Simple binds for using a 65%/60% keyboard and a mouse with 4 side buttons.

Most binds are left as default, with a few changes to make it easier for those with non-standard layouts). Of course, binds will still work on any keyboard regardless of form factor, just be sure to check your board's manual/key locations for anything smaller than 65%.

1. Download and install SC Launch Configurator
2. Download Sq65 Binds.profiles in repo
3. Open SC Launch Configurator
4. Launch Star Citizen to confirm your profile is generated, then close Star Citizen
5. In SC Launch Configurator, go to "Profile" and BACKUP/EXPORT YOUR PROFILE
6. Import Sq65 Binds.profiles and install by clicking the "LIVE" button to the right

If you change your binds/settings in-game, you can update and backup your new profile in the SC Launch Configurator.

This profile is specific to my CFG/build, as I play on UW QHD. You may run the game with different settings in other menus (i.e. General, Audio, Graphics, etc). Please back up your settings before importing mine (see step 6 above). If your game does not launch due to errors in rendering/resolution, review your graphics settings either in-game or in the SC Launch Configurator.

Based on Logitech GPW, but it can be remapped to your mouse buttons if need be.

• Mouse Button 5 Weapon Power (Tap to +, Hold to Max)
• Mouse Button 4 Shield Power (Tap to +, Hold to Max)
• F8 Engine Power (Tap to +, Hold to Max)
• F5 Reset Power

Swapped Freelook and Third Person binds, as function keys are more difficult/cumbersome to reach without a dedicated function row.

• Z Third Person
• F4 Freelook

• Z + , Hold to Save Camera 1 // Tap to Load Camera 1
• Z + . Hold to Save Camera 2 // Tap to Load Camera 2
• Z + / Hold to Save Camera 3 // Tap to Load Camera 3
• Z + ; Hold to Save Camera 4 // Tap to Load Camera 4
• Z + ' Hold to Save Camera 5 // Tap to Load Camera 5
• Z + Home
• Z + -(Minus) Decrease DoF
• Z + =(Equals) Increase DoF
• Z + UpArrow Camera Pan Y axis (Forward)
• Z + DownArrow Camera Pan Y axis (Backward)
• Z + LeftArrow Camera Pan X axis (Left)
• Z + RightArrow Camera Pan X axis (Right)
• Z + PgUp Camera Pan Z axis (Up)
• Z + PgDn Camera Pan Z axis (Down)
• Z + Del Reset Camera Position

• Choopa @ RSI Community Hub for SC Launch Configurator (2.0 Update linked here)