A Open Source SCADA System with HTML5 HMI, build using the Django framework. If you like to setup your own SCADA system head over to https://pyscada.rtfd.io.

• HTML5 based HMI
• Supports the following

• industrial Protocols

• Modbus TCP/IP - RTU - ASCII - Binary (using pyModbus)
• Phant (see https://phant.io/)
• VISA (using pyVISA)
• 1-Wire
• BACNet/IP (in development) (using BACpypes and BAC0)
• MeterBus (MBus) (in development) (using pyMeterBus)
• SMBus (using smbus2)
• GPIO (using RPi.GPIO)
• SystemStat
• OPC-UA (using opcua-asyncio)
• SML (Smart Meter Language) (using pySML)
• File read/write
• Serial
• WebService

• devices

• Generic dummy device
• PT104 (using Pico PT-104)

• scripts

• Scripting

• system tools

• EMS

• event management, data export, mail notification

• very low Hardware requirements for the server

• core/HMI

  • python>=3.8
  • django==4.2
  • numpy>=1.6.0
  • pillow
  • python-daemon

• Modbus TCP/RTU/BIN
• Visa (at least for the devices in the visa/devices folder)
• Systemstat
• OneWire (only DS18B20)
• phant (no known issues)
• smbus (at least for the devices in the smbus/devices folder)
• gpio (at least for the raspberry pi)
• webservice (json and xml parsing)
• systemstat
• scripting
• event (no known issues)
• export (no known issues)
• hmi (no known issues)

• Documentation
• SysV init daemon handling
• BACNet (due to the lack of hardware to test)
• OPC-UA (need more tests)
• MeterBus (need more tests)

Detailed installation instruction can be found at: https://pyscada.rtfd.io .

• Issue Tracker: https://github.com/pyscada/PyScada/issues
• Source Code: https://github.com/pyscada/PyScada

The project is licensed under the _GNU Affero General Public License v3 (AGPLv3).