Popular repositories Loading
-
Stealthburner-Dual-channel-Filament-Cutter
Stealthburner-Dual-channel-Filament-Cutter Public我设想了一个双通道多色3D打印机头方案,当3D打印机工作时双通道系统使得一通道内的耗材始终属于待机状态,而另一个通道内的耗材在滑动。此时由于双通道的存在,则不需要像单通道那样进行长距离的缩回耗材动作, 以此来缩短换色过程中抽取和送料的时间来达到增加多色3D打印的工作速度。这个方案目前已经接近完成,我希望能有更多的参与者来一起挖掘这个方案的可能性
-
Nevermore_Micro
Nevermore_Micro PublicForked from nevermore3d/Nevermore_Micro
Activated Carbon Filters. Bad smells or fumes, or complaints thereof, should not keep you from being a maker!
-
SuperSlicer
SuperSlicer PublicForked from supermerill/SuperSlicer
G-code generator for 3D printers (Prusa, Voron, Creality, etc.)
C++
-
-
BambuStudio-SoftFever
BambuStudio-SoftFever PublicForked from SoftFever/OrcaSlicer
PC Software for BambuLab's 3D printers
C++
-
3D-Print-consumables-box
3D-Print-consumables-box Public根据市面上常用4L米桶和小米温度计去适配的一个3D打印耗材的支架,针对了FDM打印特性的优化确保完好的打印效果
Something went wrong, please refresh the page to try again.
If the problem persists, check the GitHub status page or contact support.
If the problem persists, check the GitHub status page or contact support.