Accelerator-based In-situ Materials Surveillance

The ADAQ (AIMS Data AcQuisition) libraries provide a powerful set of C++ and Python tools for comprehensive data acquisition and analysis of experimental and simulated particle detector data. The 'ADAQControl' library (C++, Python) forms a self-contained software layer that manages the interface between CAEN data acquisition hardware and the user's PC by automatically incorporating the necessary CAEN libraries (CAENComm, CAENDigitizer, and CAENVME) and then adding nn enhanced layer of functionality on top to provide more powerful and straightforward control of the CAEN hardware. The 'ADAQReadout' library provides standardized readout of all critical information (DAQ settings, digitized waveforms, analyzed waveform data, etc) into highly compressed binary 'ADAQ' files. The 'ASIMReadout' library provides standardized readout of critical simulated detector quantities into highly compressed binary 'ASIM' files when used in C++-compatible Monte Carlo particle transport codes like Geant4. Both libraries are built ontop of the ROOT data analysis framework. The ADAQ and ASIM files can be analyzed offline using the GUI-based ADAQAnalysis program. Finally, a set of classes are provided for use of ADAQ projects that incorporate ROOT.

Thus, the ADAQ framework can be envisioned as follows:

                                       ----------------
                                       | ROOT classes | : Classes for integrating ROOT
                                       ----------------     into ADAQ projects
                                               |
               ADAQControl,ADAQReadout         |        
                  ---------------              |        
------------      | CAEN Libs   |     ------------------
|   CAEN   |  ->  |     &       | ->  |  Acquisition & | : User applications built 
| Hardware |  ->  |  Enhanced   | ->  |    Analysis    |     with the ADAQ framework
------------      | Interfaces  |     ------------------
                  ---------------              |
                                               |
                                               |
                                    -----------------------	
                                    | Detector simulation | : Readout management for
                                    -----------------------     simulated detector data
                                         ASIMReadout	

The ADAQ libraries are licensed under the GNU General Public License v3.0. You have the right to modify and/or redistribute this source code under the terms specified in the license,

The ADAQ libraries are provided without any warranty nor guarantee of fitness for any particular purpose. The author(s) shall have no liability for direct, indirect, or other undesirable consequences of any character that may result from the use of this source code. This may include - but is not limited - to irrevocable changes to the user's firmware, software, hardware, or data. By your use of ADAQ, you implicitly agree to absolve the author(s) of any liability whatsoever. The reader is encouraged to consult the ADAQ User's Guide and is advised that the use of this source code is at his or her own risk.

The CAEN libraries - which are distributed (a) for the user's convenience and (b) to ensure version compatibility - are also licensed under the GNU General Public License v3.0 by CAEN S.p.A.

A copy of the GNU General Public License v3.0 may be found within this repository at $ADAQ/License.md or is available online at http:https://www.gnu.org/licenses.

The ADAQ libraries depend on the following external codes and libraries:

1. GNU make

2. Boost

3. ROOT

First, a word on versioning of the ADAQ libraries. Git tags of the form X.Y.Z are used to indicate stable, production versions of the ADAQ libraries that may be deployed with confidence for general use by the general user. A change in the X version number indicates a major release that departs substantially from the previous series, while a change in the Y version number indicates deployment of major new code features. A change in the Z number is used to indicate bug fixes and very minor changes to the codebase. Untagged commits are considered development versions of the code with no guarantee of stability and should only be used by developers in non-production situations.

To obtain the ADAQ libraries, you'll need to first clone the repository from GitHub and then configure your environment via the 'setup.sh' script. Once complete, you can then switch to a tagged production version to build the code. At present, you'll need to build each ADAQ library individually using the GNU makefiles provided in each library's source directory to build and install the libraries into the $ADAQREPO/include (for headers) and $ADAQREPO/lib/ (for libraries, where '' is either i686 (32-bit) or x86_64 (64-bit)).

First clone the repository:

git clone https://github.com/zach-hartwig/ADAQ.git

Then add the following line to your .bashrc file:

source /full/path/to/ADAQ/scripts/setup.sh >& /dev/null

Remember to open a new terminal for the settings to take effect! Finally, switch to a tagged production branch and build the libraries. In this example, we'll use the 1.0.0-beta version:

cd /full/path/to/ADAQ/source
git checkout -b 1.0.0-beta

# Build/install each desired library
cd ADAQControl; make; make install
cd ../ADAQReadout; make; make install
cd ../ASIMReadout; make; make install

If you want to remove the build files and local library then - from within each library's directory - type:

   make clean

Note that this will only remove local files and not the installed libraries, which live in the $ADAQREPO/lib// directory

The following contains an overview of the ADAQ directories:

Each ADAQ library lives in its own subdirectory of the $ADAQREPO/source directory. At present, each library must be built/installed separately rather by a single large GNU makefile. While this may change in the future, this enables the user to independently build the ADAQControl library without installing ROOT on the system since ROOT is not an ADAQControl dependency; the ADAQReadout and ASIMReadout libraries require a ROOT installation.

The ADAQControl library serves three main functions: first, to automically provide the user with all necessary and up-to-date CAEN libraries and headers. No need to go downloading and installing them anymore! The CAEN libraries and headers are located locally within the $ADAQREPO directory, and, therefore, will not interfere with other global installations of CAEN headers and libraries. The second function is to wrap all CAEN library functions with a more intuitive and consistent function style; third and finally, to build upon the CAEN library methods and provide a set of powerful enhanced methods for programming, operating, and readout of CAEN data acquisition hardware. Classes are provided the logically map onto the supported pieces of CAEN hardware (e.g. the ADAQDigitizer class provides an interface to support CAEN desktop and VME digitizers). Additionally, the ADAQPythonWrapper class uses Boost.Python to wrap all C++ classes such that the user has the additional option of seamless Python interface without the need to rewrite any code.

The ADAQReadout and ASIMReadout library provides a streamlined method to readout expeirment DAQ settings and digitizer data and simulated detector data, respectively, into highly compressed, binary ROOT files that have a standardized format. This provides the ability to easily store digitized data along with the acquisition settings for offline analysis, using the closely associated [ADAQAnalysis](https://github.com/zach-hartwig/ADAQAnalysis] program, on the ROOT command line, or in an analysis program of the user's own design. One of the main purposes in providing these classes is to facilitate the often difficult task of folding ROOT into the user's own experimental and simulation codes.

The $ADAQREPO/ref/caen directory contains an assortment of useful CAEN drivers, firmware, and software that are - in most cases - required to work with the ADAQ libraries and - in a few cases - provided simply for convenience. The purpose of including the CAEN software libraries is twofold. First, by having the software libraries within the ADAQ repository, the user does not need to install the CAEN libraries and header files on his/her system since they can be built again/linked to in the user's application! This provides convenience (no installation necessary), consistency (since CAEN coding and naming conventions are all over the place), rapid portability between machines, aand flexibility to easily use different libraries/header files. Second, this ensures that ADAQ is always associated with specific version of the CAEN software libraries for compatibility and consistency.

At present, the following, most up-to-date CAEN libraries have been tested succesfully used with the ADAQ libraries:

• CAENComm-1.2.0 (Dec 2013)
• CAENVMELib-2.41.0 (Mar 2013)
• CAENDigitizer-2.6.0 (Sept 2014)

• include/ : The main directory for all ADAQ and CAEN header files

• lib/ : The main library directory for the ADAQ and CAEN libraries

  • i686/ : 32-bit libraries
  • x86_64 : 64-bit libraries

• ref/ : Useful references, archival material, and documentation

  • caen/ : CAEN drivers, firmware, and software used as part of ADAQ

    • drivers/ : Linux drivers for the VME-USB connection
    • firmware/ : firmware for the V1718, V1720 VME boards
    • libraries/ : contains CAENComm, CAENDigitizer, and CAENVME libraries
    • manuals/ : presently useful CAEN manuals
    • notes/ : useful notes
    • software/ : CAEN-distributed binary software (e.g. CAENUpgrader tool)

  • doc/ : Future home of ADAQ manual

• source/ : ADAQ source code

  • ADAQControl/ : C++/Python interface to CAEN DAQ hardware
  • ADAQReadout/ : C++ readout of CAEN DAQ settings and digitized data to ADAQ-formatted ROOT
  • ASIMReadout/ : C++ readout of simulated detector data to ASIM-formatted ROOT files
  • root/ : Classes for use with ADAQ projects utilizing ROOT

• scripts/ : Bash scripts for installation and setup of ADAQ

• templates/ : Minimal code packages to aid user's development projects

Zach Hartwig

Dept. of Nuclear Science and Engineering &
Plasma Science and Fusion Center
Massachusetts Institute of Technology

phone: +1 617 253 5471
email: [email protected]
smail: 77 Massachusetts Ave, NW17-115, Cambridge MA 02139, USA