-
Notifications
You must be signed in to change notification settings - Fork 11
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Volume Settings sets volume in GUI but not on actual audio output #24
Comments
This is odd @EpicLPer I can't replicate this. Is it sill an issue? |
Heya, not sure what happened when I tested this back then but it now seems to work again. However I noticed another issue, when you set a manual minimum volume limit via the web interface (in my case I set it to 70%) and then adjust it via Home Assistant it seems to ignore that low limit. In Spotify and the Web Interface turning the volume down to 50% as example still has audible music playing, where as via the Home Assistant addon it is completely silent as it was before I set that limit. It seems to not respect the low limit and "hard sets" it regardless on the audio DAC. |
Yes I think via the API you can override the limits in HiFi berry OS. you could setup an intermediary slider in home assistant with a constrained range
On 14 Apr 2024 at 12:55 +0100, EpicLPer ***@***.***>, wrote:
Heya, not sure what happened when I tested this back then but it now seems to work again.
However I noticed another issue, when you set a manual minimum volume limit via the web interface (in my case I set it to 70%) and then adjust it via Home Assistant it seems to ignore that low limit. In Spotify and the Web Interface turning the volume down to 50% as example still has audible music playing, where as via the Home Assistant addon it is completely silent as it was before I set that limit. It seems to not respect the low limit and "hard sets" it regardless on the audio DAC.
Not sure if I should open another issue for this.
—
Reply to this email directly, view it on GitHub<#24 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABGKGPFHHLDEP2UPAHU6S23Y5JVBNAVCNFSM6AAAAAAVIFJINSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJUGAZDGNZSGA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Heya!
So this may be a weird behavior, and I'm not even sure if it's the cause of this integration or HiFiBerryOS itself, but when I set the Volume via Home Assistant it only updates it on the Web GUI of HiFiBerryOS, but the actual audio output is unaffected by it and stays at the same volume as it was before. If I use the slider on the Web GUI it works without any issues.
That said, if I use the slider on the Web GUI it doesn't update the slider on Home Assistant, so it seems to only be One-Way so far.
The text was updated successfully, but these errors were encountered: