Inception is a set of tools for auto configuring android devices. You can do the following:
- Include any apps to be (pre)installed
- Remove any stock apps
- Root the device
- Install busybox
- Configure Wifi networks
- Generate all device settings
- Patch APKs
- Replace Kernel, and/or ramdisk data in both boot and recovery imgs
- Place your adb keys, configure USB debugging
- You bootstrap a new device configuration
- Update the bootstrapped config, which is a JSON file, with all the changes you need
- inception will compile your config into an Android OTA update package
- Install the update package to your device in recovery mode
- Or optionally let inception generate a cache partition img for your device, allowing you to deploy your update in bootloader/download mode
- No ROM compilation is involved.
Inception does not create a full system image or compile roms. It bundles only the required changes in an Android update package and generates an update script which applies those changes. This results in update packages that are substantially smaller than when flashing a whole ROM.
- FLASHING DEVICES VOID THEIR WARRANTY
- USE AT YOUR OWN RISK, I'M NOT RESPONSIBLE FOR BRICKING YOUR DEVICE.
incept bootstrap --base inception.device --variant myconfig
This will generate a configuration file for your variant
Use the following command to list current available variants
incept ls -l
Outputs:
Variants:
=========
inception.android.common ~/.inception/variants/inception/android/common/common.json
inception.device.myconfig ~/.inception/variants/inception/device/myconfig/myconfig.json
Edit ~/.inception/variants/inception/device/myconfig/myconfig.json
Override device settings, add wifi settings, add some apps, root the device and install busybox
For example:
{
"__extends__": "inception.device",
"device": {
"name": "custom"
},
"update": {
"__make__": true,
"root_method": "supersu",
"busybox": {
"__make__": true
},
"network": {
"aps": [
{
"ssid": "Home network",
"security": "WPA-PSK",
"key": "CE3000FEED"
}
]
},
"apps": {
"com.whatsapp": {
"apk": "myapps/whatsapp.apk"
}
}
}
}
then:
incept make --variant inception.device.myconfig
This will generate:
~/.inception/out/inception/device/myconfig/update.zip
Which is an OTA android update that you can install in several ways.
Hint You will find the full config that generated the OTA package at:
~/.inception/out/inception/device/myconfig/config.json
Inspect that file to see how a full config looks like, override any properties in your original config, run make again and see your changes easily going through.
- Config file structure
- Support any device
- Create Auto-Root packages
- Rooting devices
- Config sources
- Makers/Submakers
- FAQ
- For installation:
- python < 3.0
- python-setuptools
- swig
- dulwich
- argparse
- For incept learn and incept bootstrap --learn-* (optional):
- adb >= 1.1.1
- libssl-dev
- dpkg-dev on debian distros, because: https://github.com/martinpaljak/M2Crypto/issues/62
- For some 32bit binaries that are included in base configs (namely make_ext4s), unless overridden:
- gcc-multilib
- lib32z1
- For patching APKs
- libstdc++6 and/or lib32stdc++6
git clone https://github.com/tgalal/inception.git
python setup.py install
or
pip install inception-android
Here is also a docker container for inception
docker pull tgalal/inception
inception is licensed under the GPLv3+: http:https://www.gnu.org/licenses/gpl-3.0.html.
ui_print("");
ui_print(".__ __ .___");
ui_print("|__| ____ ____ ____ _______/ |_ ____ __| _/");
ui_print("| |/ \_/ ___\/ __ \____ \ __\/ __ \ / __ | ");
ui_print("| | | \ \__\ ___/| |_> > | \ ___// /_/ | ");
ui_print("|__|___| /\___ >___ > __/|__| \___ >____ | ");
ui_print(" \/ \/ \/|__| \/ \/ ");
ui_print("");