Chemistry:Thallium(I) iodide

From HandWiki
Thallium(I) iodide
Thallium(I) iodide
Names
Other names
Thallium monoiodide
Thallous iodide
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 232-199-7
UNII
Properties
TlI
Molar mass 331.287 g/mol[1]
Appearance yellow crystals[1]
Density 7.1 g/cm3[1]
Melting point 441.7 °C (827.1 °F; 714.8 K)[1]
Boiling point 824 °C (1,515 °F; 1,097 K)[1]
0.085 g/L (25 °C)[1]
Solubility insoluble in alcohol[1]
−82.2·10−6 cm3/mol[2]
Hazards
GHS pictograms GHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
GHS Signal word Danger
H300, H330, H373, H411
P260, P264, P270, P271, P273, P284, P301+310, P304+340, P310, P314, P320, P321, P330, P391, P403+233, P405, P501
Flash point Non-flammable
Related compounds
Other anions
Thallium(I) fluoride
Thallium(I) chloride
Thallium(I) bromide
Other cations
Gallium(I) iodide
Indium(I) iodide
Related compounds
Mercury(II) iodide
Lead(II) iodide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references

Thallium(I) iodide is a chemical compound with the formula TlI. It is unusual in being one of the few water-insoluble metal iodides, along with AgI, CuI, SnI2, SnI4, PbI2 and HgI2.

Chemistry

TlI can be formed in aqueous solution by metathesis of any soluble thallium salt with iodide ion. It is also formed as a by-product in thallium-promoted iodination of phenols with thallium(I) acetate.

Attempts to oxidise TlI to thallium(III) iodide fail, since oxidation produces thallium(I) triiodide, Tl+I3.

Physical properties

The room temperature form of TlI is yellow and has an orthorhombic structure [3] which can be considered to be a distorted NaCl structure. The distorted structure is believed to be caused by favourable thallium-thallium interactions, the closest Tl-Tl distance is 383 pm.[4] At 175 °C the yellow form transforms to a red CsCl form. This phase transition is accompanied by about two orders of magnitude jump in electrical conductivity. The CsI structure can be stabilized down to room temperature by doping TlI with other halides such as RbI, CsI, KI, AgI, TlBr and TlCl.[5] Thus, presence of impurities might be responsible for coexistence of the cubic and orthorhombic TlI phases at ambient conditions.[3] Under high pressure, 160 kbar, TlI becomes a metallic conductor. Nanometer-thin TlI films grown on LiF, NaCl or KBr substrates exhibit the cubic rocksalt structure.[6]

Applications

Thallium(I) iodide was initially added to mercury arc lamps to improve their performance[7] The light produced was mainly in the blue green part of the visible light spectrum least absorbed by water, so these have been used for underwater lighting.[8] In modern times, it is added to quartz and ceramic metal halide lamps that uses rare-earth halides like dysprosium, to increase their efficiency and to get the light color more close to the blackbody locus. Thallium iodide alone can be used to produces green colored metal halide lamps. Thallium(I) iodide is also used in trace amounts with NaI or CsI to produce scintillators used in radiation detectors.

Natural occurrence

Natural thallium(I) iodide was first discovered in a naturally occurring setting in 2017 as a orthorhombic polymorph called nataliyamalikite. Small grains were found embedded in mascagnite sourced from fumaroles at Avachinsky, a volcano in Russia Kamchatka Peninsula that can reach temperatures of 640 °C (1,184 °F). The geologists that discovered it speculate that further research into this mineral is likely to add to the understanding of the geochemical evolution of the planet[9][10]

Safety

Like all thallium compounds, thallium(I) iodide is highly toxic.

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Haynes, p. 4.94
  2. Haynes, p. 4.136
  3. 3.0 3.1 Lowndes, R. P.; Perry, C. H. (1973). "Molecular structure and anharmonicity in thallium iodide". The Journal of Chemical Physics 58 (1): 271–278. doi:10.1063/1.1678917. Bibcode1973JChPh..58..271L. 
  4. Mudring, Anja-Verena (2007). "Thallium Halides – New Aspects of the Stereochemical Activity of Electron Lone Pairs of Heavier Main-Group Elements". European Journal of Inorganic Chemistry 2007 (6): 882–890. doi:10.1002/ejic.200600975. 
  5. Sultana, Saima; Rafiuddin (2009). "Electrical conductivity in TlI–TiO2 composite solid electrolyte". Physica B: Condensed Matter 404 (1): 36–40. doi:10.1016/j.physb.2008.10.002. Bibcode2009PhyB..404...36S. 
  6. Schulz, L. G. (1951). "Polymorphism of cesium and thallium halides". Acta Crystallographica 4 (6): 487–489. doi:10.1107/S0365110X51001641. 
  7. Reiling, Gilbert H. (1964). "Characteristics of Mercury Vapor–Metallic Iodide Arc Lamps". Journal of the Optical Society of America 54 (4): 532. doi:10.1364/JOSA.54.000532. Bibcode1964JOSA...54..532R. 
  8. Underwater Journal and information bulletin, IPC Science and Technology Press, (1973), p 245
  9. "Nataliyamalikite: Mineral information, data and localities.". https://www.mindat.org/min-47920.html. 
  10. Anderson, Natali (July 6, 2017). "New Mineral Discovered: Nataliyamalikite". Sci News. https://www.sci-news.com/geology/new-mineral-nataliyamalikite-05017.html. Retrieved March 16, 2022. 

Cited sources

HI He
LiI BeI2 BI3 CI4 NI3 I2O4,
I2O5,
I4O9
IF,
IF3,
IF5,
IF7
Ne
NaI MgI2 AlI3 SiI4 PI3,
P2I4
S ICl,
ICl3
Ar
KI CaI2 Sc TiI4 VI3 CrI3 MnI2 FeI2 CoI2 NiI2 CuI ZnI2 Ga2I6 GeI2,
GeI4
AsI3 Se IBr Kr
RbI SrI2 YI3 ZrI4 NbI5 Mo Tc Ru Rh Pd AgI CdI2 InI3 SnI4,
SnI2
SbI3 TeI4 I Xe
CsI BaI2   HfI4 TaI5 W Re Os Ir Pt AuI Hg2I2,
HgI2
TlI PbI2 BiI3 Po AtI Rn
Fr RaI2   Rf Db Sg Bh Hs Mt Ds Rg Cn Nh Fl Mc Lv Ts Og
La Ce Pr Nd Pm SmI2 Eu Gd TbI3 Dy Ho Er Tm Yb Lu
Ac ThI4 Pa UI3,
UI4
Np Pu Am Cm Bk Cf EsI3 Fm Md No Lr