D3vil Design's K1 and K1 Max Hardware Modifications

A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.

This is optimized firmware for Voxelab Aquila & Ender3 V2/S1 3D printers.

A guide to install Octoprint on the Creality WiFi Box or similar OpenWrt devices

Hardware design files for creating a custom enclosure for an Ender3 v2 3D printer

This is a guide that address initial setup and possible issues you may encounter while using this machine. Basically a repository of information from across the web, that has been tested and confirmed as a valid. Also contains information Not specific to the Ener series of machines (ie motor, nozzles, and other tips and tricks

Some recipies for setting up a Creality Ender 3 S1 Pro 3D printer with Cura 4.13.0

A step by step guide to install OctoPrint on the OrangePi PC (and on any arm single board computer)

A python script to load and automatically fit pre-sliced gcode onto the build plate of an FDM 3D printer

Firmware mainly for Voxelab Aquila or Creality Ender w/ 4.2.7 board or G32/N32 chips

ender 3 and ender 5 Configs

Configuration of Marlin 1.1.x for Creality CR10 with mesh bed leveling & BLtouch

Marlin configuration for Ender 3 Max with CR Touch/BL Touch.

Klipper config backup - CR-10v3 w/ SKR Mini E3

This project allows to use the JyersUI branch of Marlin on a modified Ender-3 Max printer

Klipper Configuration files for a Creality Cr10 v1 with Bltouch and filament sensor

Your one-stop-shop for everything related to Ender 3 V3 SE, but better!

Extruder E-steps & FlowRate Calculator by VASKE is easy tool to correct the STEPS/MM of your 3D Printer especially in case if you doing upgrade from Bowden tube to Direct Drive and fix FlowRate

All-in-One Marlin firmware for your 32-bit Creality Ender-3!