Hoymiles Zero Export is a Python script for managing the power of the Hoymiles inverters to reduce the amount of the generated power to the grid. Based on the current power output, the script can automatically adjust the export limit of the inverter, allowing for optimal energy management.

Before running this script make sure you have a powermeter which outputs a negative power value in case of returning to the grid. For example: the Holley DTZ541 shows -150W if the solar inverter is overproducing. This script does not use MQTT, it's based on webapi communication.

• Tasmota Smart Meter Interface (e.g. "Hichi IR Lesekopf" or equal)
• Shelly EM, Shelly 3EM, Shelly 3EM Pro, Shelly 1PM, Shelly Plus 1PM
• SHRDZM Smartmeter Modul
• Emlog ("electronic meter log")
• ioBroker with simpleAPI
• HomeAssistant
• Volkszaehler (VZLogger)
• ESPHome
• Mitterbaur Amis IR Reader
• shell script based interface
• easy to implement new smart meter modules supporting WebAPI / JSON

• Ahoy - this script is developed with AHOY and therefore i recommend it
• OpenDTU
• Hoymiles MI, HM, HMS and HMT-Series Inverter (--> all inverters that are supported by AHOY / OpenDTU)
• Note: The Hoymiles inverters with a build-in DTU, like the HMS-xxxxW Series, are not supported!

You can set various limits to support battery powered Hoymiles Inverters

• power-off limit
• limit reduction if battery voltage drops
• auto-power-on if battery voltage rises

Make sure you have Python 3.8 or greater installed:

python3 --version

if you don´t have python installed or an older version is on your machine, then install or upgrade it

Get the code and unpack the archive:

wget https://github.com/reserve85/HoymilesZeroExport/archive/refs/heads/main.zip
unzip main.zip
rm main.zip
mv HoymilesZeroExport-main/ HoymilesZeroExport/
cd HoymilesZeroExport/

Launch installscript to create zero export service

sudo chmod +x install.sh
sudo ./install.sh

Define your configuration: edit HoymilesZeroExport_Config_Override.ini. You need to provide a configuration where you override individual values. To do that edit HoymilesZeroExport_Config_Override.ini and set the configuration values from HoymilesZeroExport_Config.ini you'd like to override.

sudo nano HoymilesZeroExport_Config_Override.ini

The minimum content for using AhoyDTU with a Tasmota powermeter looks like this:

[SELECT_DTU]
USE_AHOY = true

[SELECT_POWERMETER]
USE_TASMOTA = true

[AHOY_DTU]
AHOY_IP = 192.168.10.57

[TASMOTA]
TASMOTA_IP = 192.168.10.90
...

Save with ctrl + s, exit with ctrl + x

You can also edit the default configuration, but i recommend the procedure described above (Configuration Variant A:)

sudo nano HoymilesZeroExport_Config.ini

save with ctrl + s, exit with ctrl + x

Restart the service after modified configuration or script

sudo ./restart.sh

View the output log

sudo journalctl -u HoymilesZeroExport.service -n 20000 -e -f

If you really don´t want the service anymore, just uninstall it

sudo ./uninstall_service.sh

If you want to update the script to the latest version on Github:

sudo chmod +x update.sh
sudo ./update.sh

Get Python 3 (download is available at https://www.python.org/) and then install the module "requests" and "packaging":

pip3 install -r requirements.txt

Now you can execute the script with python.

By default the Docker image uses a base configuration in HoymilesZeroExport_Config.ini. You need to provide a configuration where you override individual values. To do that, create a new HoymilesZeroExport_Config_Override.ini and set the configuration values from HoymilesZeroExport_Config.ini you'd like to override. The minimum config file for using AhoyDTU with a Tasmota powermeter looks like this:

[SELECT_DTU]
USE_AHOY = true

[SELECT_POWERMETER]
USE_TASMOTA = true

[AHOY_DTU]
AHOY_IP = 192.168.10.57

[TASMOTA]
TASMOTA_IP = 192.168.10.90

Then run the Docker image:

docker run -d --name hoymileszeroexport \
    -v ${PWD}/HoymilesZeroExport_Config_Override.ini:/app/HoymilesZeroExport_Config_Override.ini \
    ghcr.io/reserve85/hoymileszeroexport:main -c ./HoymilesZeroExport_Config_Override.ini

Using docker-compose:

version: '3.3'
services:
  hoymileszeroexport:
    image: ghcr.io/reserve85/hoymileszeroexport:main
    volumes:
      - ./HoymilesZeroExport_Config_Override.ini:/app/config.ini
    command: -c /app/config.ini

The script can optionally be controlled via MQTT. To enable this feature, you need to configure the [MQTT_CONFIG] section in the configuration file. Once configured, the script will listen for incoming MQTT messages on the specified topic and act accordingly.

• zeropower/set/powermeter_target_point: To change the target point of the powermeter
• zeropower/set/powermeter_max_point: To change the max point of the powermeter
• zeropower/set/powermeter_min_point: To change the min point of the powermeter
• zeropower/set/powermeter_tolerance: To change the tolerance of the powermeter
• zeropower/set/on_grid_usage_jump_to_limit_percent: To change the on grid usage jump to limit percent
• zeropower/set/on_grid_feed_fast_limit_decrease: To enable or disable the on grid feed fast limit decrease
• zeropower/set/inverter/0/min_watt_in_percent: To change the min watt in percent of the first inverter
• zeropower/set/inverter/0/normal_watt: To change the battery normal watt of the first inverter
• zeropower/set/inverter/0/reduce_watt: To change the battery reduce watt of the first inverter
• zeropower/set/inverter/0/battery_priority: To change the battery priority of the first inverter
• zeropower/set/inverter/<n>/*: To change the settings of the (n+1)th inverter

To reset a setting to its original value, you can send an empty message to the corresponding topic replacing set with reset, e.g. zeropower/reset/powermeter_target_point.

Additionally, the script will publish the following MQTT messages:

• zeropower/status: The current status of the script. Possible values are online and offline
• zeropower/state/powermeter_target_point: The current target point of the powermeter
• zeropower/state/powermeter_max_point: The current max point of the powermeter
• zeropower/state/powermeter_min_point: The current min point of the powermeter
• zeropower/state/powermeter_tolerance: The current tolerance of the powermeter
• zeropower/state/on_grid_usage_jump_to_limit_percent: The current on grid usage jump to limit percent
• zeropower/state/on_grid_feed_fast_limit_decrease: The current on grid feed fast limit decrease
• zeropower/state/inverter/0/min_watt_in_percent: The current min watt in percent of the first inverter
• zeropower/state/inverter/0/normal_watt: The current battery normal watt of the first inverter
• zeropower/state/inverter/0/reduce_watt: The current battery reduce watt of the first inverter
• zeropower/state/inverter/0/battery_priority: The current battery priority of the first inverter
• zeropower/state/inverter/<n>/*: The current settings of the (n+1)th inverter

The script can also be configured to publish log messages to MQTT. To enable this feature, you need to set MQTT_LOG_LEVEL to INFO, which will publish all log messages to the topic zeropower/log.

• https://github.com/lumapu/ahoy
• https://github.com/tbnobody/OpenDTU
• https://tasmota.github.io/docs/Smart-Meter-Interface/
• https://ottelo.jimdofree.com/stromz%C3%A4hler-auslesen-tasmota/
• https://hessburg.de/tasmota-wifi-smartmeter-konfigurieren/

Please support me if you like this project by spending me a coffee instead of giving away your electricity.