Rogue GSM Base Station based on YateGSM and BladeRF x40. These instructions were mostly inspired by recent blog from A. Knight: Hacking GSM: Building a Rogue Base Station to Hack Cellular Devices. Small patches and corrections have been made to support latest Ubuntu OS system with GCC 6/7 and OpenSSL 1.1, along with BladeRF x40 board.
Step 0: Enter root mode with:
$ sudo su
Step 1: Update/upgrade your fresh installation of Ubuntu. In this tutorial, I have been using Ubuntu 20.04 LTS.
$ apt update ; apt upgrade
Step 2: Add BladeRF PPA and install BladeRF tools and libbladeRF
# Ubuntu 18.04
$ add-apt-repository ppa:bladerf/bladerf
# Ubuntu 20.04.3 LTS
$ add-apt-repository ppa:nuandllc/bladerf
$ apt-get update
$ apt-get install bladerf
$ apt-get install libbladerf-dev
Step 3: Add user/group permissions for non-root user
$ addgroup yate
$ usermod -a -G yate xxxxxx-your-username-here-xxxxxx
$ apt install libusb-1.0-0-dev
Step 4: Download the custom Yate distro created by Nuand
$ wget https://github.com/toperkov/YateBTSRogueGSM/raw/main/yate-rc.tar
$ tar xvf yate-rc.tar
$ mv yate /usr/src
$ mv yate-bts /usr/src
$ mv *.rbf /usr/share/Nuand/bladeRF
$ apt install autoconf gcc g++ make
Step 5: Compile Yate
Since yate fails to build with recent openssl versions, a patch has been made that supports openssl-1.1
#This patch works for openssl-1.1, and is from http:https://yate.null.ro/mantis/view.php?id=420
#cd /usr/src/yate
--- modules/openssl.cpp
+++ modules/openssl.cpp
@@ -36,6 +36,10 @@
#include <openssl/des.h>
#endif
+#if OPENSSL_VERSION_NUMBER >= 0x10100000L
+#include <openssl/modes.h>
+#endif
+
using namespace TelEngine;
namespace { // anonymous
@@ -644,6 +648,17 @@
inpData = outData;
unsigned int num = 0;
unsigned char eCountBuf[AES_BLOCK_SIZE];
+#if OPENSSL_VERSION_NUMBER >= 0x10100000L
+ CRYPTO_ctr128_encrypt(
+ (const unsigned char*)inpData,
+ (unsigned char*)outData,
+ len,
+ m_key,
+ m_initVector,
+ eCountBuf,
+ &num,
+ (block128_f)AES_encrypt);
+#else
AES_ctr128_encrypt(
(const unsigned char*)inpData,
(unsigned char*)outData,
@@ -652,6 +667,7 @@
m_initVector,
eCountBuf,
&num);
+#endif
return true;
}$ cd /usr/src/yate
$ ./autogen.sh
$ ./configure —-prefix=/usr/local
$ make
$ make install
$ ldconfig
Step 6: Compile YateBTS
In a similar fashion, some yate-bts cannot compile with gcc6, gcc7, so a patch has been made
#This patch works for gcc6, gcc7, and is from http:https://yate.null.ro/mantis/view.php?id=416
#cd /usr/src/yate-bts
--- a/mbts/GPRS/MSInfo.cpp
+++ b/mbts/GPRS/MSInfo.cpp
@@ -638,7 +638,7 @@
if (msPCHDowns.size() > 1) {
std::ostringstream os;
msDumpChannels(os);
- GPRSLOG(INFO,GPRS_MSG|GPRS_CHECK_OK) << "Multislot assignment for "<<this<<os;
+ GPRSLOG(INFO,GPRS_MSG|GPRS_CHECK_OK) << "Multislot assignment for "<<this<<(!os.fail());
}
} else {
--- a/mbts/SGSNGGSN/Sgsn.cpp
+++ b/mbts/SGSNGGSN/Sgsn.cpp
@@ -149,7 +149,7 @@
clearConn(GprsConnNone,SigConnLost);
std::ostringstream ss;
sgsnInfoDump(this,ss);
- SGSNLOGF(INFO,GPRS_OK|GPRS_MSG,"SGSN","Removing SgsnInfo:"<<ss);
+ SGSNLOGF(INFO,GPRS_OK|GPRS_MSG,"SGSN","Removing SgsnInfo:"<<(!ss.fail()));
sSgsnInfoList.remove(this);
GmmInfo *gmm = getGmm();
if (gmm && (gmm->getSI() == this)) {
@@ -252,7 +252,7 @@
{
std::ostringstream ss;
gmmInfoDump(gmm,ss,0);
- SGSNLOGF(INFO,GPRS_OK|GPRS_MSG,"SGSN","Removing gmm:"<<ss);
+ SGSNLOGF(INFO,GPRS_OK|GPRS_MSG,"SGSN","Removing gmm:"<<(!ss.fail()));
SgsnInfo *si;
RN_FOR_ALL(SgsnInfoList_t,sSgsnInfoList,si) {
// The second test here should be redundant.$ cd /usr/src/yate-bts
$ ./autogen.sh
$ ./configure —-prefix=/usr/local
$ make
$ make install
$ ldconfig
Step 7: Set permissions
$ touch /usr/local/etc/yate/snmp_data.conf /usr/local/etc/yate/tmsidata.conf
$ chown root:yate /usr/local/etc/yate/*.conf
$ chmod g+w /usr/local/etc/yate/*.conf
Step 8: Set transceiver scheduling
$ nano /usr/local/etc/yate/ybts.conf
Add the values below to the ybts.conf file
radio_read_priority=highest
radio_send_priority=high
Step 9: Install Apache2 and PHP
$ apt install apache2
$ add-apt-repository ppa:ondrej/php
$ apt update
$ apt install php5.6
Step 10: Install Network-in-a-PC
$ cd /var/www/html
$ ln -s /usr/local/share/yate/nipc_web nipc
$ chmod -R a+rw /usr/local/share/yate
$ /etc/init.d/apache2 start
Step 11: Connect to NIPC with your web browser and configure MCC, MNC, and Band for your BTS. NOTE: To determine what values to use here, select a wireless network to act as a decoy (e.g. A1 or HT). If your mobile phone is connected to the wireless network you want to imitate a BTS for, you can place your phone into field test mode. Here is the code you need to dial for an iPhone and Android:
1. Push the call button to make a phone call
2. Dial *3001#12345#*
3. Push the Call button
4. Push Serving Cell Info
Step 12: Plug in the BladeRF to the USB cable and laptop and soft load the FPGA
$ bladeRF-cli -l /usr/share/Nuand/bladeRF/hostedx40-latest.rbf
Step 13: Start Yate
$ sudo yate -v
[1] https://www.brierandthorn.com/post/hacking-gsm-building-a-rogue-base-station-to-hack-cellular-devices
[2] https://www.youtube.com/watch?v=H7n9EyN5DKs
[3] https://hernan.de/blog/creating-a-cellular-testbed-with-yatebts-and-srslte/
[4] https://github.com/goodboytower/GoodBTS
[5] https://www.nuand.com/fpga_images/
[6] http:https://yate.null.ro/tarballs/
[7] http:https://yate.null.ro/mantis/view.php?id=420
[8] https://gist.github.com/qingxp9/a250697ad9486897c3cbe20834bd6d44