This is an instruction to run your own SMM code.

In this document, we will walk-through:

• building a custom SMM module as part of OVMF-based BIOS,
• loading the OVMF-based BIOS onto QEMU, and
• embedding the custom SMM module into existing device's BIOS.

HelloSmm is the custom SMM module used in this instruction. This SMM module receives any SMI and simply logs SMI command numbers (video)

• Ubuntu host or Ubuntu on WSL.
• The target device with serial output. I use MinnowBoard Turbot and SS-TTL3VT.
• The SPI programmer. I use SF100.
  • If you are going to test on QEMU only, those two are not required.

High-level steps to test against a physical device are as follows:

1. Building the custom SMM module
2. Get the BIOS image and embed HelloSmm
3. Flash the modified BIOS image

To build HelloSmm, first, check out the repositories:

$ git clone https://github.com/tandasat/HelloSmm.git
$ git clone -b edk2-stable202011 --recurse-submodules https://github.com/tianocore/edk2
$ cp -r HelloSmm/HelloSmm edk2/OvmfPkg

Open edk2/OvmfPkg/OvmfPkgIa32X64.dsc and add a dependency to HelloSmm.inf

  #
  # Variable driver stack (SMM)
  #
  ...
  OvmfPkg/HelloSmm/HelloSmm.inf

Similarly, open edk2/OvmfPkg/OvmfPkgIa32X64.dsc and add a a dependency to HelloSmm.inf

#
# Variable driver stack (SMM)
#
...
INF  OvmfPkg/HelloSmm/HelloSmm.inf

Then, build the BIOS image.

$ python3 -m venv ovmf_env
$ source ovmf_env/bin/activate
$ pip3 install --upgrade -r pip-requirements.txt
$ sudo apt-get install mono-complete

$ cd edk2/
$ stuart_setup -c OvmfPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=GCC5 -a IA32,X64
$ stuart_update -c OvmfPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=GCC5 -a IA32,X64
$ python3 BaseTools/Edk2ToolsBuild.py -t GCC5
$ stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -a IA32,X64 TOOL_CHAIN_TAG=GCC5 BLD_*_SMM_REQUIRE=1 BLD_*_DEBUG_ON_SERIAL_PORT=1

(If you are going test on QEMU, omit BLD_*_DEBUG_ON_SERIAL_PORT=1 in the last command.)

The above steps install dependencies under the virtual environment called ovmf_env, and build the OvmfPkg package for 32bit PEI, 64bit DXE (including HelloSmm) as edk2/Build/Ovmf3264/DEBUG_GCC5/FV/OVMF.fd.

Simply, start QEMU with the compiled BIOS.

# If you are on WSL, install vcxsrv (https://sourceforge.net/projects/vcxsrv/)
# and start XLaunch first, then:

$ export DISPLAY=0:0
$ stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -a IA32,X64 TOOL_CHAIN_TAG=GCC5 BLD_*_SMM_REQUIRE=1 --FlashOnly

You should see multiple SMI 0x00 logged by the HelloSMM.

To test on the physical device, get the BIOS image of the target device first by either,

• using a SPI programmer to keep the current BIOS, or
• downloading a BIOS image if available

Next, embed the compiled custom SMM module into the BIOS image.

1. Download UEFITool with the old engine. The latest version is 0.28.0 as of this writing.
2. Open the base BIOS image and search E94F54CD-81EB-47ED-AEC3-856F5DC157A9
   • 
3. Right click, and Insert after..
   • 
4. Select edk2/Build/Ovmf3264/DEBUG_GCC5/FV/Ffs/A0F56EC8-CAC5-460B-8D1F-DBF4A0836C80HelloSmm/A0F56EC8-CAC5-460B-8D1F-DBF4A0836C80.ffs
   • 
5. Save the modified BIOS image.

Finally, wite the modified BIOS image onto the target device.

1. Physically connect the SPI programmer with the target.
   • 
2. Start DediProg Engineering, click the File button, and select the modified BIOS image.
   • 
3. Click Batch button to write the image to the SPI flash.
   • 
4. Disconnect the programmer from the device.

To verify your custom SMM is loaded and active, connect to the target device through the serial port to view logs, then start the target device. You should see SMI is logged onto the serial session. Easy😻

• Building OVMF - https://github.com/tianocore/edk2/tree/master/OvmfPkg/PlatformCI
• About mono dependency -https://listman.redhat.com/archives/edk2-devel-archive/2020-August/msg00823.html