This library implements a python driver for SPI-connected ILI9341 LCD displays.
Only the 4-wire SPI interface having an additional data-control select pin
DC/X is supported.
It takes inspiration from Adafruit_Python_ILI9341 project. Most constants and
some of the timing values are copied as is. The focus is to display arbitrary
image in the display and increase SPI bandwidth-limited framerate by doing
automatic partial updates.
- Supports a variety of hardware and software interfaces:
- Spidev + Gpiod
- Mraa
- Pyftdi
- Fast and efficient buffer update, taking advantage of the partial update commands of the ILI9341 chip.
The host needs to have an SPI connection along with a general GPIO output for
the DC/X pin. The library does one way communication only and as such, the
MISO pin can be left unconnected. Connections for the tests are described in
the test scripts and is printed during test invocation.
The tests were done using a 2.8inch ILI9341 display. The datasheet of the LCD driver chip can be found here.
Here some examples of using different interfaces with Raspberry Pi 3B+.
from ili9341.ili9341_spidev import Ili9341Spidev
# Hardware connection:
# ------------------------------------------------------------------
# [RPi2B Compat. Host] <---> [Display]
# ==================================================================
# Pin-19/GPIO-10/MOSI <---> MOSI (Main-Out-Sub-In)
# Pin-23/GPIO-11/SCLK <---> SCLK (SPI-Clock)
# Pin-24/GPIO-8/SPI0-CE0 <---> CS/X (SPI-Chip-Select)
# Pin-22/GPIO-25 <---> DC/X (Data/Control Select for ILI9341)
# 3.3V+ <---> RST (We are not using reset pin)
# 3.3V+ <---> LED (No software illumination control)
lcd = Ili9341Spidev(
spidev_device_path="/dev/spidev0.0",
gpiod_device_path="/dev/gpiochip0",
dcx_pin_id=25,
rst_pin_id=None,
spi_clock_hz=42_000_000,
spi_data_chunk_size=2048)
# Clear the screen to white.
lcd.clear((0xFF, 0xFF, 0xFF))
# Draw a red rectangle.
lcd.framebuff[10:20, 10:40, :] = (0xFF, 0, 0)
lcd.update()from ili9341.ili9341_pyftdi import Ili9341Pyftdi
# Hardware connection:
# -------------------------------------------------------------------
# [FT232H] <---> [Display]
# ===================-===============================================
# D0 <---> SCLK (SPI-Clock)
# D1 <---> MOSI (Main-Out-Sub-In)
# D3 <---> CS/X (SPI-Chip-Select)
# D4 <---> DC/X (Data/Control Select for ILI9341)
# 3.3V+ <---> RST (We are not using reset pin)
# 3.3V+ <---> LED (No software illumination control)
lcd = Ili9341Pyftdi(
pyftdi_interface_path="ftdi:https://ftdi:232h/1",
dcx_pin_id=4,
rst_pin_id=None,
spi_clock_hz=42_000_000,
spi_data_chunk_size=2048)
# Clear the screen to white.
lcd.clear((0xFF, 0xFF, 0xFF))
# Draw a red rectangle.
lcd.framebuff[10:20, 10:40, :] = (0xFF, 0, 0)
lcd.update()from ili9341.ili9341_mraa import Ili9341Mraa
# Hardware connection:
# ------------------------------------------------------------------
# [RPi2B Compat. Host] <---> [Display]
# ==================================================================
# Pin-19/GPIO-10/MOSI <---> MOSI (Main-Out-Sub-In)
# Pin-23/GPIO-11/SCLK <---> SCLK (SPI-Clock)
# Pin-24/GPIO-8/SPI0-CE0 <---> CS/X (SPI-Chip-Select)
# Pin-22/GPIO-25 <---> DC/X (Data/Control Select for ILI9341)
# 3.3V+ <---> RST (We are not using reset pin)
# 3.3V+ <---> LED (No software illumination control)
lcd = Ili9341Mraa(
spi_id: 0,
dcx_pin_id: 22,
rst_pin_id=None,
spi_clock_hz=42_000_000,
spi_data_chunk_size=2048)
# Clear the screen to white.
lcd.clear((0xFF, 0xFF, 0xFF))
# Draw a red rectangle.
lcd.framebuff[10:20, 10:40, :] = (0xFF, 0, 0)
lcd.update()The image and video inside the tests/ directory are of my daughter. Isn't she
adorable? ^_^
As part of my graduate research at University of South Carolina, Autonomous Field Robotics Lab, my team embarked on a journey to make customized control and user interface for an underwater autonomous robot, BlueROV from ground up. To save some CPU cycles, using an SPI display seemed like a good idea, instead of an HDMI display with Xorg/fbdev.
The Mraa interface was developed at first. Development was done with a Raspberry Pi 3B+ and was later deployed on an 'Up Squared' - an X86 SBC.
We had to change the host computer in the middle of the design process and Mraa interface didn't have support for the upgraded 'Up Squared V2' SBC. So, we switched to Spidev + gpiod interface. Turns out, the Spidev driver for this device is buggy and can not go beyond 1MHz. As an workaround, I developed another interface based on FT232 USB-to-GPIO interface.
This software is distributed under MIT license. Look at the LICENSE file for
the terms of distribution.
2024 Titon Barua <[email protected], [email protected]>