OpenVPN 3 is a C++ class library that implements the functionality of an OpenVPN client, and is protocol-compatible with the OpenVPN 2.x branch.
OpenVPN 3 includes a minimal client wrapper (cli
) that links in with
the library and provides basic command line functionality.
OpenVPN 3 is currently used in production as the core of the OpenVPN Connect clients for iOS, Android, Linux, Windows, and Mac OS X.
NOTE: As of 2017, OpenVPN 3 is primarily of interest to developers, as it does not yet replicate the full functionality of OpenVPN 2.x. In particular, server functionality is not yet implemented.
Table of Contents
OpenVPN 3 is organized as a C++ class library, and the API is defined in client/ovpncli.hpp.
A simple command-line wrapper for the API is provided in test/ovpncli/cli.cpp.
These instructions were tested on Ubuntu 16.
Get prerequisites to allow for either mbedTLS or OpenSSL linkage:
$ sudo apt-get install g++ make libmbedtls-dev libssl-dev liblz4-dev
Get Asio C++ library:
$ cd ~ $ git clone https://github.com/chriskohlhoff/asio.git
Set environmental variable used by OpenVPN 3 build scripts:
$ export O3=~/ovpn3
Clone the OpenVPN 3 source repo:
$ mkdir ~/ovpn3 $ cd ~/ovpn3 $ git clone https://github.com/OpenVPN/openvpn3.git core
Build the OpenVPN 3 client wrapper (cli) with mbedTLS crypto/ssl library and LZ4 compression:
$ cd $O3/core/test/ovpncli $ ECHO=1 PROF=linux ASIO_DIR=~/asio MTLS_SYS=1 LZ4_SYS=1 NOSSL=1 $O3/core/scripts/build cli
Or alternatively build with OpenSSL:
$ cd $O3/core/test/ovpncli $ ECHO=1 PROF=linux ASIO_DIR=~/asio OPENSSL_SYS=1 LZ4_SYS=1 $O3/core/scripts/build cli
Run OpenVPN 3 client:
$ sudo ./cli -a -c yes myprofile.ovpn route-nopull
Options used:
-a : use autologin sessions, if supported -c yes : negotiate LZ4 compression myprofile.ovpn : OpenVPN config file (must have .ovpn extension) route-nopull : if you are connected via ssh, prevent ssh session lockout
OpenVPN 3 should be built in a non-root Mac OS X account. Make sure that Xcode is installed with optional command-line tools. (These instructions have been tested with Xcode 5.1.1).
Create the directories ~/src
and ~/src/mac
:
$ mkdir -p ~/src/mac
Clone the OpenVPN 3 repo:
$ cd ~/src $ mkdir ovpn3 $ cd ovpn3 $ git clone https://github.com/OpenVPN/openvpn3.git core
Export the shell variable O3
to point to the OpenVPN 3 top level
directory:
export O3=~/src/ovpn3
Download source tarballs (.tar.gz
or .tgz
) for these dependency
libraries into ~/Downloads
See the file $O3/core/deps/lib-versions
for the expected
version numbers of each dependency. If you want to use a different
version of the library than listed here, you can edit this file.
- Asio — https://github.com/chriskohlhoff/asio
- mbed TLS (2.3.0 or higher) — https://tls.mbed.org/
- LZ4 — https://github.com/Cyan4973/lz4
For dependencies that are typically cloned from github vs.
provided as a .tar.gz file, tools are provided to convert
the github to a .tar.gz file. See "snapshot" scripts under
$O3/core/deps
Note that while OpenSSL is listed in lib-versions, it is not required for Mac builds.
Build the dependencies:
$ OSX_ONLY=1 $O3/core/scripts/mac/build-all
Now build the OpenVPN 3 client executable:
$ cd $O3/core $ . vars/vars-osx64 $ . vars/setpath $ cd test/ovpncli $ MTLS=1 LZ4=1 build cli
This will build the OpenVPN 3 client library with a small client
wrapper (cli
). It will also statically link in all external
dependencies (Asio, mbedTLS, and LZ4), so cli
may be distributed
to other Macs and will run as a standalone executable.
These build scripts will create a x86_x64 Mac OS X executable, with a minimum deployment target of 10.8.x. The Mac OS X tuntap driver is not required, as OpenVPN 3 can use the integrated utun interface if available.
To view the client wrapper options:
$ ./cli -h
To connect:
$ ./cli client.ovpn
Prerequisites:
- Visual Studio 2017
- Python 2.7
Clone the OpenVPN 3 source repo:
> c:\Temp>mkdir O3 > c:\Temp>cd O3 > c:\Temp\O3>git clone https://github.com/OpenVPN/openvpn3.git core
Download and build dependencies:
> c:\Temp\O3>cd core\win > c:\Temp\O3\core\win>set O3=C:\Temp\O3 && python buildep.py
Build test client:
> c:\Temp\O3\core\win>set O3=C:\Temp\O3 && python build.py
Visual Studio 2015 project and solution files are located in O3\core\win
directory.
Before opening project you need to build dependencies and define OVPN3_ROOT
environmental variable (C:\Temp\O3
from example above).
The OpenVPN 3 core includes a stress/performance test of the OpenVPN protocol implementation. The test basically creates a virtualized lossy network between two OpenVPN protocol objects, triggers TLS negotiations between them, passes control/data channel messages, and measures the ability of the OpenVPN protocol objects to perform and remain in a valid state.
The OpenVPN protocol implementation that is being tested is here: openvpn/ssl/proto.hpp
The test code itself is here: test/ssl/proto.cpp
Build the test:
$ cd ovpn3/core/test/ssl $ ECHO=1 PROF=linux ASIO_DIR=~/asio MTLS_SYS=1 NOSSL=1 $O3/core/scripts/build proto
Run the test:
$ time ./proto *** app bytes=72777936 net_bytes=122972447 data_bytes=415892854 prog=0000216599/0000216598 D=12700/600/12700/600 N=109/109 SH=17400/15300 HE=0/0 real 0m15.813s user 0m15.800s sys 0m0.004s
The OpenVPN 3 core also includes unit tests, which are based on Google Test framework. To run unit tests, you need to install CMake and build Google Test.
Building Google Test on Linux:
$ git clone https://github.com/google/googletest.git $ cd googletest $ cmake . && cmake --build .
Building Google Test on Windows:
> git clone https://github.com/google/googletest.git > cd googletest > cmake -G "Visual Studio 14 2015 Win64" . > cmake --build .
After Google Test is built you are ready to build and run unit tests.
Build and run tests on Linux:
$ cd ovpn3/core/test/unittests $ GTEST_DIR=~/googletest ECHO=1 PROF=linux ASIO_DIR=~/asio MTLS_SYS=1 LZ4_SYS=1 NOSSL=1 $O3/core/scripts/build test_log $ ./test_log
Build and run tests on Windows:
$ cd ovpn3/core/win $ python build.py ../test/unittests/test_log.cpp unittest $ test_log.exe
OpenVPN 3 is written in C++11 and developers who are moving from C to C++ should take some time to familiarize themselves with key C++ design patterns such as RAII:
https://en.wikipedia.org/wiki/Resource_acquisition_is_initialization
OpenVPN 3 is designed as a class library, with an API that
is essentially defined inside of namespace ClientAPI
with headers and implementation in client and
header-only library files under openvpn.
The consise definition of the client API is essentially class OpenVPNClient
in client/ovpncli.hpp with several imporant extensions to
the API found in:
- class TunBuilderBase in openvpn/tun/builder/base.hpp — Provides an abstraction layer defining the tun interface, and is especially useful for interfacing with an OS-layer VPN API.
- class ExternalPKIBase in openvpn/pki/epkibase.hpp — Provides a callback for external private key operations, and is useful for interfacing with an OS-layer Keychain such as the Keychain on iOS, Mac OS X, and Android, and the Crypto API on Windows.
- class LogReceiver in client/ovpncli.hpp — Provides an abstraction layer for the delivery of logging messages.
OpenVPN 3 includes a command-line reference client (cli
) for
testing the API. See test/ovpncli/cli.cpp.
The basic approach to building an OpenVPN 3 client is
to define a client class that derives from
ClientAPI::OpenVPNClient
, then provide implementations
for callbacks including event and logging notifications:
class Client : public ClientAPI::OpenVPNClient
{
public:
virtual void event(const Event&) override { // events delivered here
...
}
virtual void log(const LogInfo&) override { // logging delivered here
...
}
...
};
To start the client, first create a ClientAPI::Config
object
and initialize it with the OpenVPN config file and other options:
ClientAPI::Config config;
config.content = <config_file_content_as_multiline_string>;
...
Next, create a client object and evaluate the configuration:
Client client;
ClientAPI::EvalConfig eval = client.eval_config(config);
if (eval.error)
throw ...;
Finally, in a new worker thread, start the connection:
ClientAPI::Status connect_status = client.connect();
Note that client.connect()
will not return until
the session has terminated.
The top layer of the OpenVPN 3 client is implemented in test/ovpncli/cli.cpp and openvpn/client/cliopt.hpp. Most of what this code does is marshalling the configuration and dispatching the higher-level objects that implement the OpenVPN client session.
class ClientConnect
in openvpn/client/cliconnect.hpp
implements the top-level connection logic for an OpenVPN client
connection. It is concerned with starting, stopping, pausing, and resuming
OpenVPN client connections. It deals with retrying a connection and handles
the connection timeout. It also deals with connection exceptions and understands
the difference between an exception that should halt any further reconnection
attempts (such as AUTH_FAILED
), and other exceptions such as network errors
that would justify a retry.
Some of the methods in the class
(such as stop
, pause
, and reconnect
) are often
called by another thread that is controlling the connection, therefore
thread-safe methods are provided where the thread-safe function posts a message
to the actual connection thread.
In an OpenVPN client connection, the following object stack would be used:
- class ClientConnect in openvpn/client/cliconnect.hpp — The top-layer object in an OpenVPN client connection.
- class ClientProto::Session in openvpn/client/cliproto.hpp — The OpenVPN client protocol object that subinstantiates the transport and tun layer objects.
- class ProtoContext in openvpn/ssl/proto.hpp — The core OpenVPN protocol implementation that is common to both client and server.
- class ProtoStackBase<Packet> in openvpn/ssl/protostack.hpp — The bottom-layer class that implements the basic functionality of tunneling a protocol over a reliable or unreliable transport layer, but isn't specific to OpenVPN per-se.
OpenVPN 3 defines abstract base classes for Transport layer implementations in openvpn/transport/client/transbase.hpp.
Currently, transport layer implementations are provided for:
- UDP — openvpn/transport/client/udpcli.hpp
- TCP — openvpn/transport/client/tcpcli.hpp
- HTTP Proxy — openvpn/transport/client/httpcli.hpp
OpenVPN 3 defines abstract base classes for Tun layer implementations in openvpn/tun/client/tunbase.hpp.
There are two possible approaches to define a Tun layer implementation:
Use a VPN API-centric model (such as for Android or iOS). These models derive from class TunBuilderBase in openvpn/tun/builder/base.hpp
Use an OS-specific model such as:
- Linux — openvpn/tun/linux/client/tuncli.hpp
- Windows — openvpn/tun/win/client/tuncli.hpp
- Mac OS X — openvpn/tun/mac/client/tuncli.hpp
The OpenVPN protocol is implemented in class ProtoContext in openvpn/ssl/proto.hpp.
The parsing and query of the OpenVPN config file
is implemented by class OptionList
in
openvpn/common/options.hpp.
Note that OpenVPN 3 always assumes an inline style of configuration, where all certs, keys, etc. are defined inline rather than through an external file reference.
For config files that do use external file references,
class ProfileMerge
in openvpn/options/merge.hpp
is provided to merge those external
file references into an inline form.
The OpenVPN 3 client API, as defined by class OpenVPNClient
in client/ovpncli.hpp, can be wrapped by the
Swig tool to create bindings for other languages.
For example, OpenVPN Connect for Android creates a Java binding of the API using javacli/ovpncli.i.
When developing security software in C++, it's very important to take advantage of the language and OpenVPN library code to insulate code from the kinds of bugs that can introduce security vulnerabilities.
Here is a brief set of guidelines:
When dealing with strings, use a
std::string
rather than achar *
.When dealing with binary data or buffers, always try to use a
Buffer
,ConstBuffer
,BufferAllocated
, orBufferPtr
object to provide managed access to the buffer, to protect against security bugs that arise when using raw buffer pointers. See openvpn/buffer/buffer.hpp for the OpenVPNBuffer
classes.When it's necessary to have a pointer to an object, use
std::unique_ptr<>
for non-shared objects and reference-counted smart pointers for shared objects. For shared-pointers, OpenVPN code should use the smart pointer classes defined in openvpn/common/rc.hpp. Please see the comments in this file for documentation.Never use
malloc
orfree
. When allocating objects, use the C++new
operator and then immediately construct a smart pointer to reference the object:std::unique_ptr<MyObject> ptr = new MyObject(); ptr->method();
When interfacing with C functions that deal with raw pointers, memory allocation, etc., consider wrapping the functionality in C++. For an example, see
enum_dir()
in openvpn/common/enumdir.hpp, a function that returns a list of files in a directory (Unix only) via a high-level string vector, while internally calling the low level libc methodsopendir
,readdir
, andclosedir
. Notice howunique_ptr_del
is used to wrap theDIR
struct in a smart pointer with a custom deletion function.When grabbing random entropy that is to be used for cryptographic purposes (i.e. for keys, tokens, etc.), always ensure that the RNG is crypto-grade by calling
assert_crypto()
on the RNG. This will throw an exception if the RNG is not crypto-grade:void set_rng(RandomAPI::Ptr rng_arg) { rng_arg->assert_crypto(); rng = std::move(rng_arg); }
Any variable whose value is not expected to change should be declared
const
.Don't use non-const global or static variables unless absolutely necessary.
When formatting strings, don't use
snprintf
. Instead, usestd::ostringstream
or build the string using the '+'std::string
operator:std::string format_reconnecting(const int n_seconds) { return "Reconnecting in " + openvpn::to_string(n_seconds) + " seconds."; }
or:
std::string format_reconnecting(const int n_seconds) { std::ostringstream os; os << "Reconnecting in " << n_seconds << " seconds."; return os.str(); }
OpenVPN 3 is a "header-only" library, therefore all free functions outside of classes should have the
inline
attribute.
Use the Asio library for I/O and timers. Don't deal with sockets directly.
Never block. If you need to wait for something, use Asio timers or sockets.
Use the
OPENVPN_LOG()
macro to log stuff. Don't useprintf
.Don't call crypto/ssl libraries directly. Instead use the abstraction layers (openvpn/crypto and openvpn/ssl) that allow OpenVPN to link with different crypto/ssl libraries (such as OpenSSL or mbed TLS).
Use
RandomAPI
as a wrapper for random number generators (openvpn/random/randapi.hpp).If you need to deal with configuration file options, see
class OptionList
in openvpn/common/options.hpp.If you need to deal with time or time durations, use the classes under openvpn/time.
If you need to deal with IP addresses, see the comprehensive classes under openvpn/addr.
In general, if you need a general-purpose library class or function, look under openvpn/common. Chances are good that it's already been implemented.
The OpenVPN 3 approach to errors is to count them, rather than unconditionally log them. If you need to add a new error counter, see openvpn/error/error.hpp.
If you need to create a new event type which can be transmitted as a notification back to the client API user, see openvpn/client/clievent.hpp.
Raw pointers or references can be okay when used by an object to point back to its parent (or container), if you can guarantee that the object will not outlive its parent. Backreferences to a parent object is also a common use case for weak pointers.
Use C++ exceptions for error handling and as an alternative to
goto
. See OpenVPN's general exception classes and macros in openvpn/common/exception.hpp.Use C++ destructors for automatic object cleanup, and so that thrown exceptions will not leak objects. Alternatively, use
Cleanup
in openvpn/common/cleanup.hpp when you need to specify a code block to execute prior to scope exit. For example, ensure that the filepid_fn
is deleted before scope exit:auto clean = Cleanup([pid_fn]() { if (pid_fn) ::unlink(pid_fn); });
When calling global methods (such as libc
fork
), prepend "::" to the symbol name, e.g.:struct dirent *e; while ((e = ::readdir(dir.get())) != nullptr) { ... }
Use
nullptr
instead ofNULL
.
The OpenVPN 3 client core is designed to run in a single thread, with the UI or controller driving the OpenVPN API running in a different thread.
It's almost never necessary to create additional threads within the OpenVPN 3 client core.
See CONTRIBUTING.rst.
See LICENSE.rst.