Update install.sh for rbfeeder

[vatprcyq]

tar1090 for rbfeeder aircraft.json location update

[wiedehopf]

Does their default setup open port 30005 for others to use the data?

[vatprcyq]

Does their default setup open port 30005 for others to use the data?
Port number is different
Basestation at port 32459 and Beast port 32457
But access restricted localhost only
Can use socat or nc to forward port for other in LAN

[wiedehopf]

Why would the not open the default ports of the project they forked?
localhost restriction is fine, not opening the default ports is ridiculous.

I won't support them until that is changed.

[wiedehopf]

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder.
https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

[vatprcyq]

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder. https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

OK change to readsb now,use network mode for rbfeeder

[vatprcyq]

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder. https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

readsb can decode MCP select ALT ,rbfeeder can't do this now