• The familiar Arduino API
• pinMode/digitalRead/digitalWrite/analogWrite
• Full SPI, Wire and Serial compatibility
• Access to STDIN/STDOUT through the Console class
• Access to system tty through the TTY library
• Process, FileIO, Client, Server and UDP implementations through the Bridge library

• Install Raspbian Jessie on your RaspberryPI
• Run these commands in the terminal.

wget https://raw.githubusercontent.com/yasir1brahim/RasPiArduino/master/scripts/configurePi.sh
chmod +x configurePi.sh
./configurePi.sh

There are 2 ways to set up the Arduino IDE :

• Using the Board Manager
• Using the Bash script

• On Preference window “Additional Boards Manager Urls” paste the json link for your Operating System.

####Linux

https://raw.githubusercontent.com/yasir1brahim/RasPiArduino/master/package_raspberrypiLinux_index.json

####OSx

Pre Requisite:

#####Install Homebrew:

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

#####Install gettext:

brew install gettext

#####JSON link

https://raw.githubusercontent.com/yasir1brahim/RasPiArduino/master/package_raspberrypiOSx_index.json

####Windows

https://raw.githubusercontent.com/yasir1brahim/RasPiArduino/master/package_raspberrypiWin_index.json

• Run the Arduino IDE .
• Go to File -> Preferences (Ctrl + Comma)
• Paste the URL in 'Additional Boards Manager URLs'. Click Ok.
• Go to Tools -> Boards -> Boards Manager
• Choose 'Contributed' from the drop down at the top left.
• Install 'Raspberry by DanKaminsky'

• Open the installation folder of Arduino IDE
• Run these commands in the terminal.

wget https://raw.githubusercontent.com/yasir1brahim/RasPiArduino/master/scripts/configureArduinoIDE.sh
chmod +x configureArduinoIDE.sh
./configureArduinoIDE.sh

• Restart Arduino IDE and select RaspberryPI from the list of boards
• Compile a sketch
• Select the RespberryPi from the list of Ports (will show the IP address)
• Upload your sketch and see it go