Skip to content

SALT (steady-state ab-initio laser theory) solver package for Julia

License

Notifications You must be signed in to change notification settings

xdavidliu/SALT.jl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SALT

This is a solver under development for the SALT equations (steady-state ab-initio lasing theory), solving them directly as a sparse nonlinear system of equations, as described in:

  • S. Esterhazy, D. Liu, M. Liertzer, A. Cerjan, L. Ge, K. G. Makris, A. D. Stone, J. M. Melenk, S. G. Johnson, and S. Rotter, “A scalable numerical approach for the steady-state ab-initio laser theory,” Phys. Rev. A 90, 023816, August 2014.

It was originally written as a standalone C program, but we are currently in the process of connecting it to a scripting front end in the Julia language.

Prerequisites

The code requires both PETSc and SLEPc to be installed. The version for both should be at least 3.7, and the MUMPS solver is used. To easily satisfy these on an Ubuntu 19.04, simply do

sudo apt install petsc-dev
sudo apt install slepc-dev

and then add the following to your ~/.bashrc:

export PETSC_DIR=/usr/lib/petscdir/petsc3.10/x86_64-linux-gnu-real
export SLEPC_DIR=/usr/lib/slepcdir/slepc3.10/x86_64-linux-gnu-real

Note if you are using Ubuntu 18.04, the installed directories are different and the maintainer of that package chose C++ instead of C as the PETSc compiler language. Due to a limitation, this breaks compatibility of the complex.h header file, so if this is the case, please build PETSc from source, as described below.

On macOS, Homebrew has a PETSc formula but it doesn't come with the MUMPS solver. One option is to build PETSc from source, as described in their homepage. We need to build with MUMPS, so use the following configure command:

./configure --download-fblaslapack --download-parmetis --download-metis --download-mumps --download-scalapack --download-openmpi

And then follow the instructions that the configure script prints to install. Also build SLEPc from source, and then finally set the PETSC_DIR and SLEPC_DIR environmental variables to the respective top-level build directories.

Now to build the SALT solver source files:

cd SALT.jl/deps
make all

If the first line of output begins with mpicc, then everything should work. If mpicxx, then PETSc was built incorrectly, and one must rebuild PETSc from source, with C as the language instead of C++.

Example

Here is an example of a simple, 1d ring laser with uniform dielectric and gain. For convenience, all of the necessary files have be prepared, and can be found in the examples/ directory. To find the first lasing threshold of the passive pole with frequency 6.3, simply do

./run_ring passive

Then make sure the run_ring file's section with the CREEPER variable is set as

CREEPER="-in0 pass_ring0
-out0 thresh_ring
-dD 0.07 -Dmax -0.001 -output_deps 0
-newtonf_tol 1e-8 -reuse_lu 0 -printnewton 1";

Then finally, do

./run_ring creeper

The first command, passive, uses a linear eigensolver to find the passive poles near some given frequency, and then outputs them to MATLAB .m mode files. (The reason for the MATLAB format is that PETSc defaults to this.) These files are in general completely compatible with Julia, and can be read using the include command, as usual, provided that % characters (comments in MATLAB) are replaced with # characters (comments in Julia).

The second command, creeper, takes some given .m mode files and increments the pump strength to some given value, while solving the SALT equations for all of the intermediate pump strengths. In this case, it is incrementing the pump strength for passive (below-threshold) modes until it finds the threshold, and then it outputs the new mode files at the threshold pump strength. The creeper command is also be used to solve for lasing (above-threshold) modes, which we will discuss later.

Now we examine the main executable BASH script, run_ring, which contains all the parameters necessary to find the lasing mode for the 1d ring laser.

The first part of the file gives the geometrical specifications:

GEO="-Nc 1 -Nx 100 -Ny 1 -Nz 1
-Npmlx 0 -Npmly 0 -Npmlz 0 -LowerPML 1
-hx 0.01 -hy 0.1 -hz 0.1
-epsfile "eps_ring.txt" -epsIfile "epsI_ring.txt" -fproffile "f_ring.txt"
-wa 6.3 -gamma 1.0 -manual_epspml 0 -output_epstilde 0";

First, -Nc gives the number of components of the electric field. For TM-polarized modes, it is 1; for TE it is 2, and for fully vectorial fields it is 3. Next, -Nx, -Ny, and -Nz give the number of total pixels, including any perfectly matched layer (PML) pixels, which we will describe next. For 1d geometries, both -Ny and -Nz are set to 1, while for 2d geometries, -Nz is set to 1. The -Npml fields give the number of pixels of PML placed at the boundaries. Here, we have set all to zero, because in the 1d ring, loss is modelled with an imaginary part of the dielectric, which we will soon describe. The -LowerPML parameter determines whether to put a PML on both the upper and lower boundaries (if set to 1) or just the upper boundary (if set to 0). The -hx, -hy, and -hz parameters determine the width (in arbitrary length units) of a single pixel. Note that our code chooses the speed of light to be 1, so these h parameters also directly determine the frequency units for all the results. Additionally, note that we have set both -Ny and -Nz to 1, so the values of -hy and -hz can be chosen to be anything, and do not matter.

Next, we look at the input files. First, -epsfile must be set to an existing text file that has the values of real parts of the dielectric function at all N×Ny×Nz grid points. In our case, we simply have "1" repeated 100 times in eps_ring.txt, since our ring has a uniform dielectric with value unity. The next file is -epsIfile, which specifies the imaginary part of the dielectric. Here, we have a text file epsI_ring.txt which has "0.2" repeated 100 times, to simulate a uniform radiation loss. For cavities that use outgoing boundary conditions to model radiation loss more realistically, we would instead have '-Npml' to be nonzero, and the -epsIfile option can simply be omitted, which will result in the code taking the dielectric to be purely real. The last file option, -fproffile, gives the file for the gain profile. Here we again have all ones. This file, unlike -epsIfile, is not optional.

The remaining parameters in the block above are -wa and -gamma, which are the atomic gain frequency and relaxation the polarization rate from the SALT theory, respectively. Finally, -manualepspml and -output_epstilde are more advanced features, for manually providing a PML function (instead of the one computed from the -Npml parameters), and for outputting the total dielectric function for debugging purposes.

The next block of parameters, invoked when calling passive, is:

PASSIVE="-wreal 6.2 -wimag -0.6
-bx 1 -by -1 -bz 1
-kx 1e-15 -ky 0 -kz 0 -norm 0.01
-passiveout pass_ring -nev 2 -st_type sinvert"; 

The first line gives the guess for the pole when the passive command is used to find poles. The -nev parameter at the bottom gives, roughly, the number of eigenpairs to find. In this case, we are looking for poles near 6.2-0.6i, and we have told the eigensolver to save approximately two eigenpairs. The next set of parameters, -b, give the mirror boundary conditions. These are only relevant when the -LowerPML parameter is set to zero, when we only want to simulate half of the computational cell in each direction. In that case, setting -bx to -1 would impose odd mirror boundary conditions at the lower end in the x-direction. Other possibilities include 1 for even, and 0 for Dirichlet (zero field). In our case, however, we have set the -LowerPML parameter to 1 since we are trying to simulate the full cell, so all boundaries default to 0 (Dirichlet).

The next line contains -k, which are the Bloch wave vectors in all directions. These can be used, for example, to simulate lasers in periodic media such as photonic crystals. In our case, we have set the -kx wave vector to 1e-15, which is equivalent to having periodic boundary conditions in the x direction. The next parameter -norm, simply provides an overall scaling to the electric field eigenvector. Usually, this parameter need not be adjusted; it is only when numerical stability becomes an issue that any modifications to it are necessary. Finally, the last line contains the -passiveout parameter, which specifies the filename prefix for the output mode files when the passive command is used. For example, since we have set the value of this option to pass_ring, the output files when passive is used would be pass_ring0.m, pass_ring1.m, and so on.

The third block of parameters, used when calling creeper, is given by:

CREEPER="-in0 pass_ring0
-out0 thresh_ring
-dD 0.07 -Dmax -0.001 -output_deps 0
-newtonf_tol 1e-8 -reuse_lu 0 -printnewton 1";

Here, the -in0 and -out0 parameters give the filenames (without the extension), for the input modes and output modes. The input file needs to exist prior to calling creeper. The initial pump strength is automatically read from the input mode file. For a situation with multiple lasing modes, one can use -in1 and -out1 for a second lasing mode, and the same with a 2 suffix for a third lasing mode, and so on. The caveat is that all the input modes must be at the same pump strength, or else an error might occur.

The next line of parameters include -dD, which gives the pump strength increment for each solve of the SALT equation, and -Dmax, which gives the final desired pump strength when it is a positive number, and indicates that we would like to find a threshold if it is negative. The rest of parameters here are more advanced settings.

After running the two commands, ./run_ring passive and ./run_ring creeper listed above, we will end up with a file ./thres_ring_file.m, which is the mode exactly at threshold. We take a closer look at this file. The first variable in this file is psi, and it contains all the information about the mode. This psi variable always has Nx×Ny×Nz×Nc×2+2 elements. The first 2 in this expression comes from the fact that the field is complex and has real and imaginary components. The second 2 comes from the additional two variables, which are the real part of the frequency, and the imaginary part (if negative and the mode is below threshold) or the mode amplitude (if positive and above threshold). The remaining variables in the file are self-explanatory, with the exception of ifix, which is simply the position used to normalize and fix the phase of the mode, and can usually be ignored. For our threshold file, we see that the very last element of psi is indeed zero, which has been set explicitly by the creeper routine when the threshold was found to within a certain tolerance.

As a final step, we now want to take this threshold mode, and increase the pump strength even further so that starts lasing. To do so, we modify the CREEPER block of the BASH script to

CREEPER="-in0 thresh_ring -out0 lasing_ring -dD 0.07 -Dmax 0.4 -output_deps 0 -newtonf_tol 1e-8 -reuse_lu 0 -printnewton 1";

Note that we have moved the thresh_ring value from -out0 to -in0, because we now want to use the existing file as an input. From this file, we can see the threshold is at approxiately D=0.200024003819003;. Hence, we choose -Dmax to be about twice this, and then do

`./run_ring creeper`

The lasing mode at pump strength D = 0.4 is then output into the file lasing_ring_file.m.

About

SALT (steady-state ab-initio laser theory) solver package for Julia

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages