Finds every I2C device on the bus.

The Repo contains KiCAD hardware files and software for Morph Watch

Simple HAL driver for ILI9341 320x240 TFT LCD for STM32 microcontrollers

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

STM32 based project on Person and Tone Identification

This repository is made up of different branches that reflect the use of different peripherals on a STM32L476RG microcontroller

Example for NUCLEO-L476RG how to use bno08x-rvc lib to receive data from the BNO08x sensor (BNO080/85/86) in RVC mode.

STM32 based oscilloscope, AiR 6 sem PWR

Deskovery bot firmware

MPU6050 (GY-521) Driver for STM32 with Motion and Zero-Motion Detection

Game about choosing the right combination of 6 characters.

Signal generator core for Nucleo-L476RG board

Some Arm Assembly Code for Stm32-M4 board/cpu and a project with RedBlocks used for simulation . Programs used Keil uVision(IDE), RedBlocks Simulator. In latest projects I used STM32CUBEMX too

450 Real-Time Embedded Systems control code

A program for the STM32L476RG microcontroller sending device rotation data to the computer. The device acts as a controller for a game "Ścigałka".

Simple STM32 projects, AiR 6 sem PWR

It contains examples and experiments about riot-os

Example for SSD1306 OLED display written for STM32L476RG MCU, which shows whatever you want on OLED display.

This project interfaces an RGB LED module with a GPIO Pins on an STM32 Nucleo Board. The RGB LED module consists of individual LEDs for red, green, and blue, each controlled independently. PWM signals with varying duty cycles are generated using STM32's Timer peripherals to control the brightness of each LED.