General Concept:

Relay board controlled by a W32-ETH01 module.

Input: 5V

Produced:

• v0.5: x5 produced, x4 soldered, x3 used in production
• v0.7: x5 produced & used in production
• v0.8: Design done

ESP32 Firmware: see firmware/tinyci-fw/

Remote Relay Control script: see firmware/tinyci-fw/tinyci-relay.py

Secondary Relay board controlled by the W32-ETH01 on the main board.

Input: 5V to 12V

Produced:

• v0.1: x5 produced, x3 soldered, x2 used in production
• v0.3: x5 Produced, x0 used in production

Quad FTDI board + breakout of all FTDI I/Os with the TinyCi form factor + holes to hook a Pi/LaFrite/LePotato to control the FTDI + TinyCi USBs.

Input: USB

Produced:

• v1: x5 Produced, failed to bringup, will be replaced with OctoSerial using CH348Q

CERN OPEN HARDWARE LICENCE v1.1