Python cross-platform script to upload firmware via the serial boot loader onto the CC13xx, CC2538 and CC26xx SoC.

UAT (ADS-B 978) test signal generator

Component data sheets, busbars and files needed to build no-weld BMS DKblock style battery packs. Here is a YouTube video, courtesy of Nick Jobbitt of a 10 block build, sped up: https://www.youtube.com/watch?v=V05_WOhEqQg&feature=youtu.be ................ DKblock2 parts available on ebay search "DKblock

PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module

CC1310 FreeRTOS Blink

This repo contains design files for cc1310 based mote platform that is XBee pin compatible.

Arduino RF EBYTE E70 CC1310 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards)..

CC1310 Simple FreeRTOS Radio functionality.

CC1310 Simple Radio functionality.

J-Link script file to perform full chip erase of the TI CC13x0/CC26x0 devices

Boilerplate for using non-volatile storage (NVS) driver to read and write data to on-chip flash memory | TI SimpleLink MCU

CC1310 3-Axis Solar Power Asset Tracker example

CC1310 3-Axis Sub-G Motion Tracker example

CC1310 6-Axis Solar Power Asset Tracker example

CC1310 6-Axis Sub-G Motion Tracker example

Cross-platfrom embedded toolchain support with using cmake for TI CC Series Microcontrollers (MCUs) & processors