aan Klik Uit ZTHS-100 #2668
• Initial support for Sengled PAR38 bulbs #2668
• Expose voltage and current for Xiaomi smart plug #2668
• Initial support for Tuya smart plug TS0121 #2668
• Initial support for innr SP 220 smart plug #2668
• Initial support for Heiman remote control HS1RC-M #2668
• Initial support for Immax NEO ZB3.0 smart plug 07048L #2668
• Support for Sercom siren SZ-SRN12N #2668
• Initial support for WAXMAN LeakSMART v2 #2668
• Improve window covering devices IKEA Fyrtur and Xiaomi curtain #2658
• Improve IAS WD devices (Sirens, smoke detectors, etc) #2658
• Improve IKEA SYMFONISK controller #2658
• Improve rule trigger logic #2658
• Support Tuya gas sensor #2637
• Support 4-ch Namron switch #2589
• Support Tuyatec door/window sensor RH3001 #2572
• Initial support for Samsung SmartThings Outlet 2018 #2572
• Initial support for Xiaomi Mija ZB3.0 smart plug ZNCZ04LM #2572
• Initial support for Hive motion sensor MOT003 #2572
• Initial support for Centralite contact sensor 3320-L #2572
• Fix for iHorn sensors not being created #2572
• Improved power and consumption reporting #2572
• Fix Aqara Opple switches #2561
• Support Iris contact sensor v3 #2554
• Initial support for iris motion sensor v2 #2554
• Refactor logic for setting light state #2553

deCONZ Little Walter ⋅ v2.5.75 stable

Phoscon App

• Support iCasa ICZB-KPD12, ICZB-KPD14S and ICZB-KPD18S in switch editor.

• Show Xiaomi light sensor in devices sensors page.

• Show Xiaomi WXCJKG11LM, WXCJKG12LM, WXCJKG13LM and QBKG11LM on devices switches page.

• Show Bitron 902010/23 remote control on devices switches page.

• Fix bug that gateway settings page did show an offline page.

• Fix that the gateway itself did show up in the devices lights overview.

Under the hood

• Optimize consumption polling for smart plugs 6ed215
• Support Samsung/Centralite smart outlet 4d4ce4
• Support Bitron remote #2392
• Support Hue smart button #2077
• support Sercomm / Telstra SZ-ESW01-AU smart plug eb29d8
• Improve reporting of GS SKHMP30-I1 smart plug c08051
• Support SmartThings 2014 motion sensor 1f127c
• Support innr RC 110 and for iCasa Remote #2541 241bad
• Support setting state.bri for Xiaomi Aqara curtain motor B1 #1654 dbc214
• Improve window covering code 35aad7
• Improve Aqara Opple switches support #2531
• Improve group handling of IKEA Trådfri remote control and wireless dimmer with Zigbee 3.0 firmware 46d491 #2485
• Correct power value for Samsung/Centralite smart outlet d7fbeb
• Correct RMS voltage value for Develco EMIZB-132 1ae2fe
• Improve measurement units and reporting for Sercomm / Telstra SZ-ESW01-AU smart plug cf2e18 cc198d
• Remove state.bri attribute for 3A in-wall switch fc53c0
• Remove config.battery attribute for Xiaomi smart plugs c63e9b
• Fix newer model Heiman conbustable gas sensor exposed as ZHACarbnMonoxide instead ZHAFire #627 bb1f9e
• Add sanity checks for valid RuleConditions aef786
• CLIPDaylightOffset sensor, support value referring to other sensor 7ad1e3
• Add siren support for Develco heat and water leak sensor 39ecf9
• Add binding / attribute reporting for various Heiman devices 5f60db
• Refactor handling of Hue dimmer, Hue button and Lutron Aurora switches ce4a6a
• New firmware version 0x26350500 for RaspBee I and ConBee I to improve route maintenance #1261 deCONZ_Rpi_0x26350500.bin.GCF

deCONZ Elvis ⋅ v2.5.74 stable

Phoscon App

• More sensors and switches from Climax, NYCE, Lutron, Legrand Stelbro and Heiman are shown in the respective device overview pages.
• Hide switches on the main page if they don’t have a proper internal group or any lights assigned to it. That choice was made to prevent confusion with the offline mode until a proper UI is available. The Phoscon App Switch Editor is the preferred way to configure switches.

Under the hood

• Fix deCONZ not trying to reconnect to the ConBee, ConBee II or RaspBee in certain states after loosing the connection.
• After deCONZ starts it will now wait 15 seconds before the device gets automatically connected in order to prevent reboot issues. This is a workaround which will later on be fixed in firmware of ConBee II.
• Support Legrand DIN power consumption module 25604e 0d630f
• Support Tuya/Blitzwolf TS0201 temperature/humidity sensor faa948
• Support GS SKHMP30-I1 smart plug 37cd10
• Support Develco SMRZB-332 Smart Relay DIN 826566
• Support Iris motion sensor v3 578a69
• Support Legrand wireless shutter switch edf380
• Support iHorn temperature and humidity sensor 8d30c0
• Support GE 45856 on/off switch 651343
• Support RaspBee, ConBee, ConBee II, XBee under lights resources 8c8e4b
• Improve multi endpoint ZCL value handling 0f5641
• Allow bindings for Xiaomi devices 50823d
• Fix battery reporting for Xiaomi Zigbee 3.0 light sensor b9bbac
• Fix double use of ZCL sequence numbers 33d8a8
• New firmware 0x26340500 for ConBee I and RaspBee to fix IKEA routing issue. The ConBee II firmware for the fix will be available soon. #1261

deCONZ Beetlejuice ⋅ v2.5.71 stable

Phoscon App

• Improve settings page while installing or updating Homebridge-hue
• Fix scrolling on the manage lights page with many devices #2026

Under the hood

• Fix restart after network connect when Zigbee configuration was modified #2046 #2033 048180
• Support OSRAM/LEDVANCE OTA updates without renaming files.
  Checkout the new FAQ entry: How to update OSRAM devices?
• Preserve argc and argv on each deCONZ soft restart (headless version) #2046
• Support Sinope thermostat TH1300ZB #1289
• Support Zen thermostat #1702
• Support Centralite thermostat #1601
• Support Elko thermostat #1291
• Support Friends of Hue switches commissioning button f562b2 5ee2c9
• Bump Homebridge-hue version to 0.11.42 f82336

deCONZ Noodle soup ⋅ v2.5.70 beta

Phoscon App

Samsung devices are now shown with respective icons.

Xiaomi Aqara Cube drop gesture added to Switch Editor.

• Various bug fixes for the login page and usage of new discovery service at https://phoscon.de/discover
• Fix Switch Editor scrolling in the switch selection page with many items
• Fix Switch Editor not able to create or edit rules #1931

Under the hood

• Add ZHABattery resource for IKEA FYRTUR and KADRILJ smart blinds #1827
• Add OSRAM/LEDVANCE power-on settings to ZCLDB #102 #1833
• Support Sunricher (Luzense) switches #1509
• Support Samjin/SmartThings button #993
• Support ORVIBO SF21 smoke sensor 7f9016
• Support IKEA SYMFONISK sound controller #1898
• Support IKEA signal repeater as light #1095
• Initial support for LifeControl enviroment sensor 538075
• Initial support for iCasa/Sunricher remote #1978
• Use UTC timestamps for daylight sensors sunrise and sunset attributes #1828
• Use meaningful default names for new lights based on the type 6a1356
• Prevent creation of a CLIP sensor with already existing uniqueid 8239d3
• Make config.offset range more general from [-500,500] to [INT16_MIN,INT16_MAX] 65db79
• Fix OSRAM/LEDVANCE TW lights identify as Color temperature lights #1835
• Fix check for localhost login when using local proxies f780c3
• Fix deCONZ systemd restart handling
• Bump Homebridge-hue version to 0.11.41 4a2e41
• Setup binding for client clusters for innr RC 110 #653
• Improve Zigbee network startup 7699c9
• Add ne operator for rule conditions #1874
• Ignore invalid -100°C temperature for lumi.weather #1748 #1978
• Improve support for Legrand netatmo gamme #883
• deCONZ builds on Windows are now included in the automatic build process

Known issues

The commit 7699c9 introduced a bug which can lead to a restarting loop of deCONZ. If you’re affected by this, please wait until version 2.05.71 gets released. The bug is fixed in commit 048180.

deCONZ Kniffel ⋅ v2.5.69 stable

Phoscon App

• Show ConBee II image on the login page
• Improve pairing of Xiaomi sensors and switches

Raspberry Pi 4B

• The WiringPi library needs to be updated manually which is now described in the RaspBee installation instructions:

  https://phoscon.de/raspbee/install#raspbian

• All SD-card images are now based on Raspbian Buster to support the Raspberry Pi 4B

  https://phoscon.de/raspbee/sdcard

Xiaomi Magic Cube in Switch Editor

The magic of the Cube has entered the Phoscon App Switch Editor.

All gestures, like shake and rotate, can be assigned to actions similar as it works with regular switches.

A fully configured Cube is a powerful yet easy to use remote control for adults and kids. The focus on gestures was chosen so it doesn’t matter on which side the Cube is laying.

Under the hood

• Fix LifeControl smart plug consumption value 51f16b
• Fix Trådfri open/close remote dc0d50 #1121
• Fix new Trådfri motion sensor dc0d50 #1676
• Support Python 2 and 3 for IKEA OTA download script 142fe1
• Fix window covering controller device description in ZCLDB dd7962

deCONZ Jackenteer ⋅ v2.5.67 stable

Phoscon App

• Fix toggle action in Switch Editor, where sometimes a button needed to pressed twice #1780 #1181 Note that existing key assignments needs to be updated or recreated for the fix to work.
• Fix JS exception when importing a backup while the Zigbee network isn’t connected #1757
• Fix Amazon links on the help page
• Improve Homebridge PIN handling and show versions
• Fix gateway settings undefined timezone exception
• Various WiFi related fixes

Under the hood

• REST-API support for IKEA FYRTUR/KADRILJ and the open/close remote #1121
• Support Raspbian Buster for Raspberry Pi 4
• Support Debian Buster AMD64 platform
• Fix node limit of 5 instead 200 on AARM64 platform #1588
• Fix GLEDOPTO RGB-CCT color mode handling #1526
• Smaller improvements for deCONZ bootloader handling
• Don’t spam logs with wlan0 messages
• Skip unknown ZCL attributes when processing read/report attribute response
• Improvements for group0 handling 96b1c9
• New script for IKEA OTA files via curl and jq 630ac2
• Support siren of Bitron smoke detector e3870e
• Support Develco smoke detector #1534
• Support Develco magnetic sensor #1667
• Support Develco smart plug mini #1689
• Support Develco window sensor 99be7d
• Support ORVIBO switch 95aa01
• Support ORVIBO dimmer 95aa01
• Support ORVIBO motion sensor 95aa01
• Support ORVIBO smoke sensor 0b5e05
• Support Heiman CO sensor (new model) #1563
• Support Heiman HS1HT-E temperature and humidity sensor #1611
• Support LifeControl smart plug 2980e8
• Support iCasa in-wall switch #1124
• Support Konke sensors #1607 (wip)
• Use ZCL attribute reporting for iCasa keypad battery readings f158c6
• Add simplified gesture attributes for Xiaomi Cube 1436df
• Fix Node.js and homebridge-hue installation script 713202
• Add Homebridge-hue configuration to backup