Skip to content
/ nix Public

My personal notes and memos about playing with NixOS on a Raspberry PI

Notifications You must be signed in to change notification settings

zupo/nix

Repository files navigation

Getting started with NixOS on Raspberry Pi 3 Model B+

This is a step-by-step guide on diving into NixOS by installing and using it on a Raspberry Pi 3 Model B+.

The official documentation on running NixOS on ARM, and more specifically, on a Raspberry Pi is quite good. But it has to cover a lot of edge cases and old revisions, plus it assumes some prior experience with NixOS. I had none. I did however have the luxury of @domenkozar hand-holding me through instructions so that I could build my first NixOS install. But not everyone has the same privilege! And for those of you, this guide tries to provide enough hand-holding so that anyone with some general Linux experience is able to follow.

To make the guide even easier to follow, it is focused only on a single board: the Raspberry Pi 3 Model B+.

The end game is a robust and future-proof Media Center running on a Raspberry Pi 3.

Assumptions

  • The development machine that you will use to work through this guide, is a MacBook or a Linux machine you know well (and you can Google Linux alternatives for MacOS apps)
  • The Raspberry Pi will use wired ethernet, and will get the IP via DHCP.
  • The Raspberry Pi is connected to an HDMI display.
  • You have a somewhat decent Internet connection.

Minimal install

First, we'll do a minimal install of NixOS on your Raspberry Pi. Adding extra software on top of the minimal install is very easy and we'll do it later.

Installing NixOs on the SD card

  1. Go to https://hydra.nixos.org/search?query=sd_image and find the line that contains nixos:release-18.09-aarch64. 18.09 is the current stable version of NixOs.
  2. Click on the nixos.sd_image.aarch64-linux part of the line to see the latest builds. Click on the most recent one that has passed successfully (green checkmark).
  3. Click on the link in the File sd-image line. Mine was nixos-sd-image-18.09beta1819.76aafbf4bf4-aarch64-linux.img and the URL was https://hydra.nixos.org/build/86448927/download/1/nixos-sd-image-18.09beta1819.76aafbf4bf4-aarch64-linux.img.
  4. Use Etcher to flash the image onto your SD Card. Please use 8GB or bigger card.

First boot

  1. Put the NixOs SD card into the Pi's SD cart slot and turn it on. If all goes well, you should be dropped into a root shell.

  2. Copy over the contents of minimal.nix into /etc/nixos/configuration.nix.

    [root@nixos:~]# curl https://raw.githubusercontent.com/zupo/nix/master/minimal.nix > /etc/nixos/configuration.nix
  3. And we're ready to build our minimal configuration.

    [root@nixos:~]# nixos-rebuild switch
    building Nix...
    building the system configuration...
    these derivations will be built:
    
    ...

    The first build takes about 10 minutes, consequent ones are faster.

  4. Reboot to see it if works.

Cleanup

At this point, your Raspberry Pi should boot into the minimal NixOS configuration defined in minimal.nix. Let's do some cleanup before we continue.

[root@nixos:~]# nix-collect-garbage -d  # remove old pre-built configuration and all of its dependencies
[root@nixos:~]# nixos-rebuild switch  # remove old boot entries
[root@nixos:~]# reboot  # to be on the safe side

Ready for features

Now that you have the base NixOS install running on your Raspberry PI you can browse .nix files in the features/ directory, copy their configuration into your /etc/nixos/configuration.nix and re-run nixos-rebuild switch.

Let's try one for practice: the home theater software Kodi.

  1. Add the following to /etc/nixos/configuration.nix:

    # Enable X11 windowing system
    services.xserver.enable = true;
    services.xserver.videoDrivers = [ "modesetting" ];
    
    # Enable Kodi
    services.xserver.desktopManager.kodi.enable = true;
    
    # Enable slim autologin
    services.xserver.displayManager.lightdm.enable = true;
    services.xserver.displayManager.lightdm.autoLogin.enable = true;
    services.xserver.displayManager.lightdm.autoLogin.user = "kodi";
    
    # Define a user account
    users.extraUsers.kodi.isNormalUser = true;
  2. Run nixos-rebuild switch and reboot when it's done.

Where to go from here?

  • Check out the fully-fledged tv.nix configuration I use on my Raspberry Pi. In there you have static IP configuration, automounting of NAS, importing from other .nix files and more.

  • I really liked the one hour, hands-on tutorial when starting out. I got the basic knowledge needed to follow the official NixOS documentation.

  • Keep the cheatsheet handy.

Thanks

  • @domenkozar for not shying away from my endless harassment on IM when I got stuck. Which was often. It truly is a testament to NixOS' design that Domen was able to debug and fix my problems from 2500 kilometers away. And that's only because all "system state" is in the configuration.nix file and not sprinkled among tens of opaque locations around the filesystem.
  • The authors of NixOS on ARM which is a treasure-trove of tips & tricks.
  • Other folks on the #nixos-aarch64 IRC channel for support and insights.

Tips & Tricks

  • Configure static IP internet:

    $ ifconfig eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 up
    $ route add default gw 192.168.1.1

TODO

About

My personal notes and memos about playing with NixOS on a Raspberry PI

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages