Scripts for various things

See router/lan/local_hosts for a listing of ips & hosts

These scripts are written specifically for using joey as the router

Setup instructions can be found at vtluug.org/rtfm.txt

Configuration for VTLUUG's router (joey.vtluug.org). ARP/NDP Proxy are required due to port security. Dnsmasq is used for DHCP on our private network and provides SLAAC (+ PTR records???) using the ra-only mode.

• router/ip-config
  • typical /etc/network/interfaces config for the router
• router/ipsec
  • ipsec configuration (TODO)
• router/iptables
  • Router iptables rules
• router/lan
  • dnsmasq & nat configuration
• router/proxy
  • arp proxying
• router/sysctl.conf
  • sysctl settings for enabling IPv6 privacy extensions and forwarding

Sets up the bridge interfaces on new libvirt hosts. This should be the first thing done after a new installation.

Make sure you change $INTERFACE the interface that is being bridged.

Wiki, website, and other scripts for automating things.

These files are for flashing a Dell H200 raid controller to HBA mode, which enables it to be a "dumb" adapter and not use Dell's typical fimware.