Outback Skybox API

zackramjan 2021-08-22

Access and control Outback Skybox Hybrid Solar inverter via python API. Getting data from the skybox is suprisingly easy since it uses a simple rest interface.

In terms of current functionality, you can:

login in with the default or custom password
read most metrics
read alerts
read notices

A next step for this project would be to write or change settings. For example, force the battery to charge

the following snippet shows the basics:

    import json
    import SkyboxAPI
    # make sure you have enabled remote login in Global Settings -> System -> Remote Security -> Enable Remote Login. 
    s = SkyboxAPI.SkyboxAPI()

    # The web interface will be running on port 3000. you can check your skybox IP address on the skybox in the Global Settings -> Network
    # It will attempt to use the outback default remote access account of username = "I" and password = "skybox"
    # You can change this to a custom userename password like this:
    # loginStatus = s.login("http:https://192.168.1.142:3000","I","mypassword") 
    # this will log you into the skybox and allow you to perform further inquiries
    loginStatus = s.login("http:https://192.168.1.142:3000") 
    # optionally, we can save and print the login status 
    # loginStatus = s.login("http:https://192.168.1.142:3000") 
    # print(loginStatus)
    
    # Lets get the current status and print a few metrics
    status = s.getStatus()

    # display the status of the pv input
    # the status is a value from 0 to 6
    print(status['pv_status'])

    # for every 'metric', there is usually a corresponding 'metric_property' which describes the range of values the metric returns.
    # here we can see that 1 means "producing" and 3 means "sleeping"
    print(status['pv_status_property'])
    
    # get and print the Alerts, these are the red-marked alerts from the skybox graphical interface
    # Also note the timestamps are typically in millisecond epoch time (int), so we can convert them to python datetimes if desired
    for alert in s.getAlerts():
        print(str(alert["fileIndex"]) + " " + str(datetime.datetime.fromtimestamp(int(alert["Timestamp"])/1000))  + "\t" + alert["Message"])

    # get and print the Notifcations, these are the in the "log" section of the skybox graphical interface
    for notifcation in s.getNotifications():
        print(str(notifcation["fileIndex"]) + " " + str(datetime.datetime.fromtimestamp(int(notifcation["Timestamp"])/1000))  + "\t" + notifcation["Message"])

Sending data to influxDB for visualization in influx/grafana

See skyboxInfux.py

basically, we pull all metrics and then send them to a free cloud instance of influxDB. Your key and influx parameters are specific in the config.json ( see example). In my home setup, I have script running in a docker container (see DockerFile) and uploaded every 10seconds. We use line protocol with influx to keep things simple and straightforward

Dashboarding on influxdb

One the data is up at influx db, it can be easily viewed as a dashboard. My definition is in influxDashboard.json and looks like the following:

Skybox Available Metrics Reference

battery_absorb_time_remaining

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_absorb_time_remaining is ' + status['battery_absorb_time_remaining'])

the value of battery_absorb_time_remaining is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR_MINUTE
decimalScale: 0

battery_ah_charging_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_ah_charging_today is ' + status['battery_ah_charging_today'])

the value of battery_ah_charging_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AH
decimalScale: 2

battery_ah_discharging_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_ah_discharging_today is ' + status['battery_ah_discharging_today'])

the value of battery_ah_discharging_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AH
decimalScale: 2

battery_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_amps is ' + status['battery_amps'])

the value of battery_amps is -3.1682762504E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

battery_charge_cycle_count

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_charge_cycle_count is ' + status['battery_charge_cycle_count'])

the value of battery_charge_cycle_count is 2

Description

type: number
default: 0
decimalScale: 0

battery_charging_state

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_charging_state is ' + status['battery_charging_state'])

the value of battery_charging_state is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF
1 -> BULK
2 -> ABSORB
3 -> FLOAT
4 -> FLOAT_CC
5 -> FLOAT_CV
6 -> EQ
7 -> RESTING

battery_connected

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_connected is ' + status['battery_connected'])

the value of battery_connected is false

Description

type: boolean
default: true

battery_days_since_last_equalization

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_days_since_last_equalization is ' + status['battery_days_since_last_equalization'])

the value of battery_days_since_last_equalization is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_DAY
decimalScale: 0

battery_days_since_last_full_charge

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_days_since_last_full_charge is ' + status['battery_days_since_last_full_charge'])

the value of battery_days_since_last_full_charge is 16568

Description

type: number
default: 0
unitOfMeasure: UNIT_DAY
decimalScale: 0

battery_dc_bus_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_dc_bus_current is ' + status['battery_dc_bus_current'])

the value of battery_dc_bus_current is 4.5224554837E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

battery_dc_bus_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_dc_bus_power is ' + status['battery_dc_bus_power'])

the value of battery_dc_bus_power is 1.2690319061E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

battery_dc_bus_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_dc_bus_voltage is ' + status['battery_dc_bus_voltage'])

the value of battery_dc_bus_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLTAGE
decimalScale: 2

battery_discharge_cycle_count

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_discharge_cycle_count is ' + status['battery_discharge_cycle_count'])

the value of battery_discharge_cycle_count is 0

Description

type: number
default: 0
decimalScale: 0

battery_eq_time_remaining

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_eq_time_remaining is ' + status['battery_eq_time_remaining'])

the value of battery_eq_time_remaining is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR_MINUTE
decimalScale: 0

battery_float_time_remaining

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_float_time_remaining is ' + status['battery_float_time_remaining'])

the value of battery_float_time_remaining is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR_MINUTE
decimalScale: 0

battery_kah_charging_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_kah_charging_lifetime is ' + status['battery_kah_charging_lifetime'])

the value of battery_kah_charging_lifetime is 5.2830081433E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_KAH
decimalScale: 2

battery_kah_discharging_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_kah_discharging_lifetime is ' + status['battery_kah_discharging_lifetime'])

the value of battery_kah_discharging_lifetime is 4.5308038592E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_KAH
decimalScale: 2

battery_kwh_charging_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_kwh_charging_today is ' + status['battery_kwh_charging_today'])

the value of battery_kwh_charging_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

battery_kwh_discharge_cumulative

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_kwh_discharge_cumulative is ' + status['battery_kwh_discharge_cumulative'])

the value of battery_kwh_discharge_cumulative is 2.1133244038E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

battery_kwh_discharging_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_kwh_discharging_today is ' + status['battery_kwh_discharging_today'])

the value of battery_kwh_discharging_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

battery_measurement_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_measurement_status is ' + status['battery_measurement_status'])

the value of battery_measurement_status is 0

Description

type: number
default: 0
decimalScale: 0

battery_mwh_charging_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_mwh_charging_lifetime is ' + status['battery_mwh_charging_lifetime'])

the value of battery_mwh_charging_lifetime is 2.5160906371E-03

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

battery_mwh_discharging_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_mwh_discharging_lifetime is ' + status['battery_mwh_discharging_lifetime'])

the value of battery_mwh_discharging_lifetime is 2.1133245900E-03

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

battery_nameplate_ahrtg

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_ahrtg is ' + status['battery_nameplate_ahrtg'])

the value of battery_nameplate_ahrtg is 0

Description

type: number
default: 0
decimalScale: 0

battery_nameplate_discharte

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_discharte is ' + status['battery_nameplate_discharte'])

the value of battery_nameplate_discharte is 0

Description

type: number
default: 0
decimalScale: 0

battery_nameplate_soc_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_soc_max is ' + status['battery_nameplate_soc_max'])

the value of battery_nameplate_soc_max is 100

Description

type: number
default: 100
decimalScale: 0

battery_nameplate_soc_min

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_soc_min is ' + status['battery_nameplate_soc_min'])

the value of battery_nameplate_soc_min is 0

Description

type: number
default: 0
decimalScale: 0

battery_nameplate_wcharte_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_wcharte_max is ' + status['battery_nameplate_wcharte_max'])

the value of battery_nameplate_wcharte_max is 5750

Description

type: number
default: 5750
decimalScale: 0

battery_nameplate_wdischarte_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_wdischarte_max is ' + status['battery_nameplate_wdischarte_max'])

the value of battery_nameplate_wdischarte_max is 5000

Description

type: number
default: 5000
decimalScale: 0

battery_nameplate_whrtg

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_nameplate_whrtg is ' + status['battery_nameplate_whrtg'])

the value of battery_nameplate_whrtg is 0

Description

type: number
default: 0
decimalScale: 0

battery_remaining_runtime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_remaining_runtime is ' + status['battery_remaining_runtime'])

the value of battery_remaining_runtime is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR_MINUTE
decimalScale: 0

battery_state_of_charge

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_state_of_charge is ' + status['battery_state_of_charge'])

the value of battery_state_of_charge is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_PERCENT
decimalScale: 0

battery_state_of_charge_historical_minimum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_state_of_charge_historical_minimum is ' + status['battery_state_of_charge_historical_minimum'])

the value of battery_state_of_charge_historical_minimum is 75

Description

type: number
default: 0
unitOfMeasure: UNIT_PERCENT
decimalScale: 0

battery_state_of_health

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_state_of_health is ' + status['battery_state_of_health'])

the value of battery_state_of_health is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_PERCENT
decimalScale: 0

battery_suns_bank_state

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_suns_bank_state is ' + status['battery_suns_bank_state'])

the value of battery_suns_bank_state is 1

Description

type: string
default: 1

Possible Values (Enumeration)

1 -> DISCONNECTED
2 -> INITIALIZING
3 -> CONNECTED
4 -> STANDBY
5 -> SOC_PROTECTION
99 -> FAULT

battery_suns_charging_state

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_suns_charging_state is ' + status['battery_suns_charging_state'])

the value of battery_suns_charging_state is 1

Description

type: string
default: 1

Possible Values (Enumeration)

1 -> OFF
2 -> EMPTY
3 -> DISCHARGING
4 -> CHARGING
5 -> FULL
6 -> HOLDING
7 -> TESTING

battery_suns_type

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_suns_type is ' + status['battery_suns_type'])

the value of battery_suns_type is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> UNKNOWN
1 -> LEAD_ACID
2 -> NICKEL_METAL_HYDRATE
3 -> NICKEL_CADMIUM
4 -> LITHIUM_ION
5 -> CARBON_ZINC
6 -> ZINC_CHLORIDE
7 -> ALKALINE
8 -> RECHARGEABLE_ALKALINE
9 -> SODIUM_SULFUR
10 -> FLOW
99 -> OTHER

battery_sunspec_event_1

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_sunspec_event_1 is ' + status['battery_sunspec_event_1'])

the value of battery_sunspec_event_1 is 0

Description

type: number
default: 0
decimalScale: 0

battery_temp_comp_offset

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_temp_comp_offset is ' + status['battery_temp_comp_offset'])

the value of battery_temp_comp_offset is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLTAGE
decimalScale: 1

battery_temperature

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_temperature is ' + status['battery_temperature'])

the value of battery_temperature is 9.9900000000E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 2

battery_temperature_fet

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_temperature_fet is ' + status['battery_temperature_fet'])

the value of battery_temperature_fet is 35

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

battery_temperature_igbt

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_temperature_igbt is ' + status['battery_temperature_igbt'])

the value of battery_temperature_igbt is 29

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

battery_temperature_mcu_adc

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_temperature_mcu_adc is ' + status['battery_temperature_mcu_adc'])

the value of battery_temperature_mcu_adc is 1967

Description

type: number
default: 0
decimalScale: 0

battery_time_since_last_eq

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_time_since_last_eq is ' + status['battery_time_since_last_eq'])

the value of battery_time_since_last_eq is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_MINUTE
decimalScale: 0

battery_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_voltage is ' + status['battery_voltage'])

the value of battery_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLTAGE
decimalScale: 1

battery_voltage_historical_maximum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_voltage_historical_maximum is ' + status['battery_voltage_historical_maximum'])

the value of battery_voltage_historical_maximum is 5.9306350708E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

battery_voltage_historical_minimum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_voltage_historical_minimum is ' + status['battery_voltage_historical_minimum'])

the value of battery_voltage_historical_minimum is 4.4821647644E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

battery_voltage_temp_comp

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_voltage_temp_comp is ' + status['battery_voltage_temp_comp'])

the value of battery_voltage_temp_comp is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLTAGE
decimalScale: 1

battery_watts

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of battery_watts is ' + status['battery_watts'])

the value of battery_watts is -0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

firmware_ui_action_enable_apply_sdcard_update

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of firmware_ui_action_enable_apply_sdcard_update is ' + status['firmware_ui_action_enable_apply_sdcard_update'])

the value of firmware_ui_action_enable_apply_sdcard_update is false

Description

type: boolean
default: false

firmware_ui_action_enable_apply_usb_update

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of firmware_ui_action_enable_apply_usb_update is ' + status['firmware_ui_action_enable_apply_usb_update'])

the value of firmware_ui_action_enable_apply_usb_update is false

Description

type: boolean
default: false

firmware_ui_action_enable_download_server_update

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of firmware_ui_action_enable_download_server_update is ' + status['firmware_ui_action_enable_download_server_update'])

the value of firmware_ui_action_enable_download_server_update is false

Description

type: boolean
default: false

firmware_usb_present

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of firmware_usb_present is ' + status['firmware_usb_present'])

the value of firmware_usb_present is false

Description

type: boolean
default: false

generator_ac_current_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_ac_current_sum is ' + status['generator_ac_current_sum'])

the value of generator_ac_current_sum is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_ags_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_ags_status is ' + status['generator_ags_status'])

the value of generator_ags_status is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> DISABLED
1 -> ENABLED
2 -> EXERCISE_DEFERRED
3 -> QUIET_TIME_DEFERRED

generator_l1_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_apparent_power is ' + status['generator_l1_apparent_power'])

the value of generator_l1_apparent_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

generator_l1_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_current is ' + status['generator_l1_current'])

the value of generator_l1_current is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l1_dc_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_dc_current is ' + status['generator_l1_dc_current'])

the value of generator_l1_dc_current is -2.9999999329E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l1_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_kwh_bought_today is ' + status['generator_l1_kwh_bought_today'])

the value of generator_l1_kwh_bought_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l1_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_kwh_sold_today is ' + status['generator_l1_kwh_sold_today'])

the value of generator_l1_kwh_sold_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l1_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_mwh_bought_lifetime is ' + status['generator_l1_mwh_bought_lifetime'])

the value of generator_l1_mwh_bought_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l1_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_mwh_sold_lifetime is ' + status['generator_l1_mwh_sold_lifetime'])

the value of generator_l1_mwh_sold_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l1_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_power_factor is ' + status['generator_l1_power_factor'])

the value of generator_l1_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l1_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_voltage is ' + status['generator_l1_voltage'])

the value of generator_l1_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

generator_l1_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_voltage_variance_average is ' + status['generator_l1_voltage_variance_average'])

the value of generator_l1_voltage_variance_average is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l1_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_voltage_variance_high is ' + status['generator_l1_voltage_variance_high'])

the value of generator_l1_voltage_variance_high is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l1_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_voltage_variance_low is ' + status['generator_l1_voltage_variance_low'])

the value of generator_l1_voltage_variance_low is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l1_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l1_wattage is ' + status['generator_l1_wattage'])

the value of generator_l1_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

generator_l2_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_apparent_power is ' + status['generator_l2_apparent_power'])

the value of generator_l2_apparent_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

generator_l2_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_current is ' + status['generator_l2_current'])

the value of generator_l2_current is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l2_dc_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_dc_current is ' + status['generator_l2_dc_current'])

the value of generator_l2_dc_current is -1.9999999553E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l2_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_kwh_bought_today is ' + status['generator_l2_kwh_bought_today'])

the value of generator_l2_kwh_bought_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l2_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_kwh_sold_today is ' + status['generator_l2_kwh_sold_today'])

the value of generator_l2_kwh_sold_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l2_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_mwh_bought_lifetime is ' + status['generator_l2_mwh_bought_lifetime'])

the value of generator_l2_mwh_bought_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l2_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_mwh_sold_lifetime is ' + status['generator_l2_mwh_sold_lifetime'])

the value of generator_l2_mwh_sold_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l2_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_power_factor is ' + status['generator_l2_power_factor'])

the value of generator_l2_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l2_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_voltage is ' + status['generator_l2_voltage'])

the value of generator_l2_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

generator_l2_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_voltage_variance_average is ' + status['generator_l2_voltage_variance_average'])

the value of generator_l2_voltage_variance_average is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l2_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_voltage_variance_high is ' + status['generator_l2_voltage_variance_high'])

the value of generator_l2_voltage_variance_high is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l2_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_voltage_variance_low is ' + status['generator_l2_voltage_variance_low'])

the value of generator_l2_voltage_variance_low is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l2_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l2_wattage is ' + status['generator_l2_wattage'])

the value of generator_l2_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

generator_l3_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_apparent_power is ' + status['generator_l3_apparent_power'])

the value of generator_l3_apparent_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

generator_l3_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_current is ' + status['generator_l3_current'])

the value of generator_l3_current is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l3_dc_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_dc_current is ' + status['generator_l3_dc_current'])

the value of generator_l3_dc_current is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

generator_l3_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_kwh_bought_today is ' + status['generator_l3_kwh_bought_today'])

the value of generator_l3_kwh_bought_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l3_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_kwh_sold_today is ' + status['generator_l3_kwh_sold_today'])

the value of generator_l3_kwh_sold_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

generator_l3_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_mwh_bought_lifetime is ' + status['generator_l3_mwh_bought_lifetime'])

the value of generator_l3_mwh_bought_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l3_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_mwh_sold_lifetime is ' + status['generator_l3_mwh_sold_lifetime'])

the value of generator_l3_mwh_sold_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

generator_l3_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_power_factor is ' + status['generator_l3_power_factor'])

the value of generator_l3_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l3_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_voltage is ' + status['generator_l3_voltage'])

the value of generator_l3_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

generator_l3_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_voltage_variance_average is ' + status['generator_l3_voltage_variance_average'])

the value of generator_l3_voltage_variance_average is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l3_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_voltage_variance_high is ' + status['generator_l3_voltage_variance_high'])

the value of generator_l3_voltage_variance_high is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l3_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_voltage_variance_low is ' + status['generator_l3_voltage_variance_low'])

the value of generator_l3_voltage_variance_low is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

generator_l3_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_l3_wattage is ' + status['generator_l3_wattage'])

the value of generator_l3_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

generator_last_start_reason

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_last_start_reason is ' + status['generator_last_start_reason'])

the value of generator_last_start_reason is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> NONE
1 -> MANUAL
2 -> BATTERY_VOLTAGE
3 -> SOC
4 -> LOAD
5 -> EXERCISE

generator_last_stop_reason

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_last_stop_reason is ' + status['generator_last_stop_reason'])

the value of generator_last_stop_reason is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> NONE
1 -> MANUAL
2 -> BATTERY_VOLTAGE
3 -> SOC
4 -> LOAD
5 -> EXERCISE

generator_realtime_frequency

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_realtime_frequency is ' + status['generator_realtime_frequency'])

the value of generator_realtime_frequency is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_HERTZ
decimalScale: 2

generator_started_date_time

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_started_date_time is ' + status['generator_started_date_time'])

the value of generator_started_date_time is 1970-01-01 00:00:00

Description

type: number
default: 0

generator_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_status is ' + status['generator_status'])

the value of generator_status is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF
1 -> STARTING
2 -> WARMUP
3 -> EXERCISING
4 -> COOLDOWN
5 -> CONNECTED
6 -> WAITING
7 -> OUT_OF_SPEC

generator_time_remaining

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_time_remaining is ' + status['generator_time_remaining'])

the value of generator_time_remaining is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_MINUTE_SECOND
decimalScale: 0

generator_time_running_seconds

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_time_running_seconds is ' + status['generator_time_running_seconds'])

the value of generator_time_running_seconds is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_SECOND
decimalScale: 0

generator_total_lifetime_hours

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_total_lifetime_hours is ' + status['generator_total_lifetime_hours'])

the value of generator_total_lifetime_hours is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR
decimalScale: 0

generator_total_time_running_since_reset_seconds

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_total_time_running_since_reset_seconds is ' + status['generator_total_time_running_since_reset_seconds'])

the value of generator_total_time_running_since_reset_seconds is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_HOUR
decimalScale: 0

generator_wattage_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of generator_wattage_sum is ' + status['generator_wattage_sum'])

the value of generator_wattage_sum is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

grid_kw_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_kw_max is ' + status['grid_kw_max'])

the value of grid_kw_max is 10

Description

type: number
default: 10
decimalScale: 0

grid_kw_min

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_kw_min is ' + status['grid_kw_min'])

the value of grid_kw_min is 0

Description

type: number
default: 0
decimalScale: 0

grid_l1_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_apparent_power is ' + status['grid_l1_apparent_power'])

the value of grid_l1_apparent_power is 7.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

grid_l1_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_dc_amps is ' + status['grid_l1_dc_amps'])

the value of grid_l1_dc_amps is 1.9999999553E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l1_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_kwh_bought_today is ' + status['grid_l1_kwh_bought_today'])

the value of grid_l1_kwh_bought_today is 2.1895999908E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l1_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_kwh_sold_today is ' + status['grid_l1_kwh_sold_today'])

the value of grid_l1_kwh_sold_today is 1.6380000114E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l1_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_mwh_bought_lifetime is ' + status['grid_l1_mwh_bought_lifetime'])

the value of grid_l1_mwh_bought_lifetime is 4.4292870164E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l1_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_mwh_sold_lifetime is ' + status['grid_l1_mwh_sold_lifetime'])

the value of grid_l1_mwh_sold_lifetime is 2.0614467561E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l1_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_power_factor is ' + status['grid_l1_power_factor'])

the value of grid_l1_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_l1_realtime_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_realtime_ac_amps is ' + status['grid_l1_realtime_ac_amps'])

the value of grid_l1_realtime_ac_amps is 7.0000000298E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l1_realtime_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_realtime_ac_voltage is ' + status['grid_l1_realtime_ac_voltage'])

the value of grid_l1_realtime_ac_voltage is 1.2019999695E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AC
decimalScale: 2

grid_l1_realtime_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_realtime_wattage is ' + status['grid_l1_realtime_wattage'])

the value of grid_l1_realtime_wattage is -2399

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

grid_l1_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_voltage_variance_average is ' + status['grid_l1_voltage_variance_average'])

the value of grid_l1_voltage_variance_average is 1.2019999695E+02

Description

type: number
default: 0
decimalScale: 2

grid_l1_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_voltage_variance_high is ' + status['grid_l1_voltage_variance_high'])

the value of grid_l1_voltage_variance_high is 1.2019999695E+02

Description

type: number
default: 0
decimalScale: 2

grid_l1_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l1_voltage_variance_low is ' + status['grid_l1_voltage_variance_low'])

the value of grid_l1_voltage_variance_low is 1.2019999695E+02

Description

type: number
default: 0
decimalScale: 2

grid_l2_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_apparent_power is ' + status['grid_l2_apparent_power'])

the value of grid_l2_apparent_power is 7.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

grid_l2_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_dc_amps is ' + status['grid_l2_dc_amps'])

the value of grid_l2_dc_amps is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l2_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_kwh_bought_today is ' + status['grid_l2_kwh_bought_today'])

the value of grid_l2_kwh_bought_today is 2.7246999741E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l2_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_kwh_sold_today is ' + status['grid_l2_kwh_sold_today'])

the value of grid_l2_kwh_sold_today is 7.2999998927E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l2_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_mwh_bought_lifetime is ' + status['grid_l2_mwh_bought_lifetime'])

the value of grid_l2_mwh_bought_lifetime is 5.4245275259E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l2_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_mwh_sold_lifetime is ' + status['grid_l2_mwh_sold_lifetime'])

the value of grid_l2_mwh_sold_lifetime is 8.8011128828E-03

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l2_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_power_factor is ' + status['grid_l2_power_factor'])

the value of grid_l2_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_l2_realtime_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_realtime_ac_amps is ' + status['grid_l2_realtime_ac_amps'])

the value of grid_l2_realtime_ac_amps is 5.9999998659E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l2_realtime_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_realtime_ac_voltage is ' + status['grid_l2_realtime_ac_voltage'])

the value of grid_l2_realtime_ac_voltage is 1.2050000000E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AC
decimalScale: 2

grid_l2_realtime_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_realtime_wattage is ' + status['grid_l2_realtime_wattage'])

the value of grid_l2_realtime_wattage is -2542

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

grid_l2_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_voltage_variance_average is ' + status['grid_l2_voltage_variance_average'])

the value of grid_l2_voltage_variance_average is 1.2050000000E+02

Description

type: number
default: 0
decimalScale: 2

grid_l2_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_voltage_variance_high is ' + status['grid_l2_voltage_variance_high'])

the value of grid_l2_voltage_variance_high is 1.2050000000E+02

Description

type: number
default: 0
decimalScale: 2

grid_l2_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l2_voltage_variance_low is ' + status['grid_l2_voltage_variance_low'])

the value of grid_l2_voltage_variance_low is 1.2050000000E+02

Description

type: number
default: 0
decimalScale: 2

grid_l3_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_apparent_power is ' + status['grid_l3_apparent_power'])

the value of grid_l3_apparent_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

grid_l3_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_dc_amps is ' + status['grid_l3_dc_amps'])

the value of grid_l3_dc_amps is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l3_kwh_bought_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_kwh_bought_today is ' + status['grid_l3_kwh_bought_today'])

the value of grid_l3_kwh_bought_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l3_kwh_sold_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_kwh_sold_today is ' + status['grid_l3_kwh_sold_today'])

the value of grid_l3_kwh_sold_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

grid_l3_mwh_bought_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_mwh_bought_lifetime is ' + status['grid_l3_mwh_bought_lifetime'])

the value of grid_l3_mwh_bought_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l3_mwh_sold_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_mwh_sold_lifetime is ' + status['grid_l3_mwh_sold_lifetime'])

the value of grid_l3_mwh_sold_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

grid_l3_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_power_factor is ' + status['grid_l3_power_factor'])

the value of grid_l3_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_l3_realtime_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_realtime_ac_amps is ' + status['grid_l3_realtime_ac_amps'])

the value of grid_l3_realtime_ac_amps is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_l3_realtime_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_realtime_ac_voltage is ' + status['grid_l3_realtime_ac_voltage'])

the value of grid_l3_realtime_ac_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AC
decimalScale: 2

grid_l3_realtime_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_realtime_wattage is ' + status['grid_l3_realtime_wattage'])

the value of grid_l3_realtime_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

grid_l3_voltage_variance_average

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_voltage_variance_average is ' + status['grid_l3_voltage_variance_average'])

the value of grid_l3_voltage_variance_average is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_l3_voltage_variance_high

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_voltage_variance_high is ' + status['grid_l3_voltage_variance_high'])

the value of grid_l3_voltage_variance_high is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_l3_voltage_variance_low

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_l3_voltage_variance_low is ' + status['grid_l3_voltage_variance_low'])

the value of grid_l3_voltage_variance_low is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

grid_measurement_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_measurement_status is ' + status['grid_measurement_status'])

the value of grid_measurement_status is 0

Description

type: number
default: 0
decimalScale: 0

grid_realtime_ac_amps_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_realtime_ac_amps_sum is ' + status['grid_realtime_ac_amps_sum'])

the value of grid_realtime_ac_amps_sum is 1.2999999523E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

grid_realtime_frequency

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_realtime_frequency is ' + status['grid_realtime_frequency'])

the value of grid_realtime_frequency is 6.0035999298E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_HERTZ
decimalScale: 2

grid_realtime_wattage_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_realtime_wattage_sum is ' + status['grid_realtime_wattage_sum'])

the value of grid_realtime_wattage_sum is -4941

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

grid_sell_reconnect_timer

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_sell_reconnect_timer is ' + status['grid_sell_reconnect_timer'])

the value of grid_sell_reconnect_timer is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_MINUTE_SECOND
decimalScale: 0

grid_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of grid_status is ' + status['grid_status'])

the value of grid_status is 5

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF_GRID
1 -> OUT_OF_SPEC
2 -> WAITING_TO_CONNECT
3 -> GRID_ZERO
4 -> DROPPED
5 -> CONNECTED

inverter_current_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_current_status is ' + status['inverter_current_status'])

the value of inverter_current_status is 1

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF
1 -> NORMAL
2 -> OVER_TEMP
3 -> UNDER_TEMP
4 -> FAULT

inverter_event_ac_disconnect

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_ac_disconnect is ' + status['inverter_event_ac_disconnect'])

the value of inverter_event_ac_disconnect is false

Description

type: boolean
default: false

inverter_event_ac_over_volt

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_ac_over_volt is ' + status['inverter_event_ac_over_volt'])

the value of inverter_event_ac_over_volt is false

Description

type: boolean
default: false

inverter_event_ac_under_volt

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_ac_under_volt is ' + status['inverter_event_ac_under_volt'])

the value of inverter_event_ac_under_volt is false

Description

type: boolean
default: false

inverter_event_blown_string_fuse

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_blown_string_fuse is ' + status['inverter_event_blown_string_fuse'])

the value of inverter_event_blown_string_fuse is false

Description

type: boolean
default: false

inverter_event_cabinet_open

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_cabinet_open is ' + status['inverter_event_cabinet_open'])

the value of inverter_event_cabinet_open is false

Description

type: boolean
default: false

inverter_event_dc_disconnect

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_dc_disconnect is ' + status['inverter_event_dc_disconnect'])

the value of inverter_event_dc_disconnect is false

Description

type: boolean
default: false

inverter_event_dc_over_volt

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_dc_over_volt is ' + status['inverter_event_dc_over_volt'])

the value of inverter_event_dc_over_volt is false

Description

type: boolean
default: false

inverter_event_grid_disconnect

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_grid_disconnect is ' + status['inverter_event_grid_disconnect'])

the value of inverter_event_grid_disconnect is false

Description

type: boolean
default: false

inverter_event_ground_fault

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_ground_fault is ' + status['inverter_event_ground_fault'])

the value of inverter_event_ground_fault is false

Description

type: boolean
default: false

inverter_event_hardware_test_failure

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_hardware_test_failure is ' + status['inverter_event_hardware_test_failure'])

the value of inverter_event_hardware_test_failure is false

Description

type: boolean
default: false

inverter_event_manual_shutdown

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_manual_shutdown is ' + status['inverter_event_manual_shutdown'])

the value of inverter_event_manual_shutdown is false

Description

type: boolean
default: false

inverter_event_memory_loss

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_memory_loss is ' + status['inverter_event_memory_loss'])

the value of inverter_event_memory_loss is false

Description

type: boolean
default: false

inverter_event_over_frequency

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_over_frequency is ' + status['inverter_event_over_frequency'])

the value of inverter_event_over_frequency is false

Description

type: boolean
default: false

inverter_event_over_temp

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_over_temp is ' + status['inverter_event_over_temp'])

the value of inverter_event_over_temp is false

Description

type: boolean
default: false

inverter_event_under_frequency

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_under_frequency is ' + status['inverter_event_under_frequency'])

the value of inverter_event_under_frequency is false

Description

type: boolean
default: false

inverter_event_under_temp

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_event_under_temp is ' + status['inverter_event_under_temp'])

the value of inverter_event_under_temp is false

Description

type: boolean
default: false

inverter_fault_status_battery_input

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_battery_input is ' + status['inverter_fault_status_battery_input'])

the value of inverter_fault_status_battery_input is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_battery_other

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_battery_other is ' + status['inverter_fault_status_battery_other'])

the value of inverter_fault_status_battery_other is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_battery_output

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_battery_output is ' + status['inverter_fault_status_battery_output'])

the value of inverter_fault_status_battery_output is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_generator_input

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_generator_input is ' + status['inverter_fault_status_generator_input'])

the value of inverter_fault_status_generator_input is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_generator_other

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_generator_other is ' + status['inverter_fault_status_generator_other'])

the value of inverter_fault_status_generator_other is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_generator_output

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_generator_output is ' + status['inverter_fault_status_generator_output'])

the value of inverter_fault_status_generator_output is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_grid_input

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_grid_input is ' + status['inverter_fault_status_grid_input'])

the value of inverter_fault_status_grid_input is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_grid_other

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_grid_other is ' + status['inverter_fault_status_grid_other'])

the value of inverter_fault_status_grid_other is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_grid_output

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_grid_output is ' + status['inverter_fault_status_grid_output'])

the value of inverter_fault_status_grid_output is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_load_input

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_load_input is ' + status['inverter_fault_status_load_input'])

the value of inverter_fault_status_load_input is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_load_other

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_load_other is ' + status['inverter_fault_status_load_other'])

the value of inverter_fault_status_load_other is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_load_output

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_load_output is ' + status['inverter_fault_status_load_output'])

the value of inverter_fault_status_load_output is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_solar_input

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_solar_input is ' + status['inverter_fault_status_solar_input'])

the value of inverter_fault_status_solar_input is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_solar_other

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_solar_other is ' + status['inverter_fault_status_solar_other'])

the value of inverter_fault_status_solar_other is 0

Description

type: number
default: 0
decimalScale: 0

inverter_fault_status_solar_output

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_fault_status_solar_output is ' + status['inverter_fault_status_solar_output'])

the value of inverter_fault_status_solar_output is 0

Description

type: number
default: 0
decimalScale: 0

inverter_operating_state_generic

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_operating_state_generic is ' + status['inverter_operating_state_generic'])

the value of inverter_operating_state_generic is 1

Description

type: string
default: 1

Possible Values (Enumeration)

1 -> OFF
2 -> SLEEPING
3 -> STARTING
4 -> MPPT
5 -> THROTTLED
6 -> SHUTTING_DOWN
7 -> FAULT
8 -> STANDBY

inverter_paralleling_units_discovered

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of inverter_paralleling_units_discovered is ' + status['inverter_paralleling_units_discovered'])

the value of inverter_paralleling_units_discovered is 1

Description

type: number
default: 1
decimalScale: 0

load_ac_current_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_ac_current_sum is ' + status['load_ac_current_sum'])

the value of load_ac_current_sum is 1.2999999523E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_combined_l1_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_combined_l1_wattage is ' + status['load_combined_l1_wattage'])

the value of load_combined_l1_wattage is 2399

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_combined_l2_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_combined_l2_wattage is ' + status['load_combined_l2_wattage'])

the value of load_combined_l2_wattage is 2542

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_combined_l3_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_combined_l3_wattage is ' + status['load_combined_l3_wattage'])

the value of load_combined_l3_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_combined_wattage_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_combined_wattage_sum is ' + status['load_combined_wattage_sum'])

the value of load_combined_wattage_sum is 4941

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_consuming_total_kw_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_consuming_total_kw_max is ' + status['load_consuming_total_kw_max'])

the value of load_consuming_total_kw_max is 20

Description

type: number
default: 20
decimalScale: 0

load_consuming_total_kw_min

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_consuming_total_kw_min is ' + status['load_consuming_total_kw_min'])

the value of load_consuming_total_kw_min is 0

Description

type: number
default: 0
decimalScale: 0

load_l1_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_ac_amps is ' + status['load_l1_ac_amps'])

the value of load_l1_ac_amps is 1.0999999940E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l1_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_ac_voltage is ' + status['load_l1_ac_voltage'])

the value of load_l1_ac_voltage is 1.2009999847E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

load_l1_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_apparent_power is ' + status['load_l1_apparent_power'])

the value of load_l1_apparent_power is 1.4000000000E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

load_l1_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_dc_amps is ' + status['load_l1_dc_amps'])

the value of load_l1_dc_amps is 1.4800000191E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l1_kwh_consumed_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_kwh_consumed_today is ' + status['load_l1_kwh_consumed_today'])

the value of load_l1_kwh_consumed_today is 2.4259000778E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l1_kwh_produced_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_kwh_produced_today is ' + status['load_l1_kwh_produced_today'])

the value of load_l1_kwh_produced_today is 4.5000001788E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l1_mwh_consumed_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_mwh_consumed_lifetime is ' + status['load_l1_mwh_consumed_lifetime'])

the value of load_l1_mwh_consumed_lifetime is 5.0568646193E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l1_mwh_produced_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_mwh_produced_lifetime is ' + status['load_l1_mwh_produced_lifetime'])

the value of load_l1_mwh_produced_lifetime is 8.3800387802E-04

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l1_output_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_output_power_factor is ' + status['load_l1_output_power_factor'])

the value of load_l1_output_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

load_l1_self_supply

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_self_supply is ' + status['load_l1_self_supply'])

the value of load_l1_self_supply is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_l1_self_supply_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_self_supply_lifetime is ' + status['load_l1_self_supply_lifetime'])

the value of load_l1_self_supply_lifetime is 6.6474147141E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l1_self_supply_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_self_supply_today is ' + status['load_l1_self_supply_today'])

the value of load_l1_self_supply_today is 2.4920001030E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l1_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l1_wattage is ' + status['load_l1_wattage'])

the value of load_l1_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_l2_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_ac_amps is ' + status['load_l2_ac_amps'])

the value of load_l2_ac_amps is 1.9999999553E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l2_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_ac_voltage is ' + status['load_l2_ac_voltage'])

the value of load_l2_ac_voltage is 1.2050000000E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

load_l2_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_apparent_power is ' + status['load_l2_apparent_power'])

the value of load_l2_apparent_power is 3.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

load_l2_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_dc_amps is ' + status['load_l2_dc_amps'])

the value of load_l2_dc_amps is 3.3000001311E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l2_kwh_consumed_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_kwh_consumed_today is ' + status['load_l2_kwh_consumed_today'])

the value of load_l2_kwh_consumed_today is 3.1077999115E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l2_kwh_produced_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_kwh_produced_today is ' + status['load_l2_kwh_produced_today'])

the value of load_l2_kwh_produced_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l2_mwh_consumed_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_mwh_consumed_lifetime is ' + status['load_l2_mwh_consumed_lifetime'])

the value of load_l2_mwh_consumed_lifetime is 6.1500924826E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l2_mwh_produced_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_mwh_produced_lifetime is ' + status['load_l2_mwh_produced_lifetime'])

the value of load_l2_mwh_produced_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l2_output_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_output_power_factor is ' + status['load_l2_output_power_factor'])

the value of load_l2_output_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

load_l2_self_supply

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_self_supply is ' + status['load_l2_self_supply'])

the value of load_l2_self_supply is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_l2_self_supply_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_self_supply_lifetime is ' + status['load_l2_self_supply_lifetime'])

the value of load_l2_self_supply_lifetime is 7.6204463840E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l2_self_supply_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_self_supply_today is ' + status['load_l2_self_supply_today'])

the value of load_l2_self_supply_today is 3.9549999237E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l2_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l2_wattage is ' + status['load_l2_wattage'])

the value of load_l2_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_l3_ac_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_ac_amps is ' + status['load_l3_ac_amps'])

the value of load_l3_ac_amps is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l3_ac_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_ac_voltage is ' + status['load_l3_ac_voltage'])

the value of load_l3_ac_voltage is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

load_l3_apparent_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_apparent_power is ' + status['load_l3_apparent_power'])

the value of load_l3_apparent_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_AMPERE
decimalScale: 2

load_l3_dc_amps

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_dc_amps is ' + status['load_l3_dc_amps'])

the value of load_l3_dc_amps is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

load_l3_kwh_consumed_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_kwh_consumed_today is ' + status['load_l3_kwh_consumed_today'])

the value of load_l3_kwh_consumed_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l3_kwh_produced_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_kwh_produced_today is ' + status['load_l3_kwh_produced_today'])

the value of load_l3_kwh_produced_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l3_mwh_consumed_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_mwh_consumed_lifetime is ' + status['load_l3_mwh_consumed_lifetime'])

the value of load_l3_mwh_consumed_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l3_mwh_produced_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_mwh_produced_lifetime is ' + status['load_l3_mwh_produced_lifetime'])

the value of load_l3_mwh_produced_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l3_output_power_factor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_output_power_factor is ' + status['load_l3_output_power_factor'])

the value of load_l3_output_power_factor is 1.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

load_l3_self_supply

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_self_supply is ' + status['load_l3_self_supply'])

the value of load_l3_self_supply is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_l3_self_supply_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_self_supply_lifetime is ' + status['load_l3_self_supply_lifetime'])

the value of load_l3_self_supply_lifetime is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_l3_self_supply_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_self_supply_today is ' + status['load_l3_self_supply_today'])

the value of load_l3_self_supply_today is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_l3_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_l3_wattage is ' + status['load_l3_wattage'])

the value of load_l3_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_percentage_inverter_capacity

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_percentage_inverter_capacity is ' + status['load_percentage_inverter_capacity'])

the value of load_percentage_inverter_capacity is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_PERCENT
decimalScale: 0

load_realtime_frequency

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_realtime_frequency is ' + status['load_realtime_frequency'])

the value of load_realtime_frequency is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_HERTZ
decimalScale: 2

load_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_status is ' + status['load_status'])

the value of load_status is 3

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF
1 -> POWERED
2 -> SUPPORT
3 -> PASS_THROUGH
4 -> AC_COUPLE

load_total_self_supply

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_total_self_supply is ' + status['load_total_self_supply'])

the value of load_total_self_supply is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_total_self_supply_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_total_self_supply_lifetime is ' + status['load_total_self_supply_lifetime'])

the value of load_total_self_supply_lifetime is 1.5148065984E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

load_total_self_supply_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_total_self_supply_today is ' + status['load_total_self_supply_today'])

the value of load_total_self_supply_today is 7.7899999619E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

load_unprotected_l1_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_unprotected_l1_wattage is ' + status['load_unprotected_l1_wattage'])

the value of load_unprotected_l1_wattage is 2399

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_unprotected_l2_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_unprotected_l2_wattage is ' + status['load_unprotected_l2_wattage'])

the value of load_unprotected_l2_wattage is 2542

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_unprotected_l3_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_unprotected_l3_wattage is ' + status['load_unprotected_l3_wattage'])

the value of load_unprotected_l3_wattage is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

load_wattage_sum

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of load_wattage_sum is ' + status['load_wattage_sum'])

the value of load_wattage_sum is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

network_optics_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of network_optics_status is ' + status['network_optics_status'])

the value of network_optics_status is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> DISABLED
1 -> CONNECTING
2 -> CONNECTED
3 -> SYNCHING
4 -> ERROR_TIMEOUT
5 -> ERROR_COMM_FAILURE

network_placeholder_skybox_count

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of network_placeholder_skybox_count is ' + status['network_placeholder_skybox_count'])

the value of network_placeholder_skybox_count is 1

Description

type: number
default: 1
decimalScale: 0

pv_array_temperature_realtime_celsius

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_array_temperature_realtime_celsius is ' + status['pv_array_temperature_realtime_celsius'])

the value of pv_array_temperature_realtime_celsius is 0

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

pv_bb_input_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_bb_input_voltage is ' + status['pv_bb_input_voltage'])

the value of pv_bb_input_voltage is 5.5334889889E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

pv_input_current

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_input_current is ' + status['pv_input_current'])

the value of pv_input_current is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

pv_input_power

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_input_power is ' + status['pv_input_power'])

the value of pv_input_power is 0.0000000000E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
scalingFactor: 0.001
decimalScale: 2

pv_kwh_today

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_kwh_today is ' + status['pv_kwh_today'])

the value of pv_kwh_today is 9.1020164490E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KWH
decimalScale: 2

pv_max_voc_date_time_of_occurrence

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_max_voc_date_time_of_occurrence is ' + status['pv_max_voc_date_time_of_occurrence'])

the value of pv_max_voc_date_time_of_occurrence is 1431518123

Description

type: number
default: 0

pv_max_voc_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_max_voc_voltage is ' + status['pv_max_voc_voltage'])

the value of pv_max_voc_voltage is 5.5240002441E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT_DC
decimalScale: 2

pv_measurement_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_measurement_status is ' + status['pv_measurement_status'])

the value of pv_measurement_status is 0

Description

type: number
default: 0
decimalScale: 0

pv_mpp_state

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_mpp_state is ' + status['pv_mpp_state'])

the value of pv_mpp_state is 0

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> OFF
1 -> TRACKING
2 -> NETZERO
3 -> POWER_LIMITED

pv_mwh_lifetime

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_mwh_lifetime is ' + status['pv_mwh_lifetime'])

the value of pv_mwh_lifetime is 1.8664027750E-01

Description

type: number
default: 0
unitOfMeasure: UNIT_MWH
decimalScale: 2

pv_output_current_dc

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_output_current_dc is ' + status['pv_output_current_dc'])

the value of pv_output_current_dc is 2.9377471656E-02

Description

type: number
default: 0
unitOfMeasure: UNIT_AMPERE
decimalScale: 2

pv_output_power_dc

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_output_power_dc is ' + status['pv_output_power_dc'])

the value of pv_output_power_dc is 9.0553846359E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_KW
decimalScale: 2

pv_output_voltage_dc

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_output_voltage_dc is ' + status['pv_output_voltage_dc'])

the value of pv_output_voltage_dc is 3.0842050171E+02

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

pv_peak_power_date_time

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_peak_power_date_time is ' + status['pv_peak_power_date_time'])

the value of pv_peak_power_date_time is 1628877005

Description

type: number
default: 0

pv_peak_power_wattage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_peak_power_wattage is ' + status['pv_peak_power_wattage'])

the value of pv_peak_power_wattage is 3.7113469238E+03

Description

type: number
default: 0
unitOfMeasure: UNIT_WATT
decimalScale: 2

pv_pmb_ird_ratio_a

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_pmb_ird_ratio_a is ' + status['pv_pmb_ird_ratio_a'])

the value of pv_pmb_ird_ratio_a is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

pv_pmb_ird_ratio_b

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_pmb_ird_ratio_b is ' + status['pv_pmb_ird_ratio_b'])

the value of pv_pmb_ird_ratio_b is 0.0000000000E+00

Description

type: number
default: 0
decimalScale: 2

pv_pmb_positive_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_pmb_positive_voltage is ' + status['pv_pmb_positive_voltage'])

the value of pv_pmb_positive_voltage is 8.1999998093E+00

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

pv_pmb_voltage

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_pmb_voltage is ' + status['pv_pmb_voltage'])

the value of pv_pmb_voltage is 1.5100000381E+01

Description

type: number
default: 0
unitOfMeasure: UNIT_VOLT
decimalScale: 2

pv_production_realtime_kw_max

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_production_realtime_kw_max is ' + status['pv_production_realtime_kw_max'])

the value of pv_production_realtime_kw_max is 6

Description

type: number
default: 6
decimalScale: 0

pv_production_realtime_kw_min

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_production_realtime_kw_min is ' + status['pv_production_realtime_kw_min'])

the value of pv_production_realtime_kw_min is 0

Description

type: number
default: 0
decimalScale: 0

pv_status

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_status is ' + status['pv_status'])

the value of pv_status is 3

Description

type: string
default: 0

Possible Values (Enumeration)

0 -> NONE
1 -> PRODUCING
2 -> WAITING
3 -> SLEEPING
4 -> FAULT
5 -> SWEEPING
6 -> TESTING

pv_temperature_bb

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_temperature_bb is ' + status['pv_temperature_bb'])

the value of pv_temperature_bb is 37

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

pv_temperature_inductor

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_temperature_inductor is ' + status['pv_temperature_inductor'])

the value of pv_temperature_inductor is 37

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

pv_temperature_lenso

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of pv_temperature_lenso is ' + status['pv_temperature_lenso'])

the value of pv_temperature_lenso is 37

Description

type: number
default: 0
unitOfMeasure: UNIT_CELSIUS
decimalScale: 0

rt_action_enable_afci_test

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_action_enable_afci_test is ' + status['rt_action_enable_afci_test'])

the value of rt_action_enable_afci_test is false

Description

type: boolean
default: false

rt_action_enable_gfdi_test

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_action_enable_gfdi_test is ' + status['rt_action_enable_gfdi_test'])

the value of rt_action_enable_gfdi_test is false

Description

type: boolean
default: false

rt_action_enable_ird_test

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_action_enable_ird_test is ' + status['rt_action_enable_ird_test'])

the value of rt_action_enable_ird_test is false

Description

type: boolean
default: false

rt_last_ran_time_afci

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_last_ran_time_afci is ' + status['rt_last_ran_time_afci'])

the value of rt_last_ran_time_afci is 1629715500

Description

type: number
default: 0
decimalScale: 0

rt_last_ran_time_gfdi

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_last_ran_time_gfdi is ' + status['rt_last_ran_time_gfdi'])

the value of rt_last_ran_time_gfdi is 1629715499

Description

type: number
default: 0
decimalScale: 0

rt_last_ran_time_ird

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_last_ran_time_ird is ' + status['rt_last_ran_time_ird'])

the value of rt_last_ran_time_ird is 1629715495

Description

type: number
default: 0
decimalScale: 0

rt_test_result_afci

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_test_result_afci is ' + status['rt_test_result_afci'])

the value of rt_test_result_afci is true

Description

type: boolean
default: false

rt_test_result_gfdi

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_test_result_gfdi is ' + status['rt_test_result_gfdi'])

the value of rt_test_result_gfdi is true

Description

type: boolean
default: false

rt_test_result_ird

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of rt_test_result_ird is ' + status['rt_test_result_ird'])

the value of rt_test_result_ird is true

Description

type: boolean
default: false

schema_version_number

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of schema_version_number is ' + status['schema_version_number'])

the value of schema_version_number is 27

Description

type: string
default: 27

time_stamp

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of time_stamp is ' + status['time_stamp'])

the value of time_stamp is 2021-08-24 01:59:47

Description

type: string
default: 0

time_stamp_utc

Example

import json
import SkyboxAPI
s = SkyboxAPI.SkyboxAPI()
status = s.getStatus()
print('The value of time_stamp_utc is ' + status['time_stamp_utc'])

the value of time_stamp_utc is 1629770387

Description

type: number
default: 0
unitOfMeasure: UNIT_SECOND
decimalScale: 0

License

zackramjan/outback_skybox_api

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages