This is a Kubernetes controller for distributing AWS IAM role credentials to pods via secrets.
It aims to solve the same problem as other existing tools like jtblin/kube2iam and uswitch/kiam, namely distribute different AWS IAM roles to different pods within the same cluster. However, it solves the problem in a different way to work around an inherit problem with the architecture or kube2iam and similar solutions.
Kube2iam works by running an EC2 metadata service proxy on each node in order to intercept role requests made by pods using one of the AWS SDKs. Instead of forwarding the node IAM role to the pod, the proxy will make an assume role call to STS and get the role requested by the pod (via an annotation). If the assume role request is fast, everything is fine, and the pod will get the correct role. However, if the assume role request is too slow (>1s) then the AWS SDKs will timeout and try to get credentials via the next option in the chain (e.g. a file) resulting in the pod not getting the expected role or no role at all.
This is often not a problem in clusters with a stable workload, but if you have clusters with a very dynamic workload there will be a lot of cases where a pod starts before kube2iam is ready to provide the expected role. One case is when scaling up a cluster and a new pod lands on a fresh node before kube2iam, another case is when a new pod is created and starts before kube2iam got the event that the pod was created. During update of the kube2iam daemonset there will also be a short timeframe where the metadata url will be unavailable for the pods which could lead to a refresh of credentials failing.
Instead of running as a proxy on each node, this controller runs as a single instance and distributes AWS IAM credentials via secrets. This solves the race condition problem by relying on a property of Kubernetes which ensures that a secret, mounted by a pod, must exist before the pod is started. This means that the controller can even be away for a few minutes without affecting pods running in the cluster as they will still be able to mount and read the secrets. Furthermore having a single controller means there is only one caller for to the AWS API resulting in fewer calls which can prevent ratelimiting in big clusters and you don't need to give all nodes the power to assume other roles if it's not needed.
One minor trade-off with this solution is that each pod requiring AWS IAM credentials must define a secret mount rather than a single annotation.
NB This approach currently only works for some of the AWS SDKs. I'm reaching out to AWS to figure out if this is something that could be supported.
See the configuration guide for supported SDKs.
The controller continuously looks for custom AWSIAMRole
resources which
specify an AWS IAM role by name or by the full ARN. For each resource it finds,
it will generate/update corresponding secrets containing credentials for the
IAM role specified.
The secrets can be mounted by pods as a file enabling the
AWS SDKs to use the credentials.
If an AWSIAMRole
resource is deleted, the corresponding secret would be
automatically cleaned up as well.
See the configuration guide for supported SDKs.
In order to specify that a certain AWS IAM Role should be available for
applications in a namespace you need to define an AWSIAMRole
resource which
references the IAM role you want:
apiVersion: zalando.org/v1
kind: AWSIAMRole
metadata:
name: my-app-iam-role
spec:
# The roleReference allows specifying an AWS IAM role name or arn
# Possible values:
# "aws-iam-role-name"
# "arn:aws:iam::<account-id>:role/aws-iam-role-name"
roleReference: <my-iam-role-name-or-arn>
The controller will detect the resource and create a corresponding secret with
the same name containing the role credentials. To use the credentials in a pod
you simply mount the secret (called my-app-iam-role
in this example), making
the credentials available as a file for your application to read and use.
Additionally you must also define an environment variable
AWS_SHARED_CREDENTIALS_FILE=/path/to/mounted/secret
for each container. The
environment variable is used by AWS SDKs and the AWS CLI to automatically find
and use the credentials file.
See a full example in example-app.yaml.
Note: This way of specifying the role on pod specs are subject to change. It is currently moving a lot of effort on to the users defining the pod specs. A future idea is to make the controller act as an admission controller which can inject the required configuration automatically.
The controller does not take care of AWS IAM role provisioning and assumes that the user provisions AWS IAM roles manually, for instance via CloudFormation or Terraform.
Here is an example of an AWS IAM role defined via CloudFormation:
Parameters:
AssumeRoleARN:
Description: "Role ARN of the role used by kube-aws-iam-controller"
Type: String
Metadata:
StackName: "aws-iam-example"
AWSTemplateFormatVersion: "2010-09-09"
Description: "Example IAM Role"
Resources:
IAMRole:
Type: AWS::IAM::Role
Properties:
RoleName: "aws-iam-example"
Path: /
AssumeRolePolicyDocument:
Statement:
- Action: sts:AssumeRole
Effect: Allow
Principal:
AWS: !Ref "AssumeRoleARN"
Version: '2012-10-17'
Policies:
- PolicyName: "policy"
PolicyDocument:
Version: '2012-10-17'
Statement:
- Effect: Allow
Action:
- "ec2:Describe*"
Resource: "*"
The role could be created via:
# $ASSUME_ROLE_ARN is the ARN of the role used by the kube-aws-iam-controller deployment
$ aws cloudformation create-stack --stack-name aws-iam-example \
--parameters "ParameterKey=AssumeRoleARN,ParameterValue=$ASSUME_ROLE_ARN" \
--template-body=file:https://iam-role.yaml --capabilities CAPABILITY_NAMED_IAM
The important part is the AssumeRolePolicyDocument
:
AssumeRolePolicyDocument:
Statement:
- Action: sts:AssumeRole
Effect: Allow
Principal:
AWS: !Ref "AssumeRoleARN"
Version: '2012-10-17'
This allows the kube-aws-iam-controller
to assume the role and provide
credentials on behalf of the application requesting credentials via an
AWSIAMRole
resource in the cluster.
The AssumeRoleARN
is the ARN of the role which the kube-aws-iam-controller
is running with. Usually this would be the instance role of the EC2 instance
were the controller is running.
Sometimes it's desirable to let the controller assume roles with a specific
role dedicated for that task i.e. a role different from the instance role. The
controller allows specifying such a role via the
--assume-role=<controller-role>
flag providing the following setup:
+-------------+
| |
+--> | <app-role1> |
+-----------------+ +-------------------+ | | |
| | | | | +-------------+
| <instance-role> | -- assumes --> | <controller-role> | -- assumes --+
| | | | | +-------------+
+-----------------+ +-------------------+ | | |
+--> | <app-role2> |
| |
+-------------+
In this case the <instance-role>
will only be used for the initial assuming
of the <controller-role>
and all <app-role>s
are assumed by the
<controller-role>
. This makes it possible to have many different
<instance-role>s
while the <app-role>s
only have to trust the single static
<controller-role>
. If you don't specify --assume-role
then the
<instance-role>
would have to assume the <app-role>s
.
Here is an example of the AWS IAM roles defined for this set-up to work:
Metadata:
StackName: "aws-iam-assume-role-example"
AWSTemplateFormatVersion: "2010-09-09"
Description: "Example AWS IAM Assume Role"
Resources:
InstanceIAMRole:
Type: AWS::IAM::Role
Properties:
RoleName: "instance-role"
Path: /
AssumeRolePolicyDocument:
Statement:
- Action: sts:AssumeRole
Effect: Allow
Principal:
Service: ec2.amazonaws.com
Version: '2012-10-17'
Policies:
- PolicyName: "policy"
PolicyDocument:
Version: '2012-10-17'
Statement:
- Effect: Allow
Action:
- "sts:AssumeRole"
Resource: "*"
KubeAWSIAMControllerIAMRole:
Type: AWS::IAM::Role
Properties:
RoleName: "kube-aws-iam-controller"
Path: /
AssumeRolePolicyDocument:
Statement:
- Action: sts:AssumeRole
Effect: Allow
Principal:
AWS: !Sub 'arn:${AWS::Partition}:iam::${AWS::AccountId}:role/${InstanceIAMRole}'
Version: '2012-10-17'
Policies:
- PolicyName: "policy"
PolicyDocument:
Version: '2012-10-17'
Statement:
- Effect: Allow
Action:
- "sts:AssumeRole"
Resource: "*"
APPIAMRole:
Type: AWS::IAM::Role
Properties:
RoleName: "app-role"
Path: /
AssumeRolePolicyDocument:
Statement:
- Action: sts:AssumeRole
Effect: Allow
Principal:
AWS: !Sub 'arn:${AWS::Partition}:iam::${AWS::AccountId}:role/${KubeAWSIAMControllerIAMRole}'
Version: '2012-10-17'
Policies:
- PolicyName: "policy"
PolicyDocument:
Version: '2012-10-17'
Statement:
- Effect: Allow
Action:
- "ec2:Describe*"
Resource: "*"
The kube-aws-iam-controller
can be run as a deployment in the cluster.
See deployment.yaml.
Deploy it by running:
$ kubectl apply -f docs/deployment.yaml
To ensure that pods requiring AWS IAM roles doesn't go to the EC2 metadata service of the node instead of using the credentials file provided by the secret you must block the metadata service from the pod network on each node. E.g. with an iptables rule:
$ /usr/sbin/iptables \
--append PREROUTING \
--protocol tcp \
--destination 169.254.169.254 \
--dport 80 \
--in-interface cni0 \
--match tcp \
--jump DROP
Where cni0
is the interface of the pod network on the node.
Note: The controller will read all pods on startup and therefore the memory limit for the pod must be set relative to the number of pods in the cluster (i.e. vertical scaling).
If you need access to AWS from another environment e.g. GKE then the controller can be deployed with seed credentials and refresh its own credentials used for the assume role calls similar to how it refreshes all other credentials.
To create the initial seed credentials you must configure an AWS IAM role used
for the assume role calls. In this example the IAM role is created via
cloudformation, but you can do it however you like. The important part is that
the role has permissions to do sts
calls as it will be assuming other roles.
And you should also allow the role to be assumed by your own user for creating
the initial seed credentials:
$ cat role.yaml
Metadata:
StackName: kube-aws-iam-controller-role
Resources:
KubeAWSIAMControllerRole:
Type: AWS::IAM::Role
Properties:
RoleName: kube-aws-iam-controller-role
AssumeRolePolicyDocument:
Version: '2012-10-17'
Statement:
- Action: ['sts:AssumeRole']
Effect: Allow
Principal:
AWS: "<arn-of-your-user>"
Version: '2012-10-17'
Path: /
Policies:
- PolicyName: assumer-role
PolicyDocument:
Version: '2012-10-17'
Statement:
- Action:
- sts:*
Resource: "*"
Effect: Allow
# create the role via cloudformation
$ aws cloudformation create-stack --stack-name kube-aws-iam-controller-role --template-body=file:https://role.yaml --capabilities CAPABILITY_NAMED_IAM
And then you can use the script ./scripts/set_secret.sh
to generate
initial credentials and create a secret. The script requires the ARN of the
created IAM role as an argument.
$ ./scripts/set_secret.sh $IAM_ROLE_ARN
Once the secret is created you can deploy the controller using the example manifest in deployment_with_role.yaml.
The controller will use the secret you created with temporary credentials and continue to refresh the credentials automatically.
This project uses Go modules as introduced in Go 1.11 therefore you need Go >=1.11 installed in order to build. If using Go 1.11 you also need to activate Module support.
Assuming Go has been setup with module support it can be built simply by running:
export GO111MODULE=on # needed if the project is checked out in your $GOPATH.
$ make