Custom developed board that allow you to use the STlink-V3mini or STlink-V3MODS.
This adapter board was designed to retain the STDC14 connector from STlink-V3mini.
SWD connector
| Pin | Description |
|---|---|
| 1 | Target_VCC |
| 2 | Target_SWCLK |
| 3 | Target_GND |
| 4 | Target_SWDIO |
| 5 | Target_NRST |
| 6 | Target_SWO |
The newly designed interposer board has not passed production verification, be careful of to use the adapter.
Rev 1.1 COMPANY
Rev 1.0 COMPANY
Please feel free to contact me if you need any further information.
Email: [email protected]
Thank @JojoS62 created a small box that can be 3D printed: https://www.thingiverse.com/thing:5101077