The Sentry Relay is a service that pushes some functionality from the Sentry SDKs as well as the Sentry server into a proxy process.
- Product documentation can be found at: https://docs.sentry.io/meta/relay/.
- Code and development documentation can be found at: https://getsentry.github.io/relay/.
Like Sentry, Relay is licensed under the BSL. See the LICENSE
file and this
forum post
for more information.
To build Relay, we require the latest stable Rust. The crate is split into a
workspace with multiple features, so when running building or running tests
always make sure to pass the --all
and --all-features
flags.
The processing
feature additionally requires a C compiler and CMake.
To install the development environment, librdkafka must be installed and on the
path. On macOS, we require to install it with brew install librdkafka
, as the installation script uses brew --prefix
to determine the correct location.
We use VSCode for development. This repository contains settings files configuring code style, linters, and useful features. When opening the project for the first time, make sure to install the Recommended Extensions, as they will allow editor assist during coding.
The root of the repository contains a Makefile
with useful commands for
development:
make check
: Runs code formatting checks and linters. This is useful before opening a pull request.make test
: Runs unit tests, integration tests and Python package tests (see below for more information).make all
: Runs all checks and tests. This runs most of the tasks that are also performed in CI.make clean
: Removes all build artifacts, the virtualenv and cached files.
For more avalibale make targets, please, run make help
.
Integration tests require Redis and Kafka running in their default
configuration. The most convenient way to get all required services is via
sentry devservices
, which
requires an up-to-date Sentry development environment.
The easiest way to rebuild and run Relay for development is using cargo
.
Depending on the configuration, you may need to have a local instance of Sentry
running.
# Initialize Relay for the first time
cargo run --all-features -- config init
# Rebuild and run with all features
cargo run --all-features -- run
The standard build commands are also available as make
targets. Note that
release builds still generate debug information.
# Build without optimizations in debug mode.
make build
# Build with release optimizations and debug information.
make release
For quickly verifying that Relay compiles after making some changes, you can
also use cargo check
:
cargo check --all --all-features
By default, Relay compiles without processing mode. This is the configuration used for Relays operating as proxys. There are two optional features:
-
processing
: Enables event processing and ingestion functionality. This allows to enable processing in config. When enabled, Relay will produce events into a Kafka topic instead of forwarding to the configured upstream. Also, it will perform full event normalization, filtering, and rate limiting. -
ssl
: Enables SSL support in the Server. -
crash-handler
: Allows native crash reporting for segfaults and out-of-memory situations when internal error reporting to Sentry is enabled. This requirescurl
development headers and libraries on the build system.
To enable a feature, pass it to the cargo invocation. For example, to run tests
across all workspace crates with the processing
feature enabled, run:
cargo run --features=processing
The test suite comprises unit tests, an integration test suite and a separate test suite for the Python package. Unit tests are implemented as part of the Rust crates and can be run via:
# Tests for default features
make test-rust
# Run Rust tests for all features
make test-rust-all
The integration test suite requires python
. By default, the integration test
suite will create a virtualenv, build the Relay binary with processing enabled,
and run a set of integration tests:
# Create a new virtualenv, build Relay and run integration tests
make test-integration
# Build and run a single test manually
make build
.venv/bin/pytest tests/integration -k <test_name>
We use rustfmt
and clippy
from the latest stable channel for code formatting
and linting. To make sure that these tools are set up correctly and running with
the right configuration, use the following make targets:
# Format the entire codebase
make format
# Run clippy on the entire codebase
make lint
Potentially, new functionality also needs to be added to the Python package. This first requires to expose new functions in the C ABI. For this, refer to the Relay C-ABI readme.
We highly recommend to develop and test the python package in a virtual environment. Once the ABI has been updated and tested, ensure the virtualenv is active and install the package, which builds the native library. There are two ways to install this:
# Install the release build, recommended:
pip install --editable ./py
# Install the debug build, faster installation but much slower runtime:
RELAY_DEBUG=1 pip install --editable ./py
For testing, we use ubiquitous pytest
. Again, ensure that your virtualenv is
active and the latest version of the native library has been installed. Then,
run:
# Create a new virtualenv, install the release build and run tests
make test-python
# Run a single test manually
.venv/bin/pytest py/tests -k <test_name>
If you have systemfd
and cargo-watch
installed, the make devserver
command
can auto-reload Relay:
cargo install systemfd cargo-watch
make devserver
The repository contains a SSL-certificate + private key for development
purposes. It comes in two formats: Once as a (.pem, .cert)
-pair, once as
.pfx
(PKCS #12) file.
The password for the .pfx
file is password
.
To develop Relay with an existing Sentry devserver, self-hosted Sentry
installation, or Sentry SaaS, configure the upstream to the URL of the Sentry
server in .relay/config.yml
. For example, in local development set
relay.upstream
to https://localhost:8000/
.
To test processing mode with a local development Sentry, use this configuration:
relay:
# Point to your Sentry devserver URL:
upstream: https://localhost:8000/
# Listen to a port other than 3000:
port: 3001
logging:
# Enable full logging and backraces:
level: trace
enable_backtraces: true
limits:
# Speed up shutdown on ^C
shutdown_timeout: 0
processing:
# Enable processing mode with store normalization and post data to Kafka:
enabled: true
kafka_config:
- { name: "bootstrap.servers", value: "127.0.0.1:9092" }
- { name: "message.max.bytes", value: 2097176 }
redis: "redis:https://127.0.0.1"
Note that the Sentry devserver also starts a Relay in processing mode on port
3000
with similar configuration. That Relay does not interfere with your
development build. To ensure SDKs send to your development instance, update the
port in the DSN:
https://<key>@localhost:3001/<id>
We use GitHub actions to release new versions. There are two separate projects to publish:
-
Relay binary is automatically released using Calendar Versioning on a monthly basis together with
sentry
(see https://develop.sentry.dev/self-hosted/releases/), so there should be no reason to create a release manually. That said, manual releases are possible with the "Release" action. Make sure thatCHANGELOG.md
is up-to-date before running the action. -
Relay Python library along with the C-ABI are released with the "Release Library" action. Make sure that
py/CHANGELOG.md
is up-to-date before running the action. Press "Run workflow" and choose a new version. We use Semantic Versioning and release during the development cycle.
For changes exposed to the Python package, add an entry to py/CHANGELOG.md
. This includes, but is not limited to, event normalization, PII scrubbing, and the protocol.
For changes to the Relay server, please add an entry to CHANGELOG.md
under the following heading:
Features
: for new user-visible functionality.Bug Fixes
: for user-visible bug fixes.Internal
: for features and bug fixes in internal operation, especially processing mode.
To the changelog entry, please add a link to this PR (consider a more descriptive message):
- ${getCleanTitle()}. (${PR_LINK})
If none of the above apply, you can opt out by adding #skip-changelog
to the PR description.