scsi: sd: Do not repeat the starting disk message

The SCSI disk message "Starting disk" to signal resuming of a suspended
disk is printed in both sd_resume() and sd_resume_common() which results
in this message being printed twice when resuming from e.g. autosuspend:

$ echo 5000 > /sys/block/sda/device/power/autosuspend_delay_ms
$ echo auto > /sys/block/sda/device/power/control

[ 4962.438293] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4962.501121] sd 0:0:0:0: [sda] Stopping disk

$ echo on > /sys/block/sda/device/power/control

[ 4972.805851] sd 0:0:0:0: [sda] Starting disk
[ 4980.558806] sd 0:0:0:0: [sda] Starting disk

Fix this double print by removing the call to sd_printk() from sd_resume()
and moving the call to sd_printk() in sd_resume_common() earlier in the
function, before the check using sd_do_start_stop().  Doing so, the message
is printed once regardless if sd_resume_common() actually executes
sd_start_stop_device() (i.e. SCSI device case) or not (libsas and libata
managed ATA devices case).

Fixes: 0c76106 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

drivers/scsi/sd.c

@@ -4117,8 +4117,6 @@ static int sd_resume(struct device *dev)
 {
  struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
- sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
-
  if (opal_unlock_from_suspend(sdkp->opal_dev)) {
  sd_printk(KERN_NOTICE, sdkp, "OPAL unlock failed\n");
  return -EIO;
@@ -4135,12 +4133,13 @@ static int sd_resume_common(struct device *dev, bool runtime)
  if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
  return 0;
 
+ sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
+
  if (!sd_do_start_stop(sdkp->device, runtime)) {
  sdkp->suspended = false;
  return 0;
  }
 
- sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
  ret = sd_start_stop_device(sdkp, 1);
  if (!ret) {
  sd_resume(dev);