This allows you to configure your complete NSPanel via Blueprint with UI and without changing anything in the code
-
Updated
Jun 21, 2024 - C++
Home Assistant is an open source home automation system that puts local control and privacy first. It is powered by a worldwide community of tinkerers and DIY enthusiasts, perfectly suited to run on a Raspberry Pi or a local server.
This allows you to configure your complete NSPanel via Blueprint with UI and without changing anything in the code
LCD touchscreen for Home Automation
HomeAutomation Switchplate based on lvgl for ESP32
Hardware & Software documentation for the CircuitSetup Expandable 6 Channel ESP32 Energy Meter. Works with ESPHome and Home Assistant.
ArduinoHA allows to integrate an Arduino/ESP based device with Home Assistant using MQTT.
(OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too!
ESP8266 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps
A simple DIY status display with a 8x32 RGB LED matrix, implemented with esphome.io and Home Assistant.
A collection of my ESPHome components
A simple DIY status display with an 8x32 RGB LED panel implemented with esphome.io and Home Assistant
ESPHome components which implement a Philips Series 2200/3200 Coffee Machine into HomeAssistant. Capable of brewing automatic coffee.
A ESP8266 devkit firmware for the Nodoshop version of the Opentherm Gateway (OTGW)
ESPHome component for NSPanel Lovelace UI
OpenTherm gateway for HomeAssistant
Room presence detection using mmWave radar (DFRobot SEN0395), D1 Mini ESP-8266 and ESPHome for HomeAssistant
Hugo is a 4-button ESP8266 Wi-Fi Remote, Arduino compatible and simple to use.
A collection of ESPHome custom components, configuration files, and custom code for my various ESP8266/ESP32 devices that integrate with Home Assistant.
Flexible, Arduino Mega/Due/ESP8266/ESP32/STM32 based SmartHome controller with DMX-512 in/out, 1-Wire, Modbus, MQTT interfaces. OpenHab/HomeAssistant/ioBroker compatible.