- Setting
disk_size
orremote_access
does not make any changes - I received an error:
expect exactly one securityGroup tagged with kubernetes.io/cluster/<NAME> ...
- Why are nodes not being registered?
- Why are there no changes when a node group's
desired_size
is modified? - How do I access compute resource attributes?
- What add-ons are available?
- What configuration values are available for an add-on?
disk_size
, and remote_access
can only be set when using the EKS managed node group default launch template. This module defaults to providing a custom launch template to allow for custom security groups, tag propagation, etc. If you wish to forgo the custom launch template route, you can set use_custom_launch_template = false
and then you can set disk_size
and remote_access
.
By default, EKS creates a cluster primary security group that is created outside of the module and the EKS service adds the tag { "kubernetes.io/cluster/<CLUSTER_NAME>" = "owned" }
. This on its own does not cause any conflicts for addons such as the AWS Load Balancer Controller until users decide to attach both the cluster primary security group and the shared node security group created by the module (by setting attach_cluster_primary_security_group = true
). The issue is not with having multiple security groups in your account with this tag key:value combination, but having multiple security groups with this tag key:value combination attached to nodes in the same cluster. There are a few ways to resolve this depending on your use case/intentions:
<CLUSTER_NAME>
below needs to be replaced with the name of your cluster
- If you want to use the cluster primary security group, you can disable the creation of the shared node security group with:
create_node_security_group = false # default is true
attach_cluster_primary_security_group = true # default is false
- By not attaching the cluster primary security group. The cluster primary security group has quite broad access and the module has instead provided a security group with the minimum amount of access to launch an empty EKS cluster successfully and users are encouraged to open up access when necessary to support their workload.
attach_cluster_primary_security_group = false # this is the default for the module
In theory, if you are attaching the cluster primary security group, you shouldn't need to use the shared node security group created by the module. However, this is left up to users to decide for their requirements and use case.
If you choose to use Custom Networking, make sure to only attach the security groups matching your choice above in your ENIConfig resources. This will ensure you avoid redundant tags.
Nodes not being able to register with the EKS control plane is generally due to networking mis-configurations.
- At least one of the cluster endpoints (public or private) must be enabled.
If you require a public endpoint, setting up both (public and private) and restricting the public endpoint via setting cluster_endpoint_public_access_cidrs
is recommended. More info regarding communication with an endpoint is available here.
- Nodes need to be able to contact the EKS cluster endpoint. By default, the module only creates a public endpoint. To access the endpoint, the nodes need outgoing internet access:
- Nodes in private subnets: via a NAT gateway or instance along with the appropriate routing rules
- Nodes in public subnets: ensure that nodes are launched with public IPs (enable through either the module here or your subnet setting defaults)
Important: If you apply only the public endpoint and configure the cluster_endpoint_public_access_cidrs
to restrict access, know that EKS nodes will also use the public endpoint and you must allow access to the endpoint. If not, then your nodes will fail to work correctly.
-
The private endpoint can also be enabled by setting
cluster_endpoint_private_access = true
. Ensure that VPC DNS resolution and hostnames are also enabled for your VPC when the private endpoint is enabled. -
Nodes need to be able to connect to other AWS services to function (download container images, make API calls to assume roles, etc.). If for some reason you cannot enable public internet access for nodes you can add VPC endpoints to the relevant services: EC2 API, ECR API, ECR DKR and S3.
The module is configured to ignore this value. Unfortunately, Terraform does not support variables within the lifecycle
block. The setting is ignored to allow autoscaling via controllers such as cluster autoscaler or Karpenter to work properly and without interference by Terraform. Changing the desired count must be handled outside of Terraform once the node group is created.
Examples of accessing the attributes of the compute resource(s) created by the root module are shown below. Note - the assumption is that your cluster module definition is named eks
as in module "eks" { ... }
:
- EKS Managed Node Group attributes
eks_managed_role_arns = [for group in module.eks_managed_node_group : group.iam_role_arn]
- Self Managed Node Group attributes
self_managed_role_arns = [for group in module.self_managed_node_group : group.iam_role_arn]
- Fargate Profile attributes
fargate_profile_pod_execution_role_arns = [for group in module.fargate_profile : group.fargate_profile_pod_execution_role_arn]
The available EKS add-ons can be found here. You can also retrieve the available addons from the API using:
aws eks describe-addon-versions --query 'addons[*].addonName'
You can retrieve the configuration value schema for a given addon using the following command:
aws eks describe-addon-configuration --addon-name <value> --addon-version <value> --query 'configurationSchema' --output text | jq
For example:
aws eks describe-addon-configuration --addon-name coredns --addon-version v1.11.1-eksbuild.8 --query 'configurationSchema' --output text | jq
Returns (at the time of writing):
{
"$ref": "#/definitions/Coredns",
"$schema": "https://json-schema.org/draft-06/schema#",
"definitions": {
"Coredns": {
"additionalProperties": false,
"properties": {
"affinity": {
"default": {
"affinity": {
"nodeAffinity": {
"requiredDuringSchedulingIgnoredDuringExecution": {
"nodeSelectorTerms": [
{
"matchExpressions": [
{
"key": "kubernetes.io/os",
"operator": "In",
"values": [
"linux"
]
},
{
"key": "kubernetes.io/arch",
"operator": "In",
"values": [
"amd64",
"arm64"
]
}
]
}
]
}
},
"podAntiAffinity": {
"preferredDuringSchedulingIgnoredDuringExecution": [
{
"podAffinityTerm": {
"labelSelector": {
"matchExpressions": [
{
"key": "k8s-app",
"operator": "In",
"values": [
"kube-dns"
]
}
]
},
"topologyKey": "kubernetes.io/hostname"
},
"weight": 100
}
]
}
}
},
"description": "Affinity of the coredns pods",
"type": [
"object",
"null"
]
},
"computeType": {
"type": "string"
},
"corefile": {
"description": "Entire corefile contents to use with installation",
"type": "string"
},
"nodeSelector": {
"additionalProperties": {
"type": "string"
},
"type": "object"
},
"podAnnotations": {
"properties": {},
"title": "The podAnnotations Schema",
"type": "object"
},
"podDisruptionBudget": {
"description": "podDisruptionBudget configurations",
"enabled": {
"default": true,
"description": "the option to enable managed PDB",
"type": "boolean"
},
"maxUnavailable": {
"anyOf": [
{
"pattern": ".*%$",
"type": "string"
},
{
"type": "integer"
}
],
"default": 1,
"description": "minAvailable value for managed PDB, can be either string or integer; if it's string, should end with %"
},
"minAvailable": {
"anyOf": [
{
"pattern": ".*%$",
"type": "string"
},
{
"type": "integer"
}
],
"description": "maxUnavailable value for managed PDB, can be either string or integer; if it's string, should end with %"
},
"type": "object"
},
"podLabels": {
"properties": {},
"title": "The podLabels Schema",
"type": "object"
},
"replicaCount": {
"type": "integer"
},
"resources": {
"$ref": "#/definitions/Resources"
},
"tolerations": {
"default": [
{
"key": "CriticalAddonsOnly",
"operator": "Exists"
},
{
"effect": "NoSchedule",
"key": "node-role.kubernetes.io/control-plane"
}
],
"description": "Tolerations of the coredns pod",
"items": {
"type": "object"
},
"type": "array"
},
"topologySpreadConstraints": {
"description": "The coredns pod topology spread constraints",
"type": "array"
}
},
"title": "Coredns",
"type": "object"
},
"Limits": {
"additionalProperties": false,
"properties": {
"cpu": {
"type": "string"
},
"memory": {
"type": "string"
}
},
"title": "Limits",
"type": "object"
},
"Resources": {
"additionalProperties": false,
"properties": {
"limits": {
"$ref": "#/definitions/Limits"
},
"requests": {
"$ref": "#/definitions/Limits"
}
},
"title": "Resources",
"type": "object"
}
}
}
Note
The available configuration values will vary between add-on versions, typically more configuration values will be added in later versions as functionality is enabled by EKS.