High level health status of UniFi Security Gateway devices via UniFi Controller

Connects to a Ubiquiti Controller instance to monitor high level health information on the setup including alerts and firmware updates

Manual mode

Place the unifi_status folder into your custom_components folder.

Adding custom repository to HACS

Go to the Integrations page in HACS and select the three dots in the top right corner. Select Custom repositories. Add repository url. Category - Integration. Read more on https://hacs.xyz/docs/faq/custom_repositories.

Example configuration.yaml:

# Example configuration.yaml entry
sensor:
  - platform: unifi_status
    host: unifi
    username: username
    password: password
    monitored_conditions:
      - www
      - wlan
      - alerts
      - firmware

switch:
  - platform: unifi_status
    host: unifi
    username: username
    password: password

username

(string)(Required) A user on the controller

password

(string)(Required) The password for the account

host

(string)(Optional) The hostname or IP address of your controller Default value: localhost

port

(integer)(Optional) The port of your controller's web interface - this differs deopending on version - use 443 for UDMP-unifiOS Default value: 8443

version

(string)(Optional) Can also be set to 'v4' or 'UDMP-unifiOS' Default value: v5

site_id

(string)(Optional) For multisite installations, you can specify site_id to specify which is used Default value: default

verify_ssl

(boolean or filename)(Optional) Whether to do strict validation on SSL certificates of the Unifi controller. This can be true/false or the path to a locally trusted certificate to use for verification. Default value: false

monitored_conditions

(list)(Optional) A list of the sensors to monitor Default value: If not defined all sensors are setup

The following sensors can be monitored

vpn

The status of the VPN sub-system

www

The status of the WWW sub-system Attribute data includes speedtest results

lan

The status of the LAN sub-system Attribute data includes the IP of the USG

wan

The status of the WAN sub-system Attribute data includes the WAN IP (e.g. dynamic IP as allocated by your ISP)

wlan

The status of the Wifi Access Points Attribute data includes number of guests

alerts

The number of unarchived alerts on the controller Attribute data lists the detail of each alert

firmware

The number of devices that are available for a firmware update. Attribute data lists the friendly name of the relvant devices.

Switch is used to restart the AP.

The sensor currently accesses the controller everytime an individual sensor is updated. This should be optimised to access once and then feed data to the other appropriate sensors to reduce overhead.